Kenwood Car Stereo System DPX 3030 User Manual

DOUBLE DIN SIZED CD/CASSETTE RECEIVER  
-
DPX MP4030  
INSTRUCTION MANUAL  
-
DPX 3030S  
-
DPX 3030  
© B64-2319-10/05 (M;TKR)  
 
Safety precautions  
IMPORTANT INFORMATION  
2WARNING  
2CAUTION  
About the disc changer/CD player to  
To prevent injury or fire, take the  
following precautions:  
• Insert the unit all the way in until it is fully  
locked in place. Otherwise it may fall out of  
place when jolted.  
• When extending the ignition, battery, or  
ground wires, make sure to use automotive-  
grade wires or other wires with a 0.75mm2  
(AWG18) or more to prevent wire  
deterioration and damage to the wire  
coating.  
To prevent a short circuit, never put or leave  
any metallic objects (such as coins or metal  
tools) inside the unit.  
To prevent damage to the machine,  
take the following precautions:  
• Make sure to ground the unit to a negative  
12V DC power supply.  
• Do not open the top or bottom covers of the  
unit.  
• Do not install the unit in a spot exposed to  
direct sunlight or excessive heat or humidity.  
Also avoid places with too much dust or the  
possibility of water splashing.  
• When replacing a fuse, only use a new one  
with the prescribed rating. Using a fuse with  
the wrong rating may cause your unit to  
malfunction.  
To prevent a short circuit when replacing a  
fuse, first disconnect the wiring harness.  
• Do not use your own screws. Use only the  
screws provided. If you use the wrong  
screws, you could damage the unit.  
be connected:  
To connect a disc changer having the "O-N"  
switch to this unit, set the "O-N" switch to "N".  
Note that none of the KDC-C100, KDC-C302,  
C205, C705, and non-Kenwood CD changers  
can be connected.  
You can damage both your unit and the CD  
changer if you connect them incorrectly.  
Precautions when connecting disc  
changers/CD players released in 1997 or  
earlier.  
When you connect a model with no "O-N"  
switch, the converter cord CA-DS100 available  
as an option may be required. For details,  
consult your Kenwood dealer.  
A disc changer doesn't work when it is  
connected without using these options.  
If a model with no "O-N" switch is connected,  
some unavailable functions and information  
that cannot be displayed are generated.  
• If the unit starts to emit smoke or strange  
smells, turn off the power immediately and  
consult your Kenwood dealer.  
• Make sure not to get your fingers caught  
between the faceplate and the unit.  
• Be careful not to drop the unit or subject it to  
strong shock.  
The unit may break or crack because it  
contains glass parts.  
• Do not touch the liquid crystal fluid if the  
LCD is damaged or broken due to shock. The  
liquid crystal fluid may be dangerous to your  
health or even fatal.  
Do Not Load 3-in. CDs in the CD slot  
If you try to load a 3 in. CD with its adapter  
into the unit, the adapter might separate from  
the CD and damage the unit.  
If the liquid crystal fluid from the LCD  
contacts your body or clothing, wash it off  
with soap immediately.  
Manufactured under license from Dolby  
Laboratories.  
“Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
— 3 —  
 
Safety precautions  
Cleaning the Unit  
The marking of products using lasers  
(Except for some areas)  
NOTE  
If the faceplate of this unit is stained, wipe it  
with a dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain  
off with a cloth moistened with neutral  
cleaner, then wipe neutral detergent off.  
Applying spray cleaner directly to the unit may  
affect its mechanical parts. Wiping the  
• If you experience problems during  
installation, consult your Kenwood dealer.  
CLASS 1  
LASER PRODUCT  
• If the unit does not seem to be working  
right, try pressing the reset button first. If  
that does not solve the problem, consult  
your Kenwood dealer.  
• Press the reset button if the Disc auto  
changer fails to operate correctly. Normal  
operation should be restored.  
The label is attached to the chassis/case and  
says that the component uses laser beams  
that have been classified as Class 1. It  
means that the unit is utilizing laser beams  
that are of a weaker class. There is no  
danger of hazardous radiation outside the  
unit.  
faceplate with a hard cloth or using a volatile  
liquid such as thinner or alcohol may scratch  
the surface or erases characters.  
Cleaning the CD Slot  
As dust tends to accumulate in the CD slot,  
clean it every once in a while. Your CDs can  
get scratched if you put them in a dusty CD  
slot.  
DISC  
DISP  
NAME  
COLOR  
S.A  
SRC  
AUD  
SCN  
PWR OFF  
B.NR  
SCRL  
MTL  
FNC  
B.S  
M.RDM  
RDM  
REP  
ATT  
Reset button  
• Characters in the LCD may become difficult  
to read in temperatures below 41 ˚F (5 ˚C).  
• The illustrations of the display and the panel  
appearing in this manual are examples used  
to explain more clearly how the controls are  
used. Therefore, what appears on the display  
in the illustrations may differ from what  
appears on the display on the actual  
equipment, and some of the illustrations on  
the display may represent something  
impossible in actual operation.  
Lens Fogging  
Right after you turn on the car heater in cold  
weather, dew or condensation may form on  
the lens in the CD player of the unit. Called  
lens fogging, CDs may be impossible to play.  
In such a situation, remove the disc and wait  
for the condensation to evaporate. If the unit  
still does not operate normally after a while,  
consult your Kenwood dealer.  
— 4 —  
 
