Kenwood Blender BL760 User Manual

BL760 series  
BL770 series  
 
G
Use your blender for soups, drinks,  
pâtés, mayonnaise, breadcrumbs,  
biscuit crumbs, chopping nuts and  
crushing ice. Use your mill (if  
supplied) for milling herbs, nuts,  
coffee beans, spices and purées.  
don’t accidentally unscrew the  
goblet or mill jar from the blade  
assembly.  
G
G
Never run the blender empty.  
Never blend more than the  
maximum capacity stated in the  
recommended speed chart.  
To ensure long life of your blender  
and mill, do not run it for longer than  
60 seconds.  
Smoothie recipes - never blend  
frozen ingredients that have formed  
a solid mass during freezing, break it  
up before adding to the goblet.  
Don’t use the blender as a storage  
container. Keep it empty before and  
after use.  
before using your Kenwood  
appliance  
Read these instructions carefully and  
retain for future reference.  
Remove all packaging and any  
labels.  
G
G
G
G
G
Wash the parts: see ‘care and  
cleaning’.  
G
safety  
G
G
G
Always use the blender on a secure,  
dry level surface.  
Never place this appliance on or  
near a hot gas or electric burner or  
where it could touch a heated  
appliance.  
Switch off and unplug:  
G
G
G
before fitting or removing parts;  
when not in use;  
before cleaning.  
G
Never fit the blade unit to the  
power unit without the  
blender goblet or mill jar  
fitted.  
Always unplug the appliance before  
putting your hands or utensils in the  
goblet.  
Always take care when handling the  
blade assembly and avoid touching  
the cutting edge of the blades when  
cleaning.  
Only operate the blender with the lid  
in place.  
G
G
Misuse of your blender can result in  
injury.  
G
G
This appliance is not intended for  
use by persons (including children)  
with reduced physical, sensory or  
mental capabilities, or lack of  
experience and knowledge, unless  
they have been given supervision or  
instruction concerning use of the  
appliance by a person responsible  
for their safety.  
Children should be supervised to  
ensure that they do not play with the  
appliance.  
Only use the appliance for its  
intended domestic use. Kenwood  
will not accept any liability if the  
appliance is subject to improper use,  
or failure to comply with these  
instructions.  
G
G
G
G
G
G
Only use the goblet with the blade  
assembly supplied.  
Never let the power unit, cord or  
plug get wet.  
Never use a damaged appliance.  
Get it checked or repaired: see  
‘service and customer care’.  
Never use an unauthorised  
attachment.  
Liquids should be allowed to cool to  
room temperature before blending.  
Never leave the appliance  
unattended when it is operating.  
When removing the blender or mill  
from the power unit:  
G
G
G
G
G
The maximum rating is based on the  
attachment that draws the greatest  
load. Other attachments may draw  
less power.  
before plugging in  
G
Make sure your electricity supply is  
the same as the one shown on the  
underside of the appliance.  
G
wait until the blades have  
completely stopped;  
Download from Www.Somanuals.com2. All Manuals Search And Download.  
Important - UK only  
The wires in the cord are coloured  
as follows:  
to use your blender  
1 Fit the sealing ring to the blender  
G
blade unit marked  
– ensuring  
Blue = Neutral  
the seal is located correctly in the  
grooved area.  
Leaking will occur if the seal  
is damaged or incorrectly  
fitted.  
Brown = Live.  
The appliance must be protected by  
a 13A approved (BS1362) fuse.  
G
G
G
Note:  
For non-rewireable plugs the fuse  
cover MUST be refitted when  
replacing the fuse. If the fuse cover  
is lost then the plug must not be  
used until a replacement can be  
obtained. The correct fuse cover is  
identified by colour and a  
replacement may be obtained from  
your Kenwood Authorised Repairer  
(see Service).  
2 Clip the blade unit into the base  
.  
3 Screw the blade assembly onto the  
goblet – ensuring the blade  
assembly is fully tightened.  
4 Put your ingredients into the goblet.  
Never blend more than 1.6  
litres or more than 1 litre for  
frothy liquids like milkshakes.  
5 Fit the filler cap to the lid.  
6 Fit the lid by pushing down until  
secure.  
7 Place the blender onto the power  
unit.  
The appliance won’t work if  
the blender is incorrectly  
fitted.  
G
If a non-rewireable plug is cut off it  
must be DESTROYED  
IMMEDIATELY. An electric shock  
hazard may arise if an unwanted  
non-rewireable plug is inadvertently  
inserted into a 13A socket outlet.  
This appliance conforms to EC  
directive 2004/108/EC on  
Electromagnetic Compatibility and  
EC regulation no. 1935/2004 of  
27/10/2004 on materials intended  
for contact with food.  
G
G
8 Plug in and the 4 pre-program  
buttons will light up.  
9 Choose one of the following options:  
G
Select one of the 4 pre-programmed  
buttons (refer to the function selector  
chart). When the required program  
button is pressed the lights on the  
other 3 buttons will go out. The  
blender will switch off automatically  
at the end of the pre-set time. If you  
wish to stop before the pre-set time,  
press the selected program button  
again.  
key  
blender  
filler cap  
lid  
goblet  
blender sealing ring  
blender blade unit  
base  
speed + pulse control  
pre-programmed buttons  
power unit  
cord storage  
mill (if supplied)  
mill jar  
mill sealing ring  
mill blade unit  
mill base  
G
Select speed 1 (low) to 5 (High) by  
turning the speed control. At the end  
of blending return the speed control  
to “0” before removing the blender.  
G
(P) Pulse – operates the motor in a  
start/stop action. The pulse will  
operate for as long as it is held in  
position.  
mill lid  
Download from Www.Somanuals.com3. All Manuals Search And Download.  
G
NOTE: The pre-program lights will  
flash under the following  
circumstances  
When making mayonnaise, put all  
the ingredients, except the oil, into  
the blender. Remove the filler cap.  
Then, with the appliance running,  
add the oil slowly through the hole in  
the lid.  
Thick mixtures, e.g. pâtés and dips,  
may need scraping down. If the  
mixture is difficult to process, add  
more liquid.  
G
G
The power unit is plugged in but the  
goblet is not fitted to the power unit.  
The goblet is removed from the  
power unit without switching the  
speed control to “0”.  
The power unit will not operate until  
the control is turned to “0” and a  
speed is reselected.  
G
G
G
hints  
To blend dry ingredients - cut into  
pieces, remove the filler cap, then  
with the machine running, drop the  
pieces down one by one. Keep your  
hand over the opening. For best  
results empty regularly.  
pre-program setting speed chart  
During operation of the pre-program settings a change in speed  
may be noted - this is normal  
pre-program  
setting  
pre-set  
operating  
time  
usage  
max qty  
Drinks and cocktails  
1.6 litres  
1 litre  
Frothing milk and milkshakes  
Smoothie drinks  
1 litre liquid 60 seconds  
Place the fresh fruit and liquid  
ingredients in first (includes  
yoghurt, milk and fruit juices).  
Then add ice or frozen ingredients  
(includes frozen fruit, ice or  
ice cream)  
Stock based soups  
Soups using milk  
1.6 litres  
1 litre  
30 seconds  
Liquids should be allowed to cool to room temperature  
before blending.  
Note: Slow start when program selected.  
Dips, fruit and vegetable purées  
(add liquid if difficult to process).  
200g  
60 seconds  
Mayonnaise  
1 egg  
150 mls oil  
Ice Crushing  
Automatic pulsing action  
8 cubes  
150g  
30 seconds  
Download from Www.Somanuals.com4. All Manuals Search And Download.  
7 After milling, you can replace the  
blade assembly with the mill lid.  
to use your mill (if supplied)  
1 Put your ingredients into the jar.  
(Refer to the mill recommended  
usage chart).  
hints  
G
For optimum performance when  
processing spices we recommend  
that you do not process more than  
50g at a time in the mill.  
2 Fit the sealing ring into the mill  
blade unit marked  
– ensuring the  
seal is located correctly in the  
grooved area.  
G
Whole spices retain their flavour for a  
much longer time than ground  
spices so it is best to grind a small  
quantity fresh at a time to retain the  
flavour.  
To release the maximum flavour and  
essential oils whole spices are best  
roasted prior to milling.  
G
Ensure that the seal is fitted  
correctly.  
3 Then clip the blade unit into the  
mill base .  
4 Turn the mill blade assembly upside  
down. Lower it into the jar, blades  
down. Turn in a clockwise direction  
to lock.  