About CDs  
About Cassette tape  
Handling CDs  
• Don’t touch the recording surface of the CD.  
CD cleaning  
Clean from the center of the disc and move  
outward.  
Cleaning the tape head  
When there’s noise or the sound quality is bad  
during tape play the tape head maybe dirty,  
clean the tape head.  
About Cassette tape  
• If the tape is slack tighten it.  
• If the cassette tape label is peeling off glue it  
on again.  
• Don’t use deformed cassette tape.  
• Don’t place cassette tape on the dashboard  
etc. where the temperature is high.  
Removing CDs  
When removing CDs from this unit pull them  
out horizontally.  
• CD-R and CD-RW are easier to damage than  
a normal music CD. Use a CD-R or a CD-RW  
after reading the caution items on the  
package etc.  
• Don’t stick tape etc. on the CD.  
Also, don’t use a CD with tape stuck on it.  
• Don’t use cassette tape that’s 100 minutes  
long or longer.  
CDs that can’t be used  
• CDs that aren’t round can’t be used.  
When using a new CD  
If the CD center hole or outside rim has burrs,  
use it after removing them with a ball pen etc.  
• CDs with coloring on the recording surface  
or that are dirty can’t be used.  
• Don’t use CDs without disc mark  
.
Burrs  
• A CD-R or CD-RW that hasn’t been finalized  
can’t be played. (For the finalization process  
refer to your CD-R/CD-RW writing software,  
and your CD-R/CD-RW recorder instruction  
manual.)  
Burrs  
CD storage  
• Don’t place them in direct sunlight (On the  
seat or dashboard etc.) and where the  
temperature is high.  
CD accessories  
Don’t use disc type accessories.  
• Store CDs in their cases.  
— 5 —  
 
Notes on playing MP3 (DPX-MP4030)  
This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note,  
however, that the MP3 recording media and formats acceptable  
are limited. When writing MP3, pay attention to the following  
restrictions.  
Entering ID3 tag  
The Displayable ID3 tag is ID3 version  
1.x.  
For the character code, refer to the  
List of Codes.  
Acceptable media  
The MP3 recording media acceptable to this unit are CD-ROM, CD-R,  
and CD-RW.  
Entering file and folder names  
When using CD-RW, do full format not quick format to prevent  
malfunction.  
The code list characters are the only  
file names and folder names that can  
be entered and displayed.  
If you use any other character for  
entry, the file and folder names are not displayed correctly. They may  
neither be displayed correctly depending on the CD writer used.  
The unit recognizes and plays only those MP3 which have the MP3  
extension (.MP3).  
Acceptable medium formats  
The following formats are available for the media used in this unit. The  
maximum number of characters used for file name including the  
delimiter (".") and three-character extension are indicated in  
parentheses.  
• ISO 9660 Level 1 (12 characters)  
• ISO 9660 Level 2 (31 characters)  
• Joliet (64 characters)  
• Romeo (128 characters)  
A file with a name entered with characters not on the code list  
may not play correctly.  
Up to 200 characters can be displayed in the long file name format.  
For a list of available characters, see the instruction manual of the  
writing software and the section Entering file and folder names below.  
The media reproducible on this unit has the following limitations:  
• Maximum number of directory levels: 8  
• Maximum number of files per folder: 255  
• Maximum number of characters for folder name: 64  
• Maximum number of folders: 50  
Writing files into a medium  
When a medium containing MP3 data is loaded, the unit checks all the  
data on the medium. If the medium contains a lot of folders or non-  
MP3 files, therefore, it takes a long time until the unit starts playing  
MP3.  
In addition, it may take time for the unit to move to the next MP3 file  
or a File Search or Folder Search may not be performed smoothly.  
Loading such a medium may produce loud noise to damage the speakers.  
• Do no attempt to play a medium containing a non-MP3 file with the  
MP3 extension.  
The unit mistakes non-MP3 files for MP3 data as long as they have  
the MP3 extension.  
MP3 written in the formats other than the above may not be  
successfully played and their file names or folder names are not  
properly displayed.  
Settings for your CD writer  
• Do not attempt to play a medium containing non MP3.  
When you use your CD writer to record MP3 up to the maximum disc  
capacity, disable additional writing. For recording on an empty disc up  
to the maximum capacity at once, check Disc at Once.  
— 6 —  
 
MP3 playing order  
When a File Search is executed with file ¡$ being played ...  
When selected for play, Folder Search, File Search, or for Folder  
Select, files and folders are accessed in the order in which they were  
written by the CD writer.  
Operation of the button  
¢ Button  
Current  
file number  
4 Button  
Beginning of file  
Because of this, the order in which they are expected to be played  
may not match the order in which they are actually played. You may be  
able to set the order in which MP3 are to be played by writing them  
onto a medium such as a CD-R with their file names beginning with  
play sequence numbers such as "01" to "99", depending on your CD  
writer.  
When an Folder Search is executed with file ¡$ being played ...  
Operation of the button  
Current  
folder number  
AM Button  
FM Button  
For example, a medium with the following folder/ file hierarchy is  
subject to Folder Search, File Search, or Folder Select as shown below.  
Example of a medium's folder/file hierarchy  
When Folder Select is selected with file ¡$ being played to move  
from folder to folder ...  
Operation of the button  
Current  
folder number  
4 Button  
¢ Button  
AM Button  
FM Button  
Folder  
File  
Root  
Level 1  
Level 3  
Level 2  
Level 4  
— 7 —  
 
General features  
Power  
4
¢
u / d  
DSP  
EQ/AUD  
SRC  
FM/AM  
Turning ON the Power  
Press the [SRC] button.  
Turning OFF the Power  
Press the [SRC] button for at least 1 second.  
DISC  
Selecting the Source  
DISP  
NAME  
COLOR  
S.A  
Press the [SRC] button.  
Source required  
Display  
SRC  
AUD  
PWR OFF  
B.NR  
SCRL  
MTL  
M.RDM  
FNC  
B.S  
Tuner  
"TUNER"  
SCN  
RDM  
REP  
ATT  
Tape  
"TAPE"  
CD  
"CD"  
External disc  
Standby (Illumination only mode)  
"CD-CH"/ "MD-CH"  
"ALL OFF"  
38  
DISP/NAME  
ATT  
COLOR/S.A  
#1 – 3  
Volume  
Equalizer type indicator  
Increasing Volume  
Press the [u] button.  
Decreasing Volume  
Press the [d] button.  
ATT indicator  
Source indicator  
DSP indicator  
Attenuator  
Turning the volume down quickly.  
Press the [ATT] button.  
Each time the button is pressed the Attenuator turns ON or OFF.  
— 8 —  
 
When it’s ON, the "ATT" indicator blinks.  
When operation stops for 10 seconds, the Equalizer type at that  
time is registered and the Equalizer Control mode automatically  
closes.  
Equalizer Control  
You can recall the best sound setting preset for different types of  
the music.  
Adjustment of Equalizer type at EASY  
Adjusting the effect of an Equalizer type selected in <Equalizer  
Control> when <Equalizer mode> is "EASY".  
1 Enter the Equalizer Control mode  
Press the [EQ] button.  
"EQ EASY" or "EQ PRO" is displayed.  
1 Refer to <Equalizer Control> (page 9) to select the Equalizer  
type.  
2 Select the Equalizer type  
2 Adjust the effect  
Press the [EQ] button.  
Press the [FM] or [AM] button.  
Each time the button is pressed, the effects of Equalizer switch  
as shown below:  
Each time the button is pressed, the Equalizer type switches as  
shown below:  
Equalizer type  
Display  
Setting of effect  
Display  
Rock  
Dance  
Jazz  
Pops  
Heavy  
Soft  
"Rock"  
"Dance"  
"Jazz"  
"Pops"  
"Heavy"  
"Soft"  
High  
"Hi"  
Medium  
Low  
"Mid"  
"Lo"  
Sharp  
Light  
Flat  
"Sharp"  
"Light"  
"Flat"  
• "User" display: The values set on the <Adjustment of Equalizer  
type at PRO> (page 10).  
• A selected Equalizer type can be adjusted.  
Adjustment items depend on the setting of <Equalizer mode>  
(page 24). Refer to <Adjustment of Equalizer type at EASY> (page  
9) or <Adjustment of Equalizer type at PRO> (page 10) for details  
of adjustment.  
3 Exit the Equalizer Control mode  
Press the [EQ] button for at least 1 second.  
— 9 —  
 