5 Place the mill onto the power unit.  
6 Select a speed or use the pulse  
control. (Refer to the mill  
G
G
Herbs are best chopped when clean  
and dry.  
recommended usage chart).  
mill recommended usage chart  
Ingredients  
Nuts  
Max Qty  
50g  
Speed  
Operating time  
10 seconds  
5
Coffee Beans  
50g  
5
30 seconds  
Uncooked Meat  
Beef Steak - cut into 2 ⁄2 cm cubes  
Herbs  
100g  
Pulse  
5 seconds  
1
10g  
5
5
5 seconds  
Baby Food & Fruit Purees  
100g  
50g  
30 seconds  
30-60 seconds  
Spices - black peppercorns,  
cardamom seeds, cumin seeds,  
coriander seeds, fennel seeds and  
whole cloves  
G
Store excess cord in the storage  
area at the back of the power  
unit .  
care and cleaning  
G
Always switch off, unplug and  
dismantle before cleaning.  
Empty the goblet before unscrewing  
it from the blade unit.  
Don’t immerse the blade unit  
in water.  
The blender goblet and mill jar can  
be washed in your dishwasher.  
blade assembly  
G
1 Unscrew the blender or mill base  
from the goblet. Then remove the  
blade unit by pushing up from  
underneath.  
Care should be taken when  
removing the blade unit from  
the blender or mill base.  
G
G
G
power unit  
G
Wipe with a damp cloth, then dry.  
G
Don’t immerse the power unit in  
water.  
Download from Www.Somanuals.com5. All Manuals Search And Download.  
2 Remove and wash the sealing ring.  
3 Don’t touch the sharp blades –  
brush them clean using hot soapy  
water, then rinse thoroughly under  
the tap. Don’t immerse the  
blade unit in water.  
4 Leave to dry upside down.  
IMPORTANT INFORMATION FOR  
CORRECT DISPOSAL OF THE  
PRODUCT IN ACCORDANCE  
WITH EC DIRECTIVE  
other parts  
Wash by hand, then dry.  
2002/96/EC.  
service and customer  
care  
At the end of its working life, the product  
must not be disposed of as urban  
waste.  
It must be taken to a special local  
authority differentiated waste collection  
centre or to a dealer providing this  
service.  
G
If the cord is damaged it must, for  
safety reasons, be replaced by  
KENWOOD or an authorised  
KENWOOD repairer.  
UK  
Disposing of a household appliance  
separately avoids possible negative  
consequences for the environment and  
health deriving from inappropriate  
disposal and enables the constituent  
materials to be recovered to obtain  
significant savings in energy and  
resources. As a reminder of the need to  
dispose of household appliances  
separately, the product is marked with  
a crossed-out wheeled dustbin.  
If you need help with:  
using your appliance or  
servicing, spare parts or repairs (in or  
out of guarantee)  
call Kenwood customer care on 023  
9239 2333. Have your model  
number (ie BL760 or BL770)  
and date code (4 digit code  
ie 9T03) ready. They are on the  
underside of the power unit.  
G
G
G
spares and attachments  
call 0870 2413653.  
guarantee (uk only)  
G
other countries  
If your blender goes wrong within  
one year from the date you bought  
it, we will repair it (or replace it if  
necessary) free of charge provided:  
you have not misused, neglected or  
damaged it;  
Contact the shop where you bought  
your appliance.  
G
Designed and engineered by  
G
Kenwood in the UK.  
G
Made in China.  
G
it has not been modified (unless by  
Kenwood);  
G
it is not second-hand;  
G
it has not been used commercially;  
G
you have not fitted a plug incorrectly;  
and  
G
you supply your receipt to  
show when you bought it.  
This guarantee does not affect your  
statutory rights.  
Download from Www.Somanuals.com6. All Manuals Search And Download.  
Head Office Address:  
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK  
Designed and engineered by Kenwood in the UK  
19564/1  
Made in China  
 

Integra DVD Player DPC 52 User Manual
Intel Computer Hardware PM945GC 478 User Manual
Invacare Mobility Aid IH6065 User Manual
JL Audio Car Speaker 94429 User Manual
Jotul Fan F 100 USA User Manual
JVC CRT Television C T1421 User Manual
JVC Flat Panel Television 0808TKH FU FU User Manual
JVC Portable CD Player XL PG38SL User Manual
JVC Speaker CS AW8540 User Manual
KitchenAid Ventilation Hood KBRA20EMWH00 User Manual