General features  
Adjustment of Equalizer type at PRO  
Memory preset of adjustment of Equalizer type  
Adjusting the effect of an Equalizer type selected in <Equalizer  
Control> when <Equalizer mode> is "PRO".  
The <Adjustment of Equalizer type at PRO> can be preset.  
1 Refer to <Adjustment of Equalizer type at PRO> (page 10) to  
1 Refer to <Equalizer Control> (page 9) to select the Equalizer  
adjust the Equalizer type.  
type.  
2 Preset the adjusted value  
2 Select the item for adjustment  
Press the [FM] or [AM] button.  
Each time the button is pressed, the items that can be adjusted  
Press the [#1] [#3] button for at least 2 seconds.  
Recalling a setting value  
1 Enter the Equalizer Control mode  
Press the [EQ] button.  
"EQ PRO" is displayed.  
switch as shown below.  
3 Adjust the item  
Press the [4] or [¢] button.  
If "EQ EASY" is displayed, refer to <Equalizer mode> (page 24) to  
set the mode to "EQ PRO".  
Adjustment Item  
Display  
Range  
Bass Center Frequency  
Bass level  
Bass Q Factor  
Bass Extend  
"Bas F"  
"Bas LV"  
"Bas Q"  
"EXT"  
60/70/80/100 or 150 Hz  
–12 — +12 dB  
1.00/1.25/1.50/2.00  
On/Off  
2 Recall the setting value  
Press the [#1] [#3] button.  
Middle Center Frequency "Mid F"  
0.5/1.0/1.5/2.0 kHz  
–12 — +12 dB  
1.0/2.0  
Middle level  
"Mid LV"  
"Mid Q"  
Audio Control  
Middle Q Factor  
1 Enter the Audio Control mode  
Press the [AUD] button for at least 1 second.  
"AUD mode" is displayed.  
Treble Center Frequency "Tre F"  
Treble level "Tre LV"  
10.0/12.5/15.0/17.5 kHz  
–12 — +12 dB  
• According to the Bass Q Factor setting value, the frequencies that  
can be set in Bass Center Frequency change as shown below.  
2 Select the Audio item for adjustment  
Press the [FM] or [AM] button.  
Each time the button is pressed, the items that can be adjusted  
Bass Q Factor  
1.00/1.25/1.50  
2.00  
Bass Center Frequency  
60/70/80/100  
60/70/80/150  
switch as shown below.  
• When the Bass Extend is set to ON, low frequency response is  
extended by 20%.  
3 Adjust the Audio item  
Press the [4] or [¢] button.  
— 10 —  
 
Adjustment Item  
Display  
Range  
Spectrum Analyzer Select  
Selecting the Spectrum Analyzer display.  
Balance  
Fader  
Non Fader Output  
"BAL"  
"FAD"  
"N-F"  
Left 15 — Right 15  
Rear 15 — Front 15  
On/Off  
1 Enter the Spectrum Analyzer Select mode  
Press the [S.A] button for at least 1 second.  
"SPEANA" is displayed.  
4 Exit the Audio Control mode  
Press the [AUD] button.  
2 Select the Spectrum Analyzer  
Press the [S.A] button.  
Each time the button is pressed, the Spectrum Analyzers switch  
as shown below:  
DSP System  
Setting the simulated Sound field effects of Digital Signal  
Processor.  
Spectrum Analyzer  
Display  
Scan of Spectrum Analyzer  
Spectrum Analyzer 1 — 9  
Sea Shore  
"S.A Scan"  
"SPEANA 1" — "SPEANA 9"  
"Seashore"  
1 Enter the DSP Control mode  
Press the [DSP] button.  
"DSP mode" is displayed.  
Spectrum Analyzer Off  
"S.A Off"  
Scan of Spectrum Analyzer:  
2 Select the Sound field effects  
Press the [DSP] button.  
Each time the button is pressed, the Sound field effects switch  
The display switches from Spectrum Analyzer 1 to 9  
and Sea Shore in sequence.  
3 Exit the Spectrum Analyzer Select mode  
as shown below:  
Press the [S.A] button for at least 1 second.  
When operation stops for 10 seconds, Spectrum Analyzer at that  
time is registered and the Analyzer Select mode automatically  
closes.  
Sound field effects  
Display  
Stadium  
Concert Hall  
Club  
"Stadium"  
"Concert"  
"Club"  
Church  
Studio  
Bypass  
"Church"  
"Studio"  
"Bypass"  
When operation stops for 10 seconds, the DSP Control mode  
closes.  
Turn DSP System OFF  
Press the [DSP] button for at least 1 second.  
"DSP" indicator is OFF.  
— 11 —  
 
General features  
• When operation stops for 10 seconds the name at that time is  
registered, and Name Set mode closes.  
• Memory numbers  
Station/Disc Naming (SNPS/DNPS)  
Attaching a title to a Station or CD.  
- FM & AM: 30 stations  
- Internal CD player: 10 discs  
1 Receive/play the station/disc you want to attach a title to  
• A title can't be attached to MD or MP3 media.  
• Disc Naming can't be done during clock display.  
- External CD changer/ player: Varies according to the CD changer/  
player. Refer to the CD changer/ player manual.  
• The title of station/CD can be changed by the same operation  
used to name it.  
2 Enter name set mode  
Press the [NAME] button for at least 2 seconds.  
"Name Set" is displayed.  
3 Move the cursor to the enter character position  
Press the [4] or [¢] button.  
Switching Display  
Switching the information displayed.  
4 Select the character type  
Press the [38] button.  
Press the [DISP] button.  
Each time the button is pressed the display switches as shown  
below.  
Each time the button is pressed the character type switches as  
shown below.  
Character type  
In Tuner source  
Alphabet upper case  
Alphabet lower case  
Information  
Display  
Frequency  
Station name  
Charactor  
Clock  
"SNPS"  
5 Select the characters  
Press the [FM] or [AM] button.  
Characters can be entered by using a remote with a number  
buttons.  
Example: If "DANCE" is entered.  
In CD & External disc source  
Information  
Display  
Character  
Button  
#Times pressed  
Track number & Track time  
Track number & Disc play time  
Disc name  
Disc title (In External disc source or  
DPX-MP4030 internal CD source)  
Track title (In External disc source or  
DPX-MP4030 internal CD source)  
Charactor  
Clock  
"P-Time"  
"A-Time"  
"DNPS"  
"D-Title"  
"D"  
"A"  
"N"  
"C"  
"E"  
[#3]  
[#2]  
[#6]  
[#2]  
[#3]  
1
1
2
3
2
"T-Title"  
6 Repeat steps 3 through 5 and enter the name.  
7 Exit name set mode  
Press the [NAME] button.  
— 12 —  
 
In MP3 source (DPX-MP4030)  
Illumination Color Select  
Setting the color of the display.  
Information  
Display  
Track Time  
Folder name  
File name  
"P-Time"  
"Folder"  
"File"  
1 Enter the Illumination Color Select mode  
Press the [COLOR] button.  
Song title & Artist name  
Album name  
Charactor  
"Title"  
"Album"  
"Illumi" is displayed.  
2 Select the Illumination Color  
Press the [COLOR] button.  
Each time the button is pressed, the Illumination Color switches  
Clock  
In Tape source  
as shown below:  
Information  
Illumination Color  
Display  
Play side & Tape counter  
Charactor  
Clock  
Scan of "Blue" to "Mint"  
Blue  
Mars Red  
White  
"V.Color"  
"Blue"  
"Mars Red"  
"White"  
In ALL OFF Mode  
Information  
Lavender  
Muscat  
Pink  
Sky Blue  
Lime  
"Lavender"  
"Muscat"  
"Pink"  
"Sky Blue"  
"Lime"  
Charactor & Graphic  
Clock & Graphic  
Clock  
Violet  
"Violet"  
Aqua  
"Aqua"  
Orange  
Mint  
"Orange"  
"Mint"  
User Color  
"R-X/G-X/B-X"  
"User Color" enables the color set in <User Illumination Color  
Setting> (page 14) to be recalled.  
3 Exit the Illumination Color Select mode  
Press the [COLOR] button for at least 1 second.  
When operation stops for 10 seconds, the Illumination Color at  
that time is registered and the Illumination Color Select mode  
automatically closes.  
— 13 —  
 
General features  
User Illumination Color Setting  
Adjusting Clock  
The Illumination Color by the adjustment of RGB can arbitrarily  
set.  
1 Select the clock display  
Press the [DISP] button.  
1 Enter the Illumination Color Select mode  
Press the [COLOR] button.  
"Illumi" is displayed.  
2 Enter clock adjustment mode  
Press the [DISP] button for at least 1 second.  
The indicator blinks.  
2 Select the Color for adjustment  
Press the [4] or [¢] button.  
3 Adjust the hours  
Press the [FM] or [AM] button.  
Each time the button is pressed, the colors that can be adjusted  
switch as shown below:  
Adjust the minutes  
Press the [4] or [¢] button.  
Adjustment Color  
Display  
4 Exit clock adjustment mode  
Red  
Green  
Blue  
"R" is blinks  
"G" is blinks  
"B" is blinks  
Press the [DISP] button.  
3 Adjust the Color  
Press the [FM] or [AM] button.  
Each time the button is pressed, the intensity of color changes  
as shown below:  
Intensity of color  
Display  
Turning off  
Weak  
"X-0"  
"X-1"  
Dark  
"X-4"  
4 Exit the Illumination Color Select mode  
Press the [COLOR] button for at least 1 second.  
When operation stops for 10 seconds, the Illumination Color at  
that time is determined and the Illumination Color Select mode  
automatically closes.  
— 14 —  
 
Tuner features  
Tuning  
4
¢
SRC  
FM/AM  
Selecting the station.  
1 Select tuner source  
Press the [SRC] button.  
Select the "TUNER" display.  
2 Select the band  
DISC  
Press the [FM] or [AM] button.  
Each time the [FM] button is pressed it switches between the  
FM1, FM2, and FM3 bands.  
DISP  
NAME  
COLOR  
S.A  
3 Tune up or down band  
SRC  
AUD  
SCN  
PWR OFF  
Press the [4] or [¢] button.  
B.NR  
SCRL  
MTL  
M.RDM  
FNC  
B.S  
RDM  
REP  
ATT  
During reception of stereo stations the "ST" indicator is ON.  
#1 – 6  
FNC  
Direct Access Tuning (Function of remote)  
Entering the frequency and tuning.  
1 Select the band  
Band display  
Frequency display Preset station number  
Press the [FM] or [AM] button.  
2 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote.  
"– – – –" is displayed.  
3 Enter the frequency  
Press the number buttons on the remote.  
Example:  
Desired frequency  
Press button  
ST indicator  
92.1 MHz (FM)  
810 kHz (AM)  
[#0], [#9], [#2], [#1]  
[#0], [#8], [#1], [#0]  
Canceling Direct Access Tuning  
Press the [DIRECT] button on the remote.  
— 15 —  
 
Tuner features  
Station Preset Memory  
Preset Tuning  
Putting the station in the memory.  
Calling up the stations in the memory.  
1 Select the band  
1 Select the band  
Press the [FM] or [AM] button.  
Press the [FM] or [AM] button.  
2 Select the frequency to put in the memory  
2 Call up the station  
Press the [4] or [¢] button.  
Press the [#1] [#6] button.  
3 Put the frequency in the memory  
Press the [#1] — [#6] button for at least 2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 station can be put in the memory on each [#1]  
— [#6] button.  
Frequency Step Setting  
Changing the tuning frequency step.  
The original setting is FM band 50 kHz, and AM band 9 kHz.  
1 Turn the power OFF  
Press the [SRC] button for at least 1 second.  
Auto Memory Entry  
Putting a station with good reception in the memory  
automatically.  
2 Switch the frequency step  
While pressing the [#1] and [#5] button, press the [SRC]  
button.  
1 Select the band for Auto Memory Entry  
The frequency step changes to FM band 200 kHz, and AM band  
10 kHz.  
Press the [FM] or [AM] button.  
• When the same operation is repeated, it returns to the original  
setting.  
• When the frequency step is switched, the frequencies in the  
memory are deleted.  
2 Enter Function mode  
Press the [FNC] button for at least 1 second.  
"Function" is displayed.  
3 Select the Auto Memory Entry mode  
Press the [FM] or [AM] button.  
Select the "A-Memory" display.  
4 Open Auto Memory Entry  
Press the [4] or [¢] button for at least 2 seconds.  
When 6 stations that can be received are put in the memory  
Auto Memory Entry closes.  
— 16 —  
 
Cassette player features  
Playing Cassette Tapes  
4
¢
SRC  
0
FM/AM  
When the Cassette Tape is inserted  
Press the [SRC] button.  
Select the "TAPE" display.  
When there's a Cassette Tape inserted, the  
indicator is ON.  
When you want to listen to the reverse side  
DISC  
Press the [38] button.  
Eject the Cassette Tape  
DISP  
NAME  
COLOR  
S.A  
Press the [0] button.  
SRC  
AUD  
SCN  
PWR OFF  
B.NR  
SCRL  
MTL  
FNC  
B.S  
M.RDM  
RDM  
REP  
ATT  
Fast Forwarding and Rewinding  
38  
B.NR SCN  
B.S  
REP  
MTL  
Fast Forwarding  
Press the [FM] button.  
When it's stopped press the [38] button.  
Rewinding  
Press the [AM] button.  
When it's stopped press the [38] button.  
Dolby B NR  
indicator  
indicator  
Tape counter display  
Scan indicator  
Dolby B NR  
Press the [B.NR] button.  
Each time the button is pressed the Dolby B NR turns ON or  
OFF.  
When it's ON, "B NR On" is displayed.  
Repeat indicator  
Blank Skip indicator  
MTL indicator  
— 17 —  
 
Cassette player features  
1 Designate the song to skip  
Selecting the Tape type  
Press the [MTL] button.  
Press number buttons on the remote.  
2 Skipping to a later song  
Each time the button is pressed the Tape type switches as  
shown below.  
Press the [¢] button.  
"MTL" indicator  
Tape type  
Skipping to a previous song  
ON  
CrO2 (Type II), FeCr (Type III),  
Metal (Type IV)  
Normal (Type I)  
Press the [4] button.  
Canceling DPSS  
OFF  
Press the [38] button.  
• During the songs first 5 seconds there may be a times when the  
previous track is recognized as the current track.  
• As many as 9 songs can be skipped.  
DPSS (Direct Program Search System)  
Indicating the songs to skip, and Fast Forwarding or Rewinding.  
Skipping to a later song  
Press the [¢] button.  
Blank Skip  
Fast forwarding automatically when an unrecorded portion  
continues for at least 10 seconds.  
Each time the button is pressed the number of songs skipped  
increases.  
Press the [B.S] button.  
Each time the button is pressed the Blank Skip turns ON or OFF.  
When it's ON, "B.S On" is displayed.  
Skipping to a previous song  
Press the [4] button.  
Each time the button is pressed the number of songs skipped  
increases.  
Canceling DPSS  
Press the [38] button.  
Index Scan  
• During the songs first 5 seconds there may be a times when the  
previous song is recognized as the current song.  
• As many as 9 songs can be skipped.  
Playing the first part of each song on the tape you are listening  
to and searching for the song you want to listen to.  
1 Start Index Scan  
Press the [SCN] button.  
"IDX Scan" is displayed.  
DPSS with the Remote  
Designating the song to be skipped with the remote control  
number buttons.  
2 Release it when the song you want to listen to is played  
Press the [SCN] button.  
— 18 —  
 
CD/MP3/External disc control features  
Music Repeat  
4
¢
SRC  
0
Repeating the present song.  
Press the [REP] button.  
Each time the button is pressed the Music Repeat turns ON or  
OFF.  
When it's ON, "Repeat" is displayed.  
DISC  
DISP  
NAME  
COLOR  
S.A  
SRC  
AUD  
SCN  
PWR OFF  
B.NR  
SCRL  
MTL  
FNC  
B.S  
M.RDM  
RDM  
REP  
ATT  
38  
DISC–/DISC+  
SCRL SCN RDM/#3 REP  
#5  
M.RDM  
Random indicator  
indicator  
Track number  
Track time  
Disc number  
MP3 indicator  
Scan indicator  
Repeat indicator  
— 19 —  
 
CD/MP3/External disc control features  
Display  
Disc player  
Playing CD & MP3  
"CD-CH"  
"MD-CH"  
CD changer  
MD changer  
When there is no disc inserted  
Insert a disc.  
Pause and play  
• The models that can play MP3 is shown below.  
DPX-MP4030  
During MP3 is playing, the "MP3" indicator is ON.  
Press the [38] button.  
Each time the button is pressed it pauses and plays.  
• When a disc is inserted, the  
indicator is ON.  
• Disc #10 is displayed as "0".  
• The functions that can be used and the information that can be  
displayed will differ depending on the external disc players being  
connected.  
When a disc is inserted  
Press the [SRC] button.  
Select the "CD" display.  
Pause and play  
Press the [38] button.  
Each time the button is pressed it pauses and plays.  
Fast Forwarding and Reversing  
Eject the disc  
Fast Forwarding  
Press the [0] button.  
Hold down on the [¢] button.  
Release your finger to play the disc at that point.  
3 in. (8cm) CD cannot be played. Using an adapter and inserting  
them into this unit can cause damage.  
Reversing  
The MP3 media that this unit can play are CD-ROM, CD-R, and CD-  
RW.  
The medium formats must be ISO 9660 Level 1, Level 2, Joliet, or  
Romeo. The methods and precautions to be followed for writing  
MP3 data are covered in <Notes on playing MP3> (page 6).  
Check that section before creating your MP3 media.  
Hold down on the [4] button.  
Release your finger to play the disc at that point.  
Track/ File Search  
Selecting the song you want to hear.  
Searching for a song on the disc or in the MP3 folder.  
Playing External Disc  
Press the [4] or [¢] button.  
Playing discs set in the optional accessory disc player connected  
to this unit.  
Press the [SRC] button.  
Select the display for the disc player you want.  
Display examples:  
Disc Search (Function of disc changer)  
Selecting the disc you want to hear.  
Press the [DISC–] or [DISC+] button.  
— 20 —  
 
Folder Search (Function of MP3)  
Selecting the folder recorded on the MP3 media.  
Press the [DISC–] or [DISC+] button.  
Track/ Disc/ Folder/ File Repeat  
Replaying the song, disc in the Disc changer or MP3 folder  
you're listening to.  
Press the [REP] button.  
Each time the button is pressed the Repeat Play switches as  
When a disc is being played in an MP3-compatible Disc  
Changer, pause the play.  
shown below.  
During CD/MD play  
Repeat play  
Display  
Direct Track Search (Function of remote)  
Doing Track Search by entering the track number.  
Track Repeat  
Disc Repeat (Function of disc changer)  
OFF  
"Repeat"  
"D-Repeat"  
1 Enter the track number  
During MP3 play  
Press the number buttons on the remote.  
Repeat play  
Display  
2 Do Track Search  
File Repeat  
Folder Repeat  
OFF  
"File REP"  
"Fold. REP"  
Press the [4] or [¢] button.  
Canceling Direct Track Search  
Press the [38] button.  
Track Scan  
Direct Disc Search  
Playing the first part of each song on the disc or MP3 folder you  
are listening to and searching for the song you want to listen to.  
(Function of disc changers with remote)  
Doing Disc Search by entering the disc number.  
1 Start Track Scan  
Press the [SCN] button.  
"Scan" is displayed.  
1 Enter the disc number  
Press the number buttons on the remote.  
2 Do Disc Search  
2 Release it when the song you want to listen to is played  
Press the [DISC+] or [DISC–] button.  
Press the [SCN] button.  
Canceling Direct Disc Search  
Press the [38] button.  
Input "0" to select disc 10.  
— 21 —  
 
CD/MP3/External disc control features  
Random Play  
Play all the songs on the disc or MP3 folder in random order.  
Press the [RDM] button.  
Each time the button is pressed Random Play turns ON or OFF.  
When it's ON, "Random" is displayed.  
<Folder name display>  
Displays the current folder name.  
When the [¢] button is pressed, the next song select starts.  
2 Select the folder level  
Press the [FM] or [AM] button.  
With the [FM] button you move 1 level down and with the [AM]  
button 1 level up.  
Magazine Random Play  
Selecting a folder in the same level  
Press the [4] or [¢] button.  
With the [4] button you move to the previous folder, and with  
the [¢] button to the next folder.  
(Function of disc changer)  
Play the songs on all the discs in the disc changer in random  
order.  
Press the [M.RDM] button.  
Each time the button is pressed the Magazine Random Play turns  
ON or OFF.  
Returning to the top level  
Press the [#3] button.  
When it's ON, "M-Random" is displayed.  
3 Decide the folder to play  
Press the [38] button.  
When the [¢] button is pressed, the next song select starts.  
The Folder Select mode releases, and the MP3 in the folder  
being displayed is played.  
The methods for moving to other folders in the folder select mode  
are different from those in the folder search mode.  
See <Notes on playing MP3> (page 6) for details.  
Function of the DPX-MP4030  
Folder Select (Function of MP3)  
Quickly selecting the folder you want to listen to.  
Canceling the Folder Select mode  
Press the [#5] button.  
1 Enter Folder Select mode  
Press the [#5] button.  
"F.Select" is displayed.  
During Select mode the folder information is displayed as shown  
below.  
Text/Title Scroll  
Scrolling the displayed CD text, MP3 text, or MD title.  
Press the [SCRL] button.  
— 22 —  
 
Function Set  
Function Set  
4
¢
FM/AM  
Setting during operation beep sound etc. functions.  
The Function Set basic operation method is explained here. The  
reference for the Function items and their setting content is after  
this operation explanation.  
1 Enter Function Set mode  
Press the [FNC] button for at least 1 second.  
"Function" is displayed.  
DISC  
2 Select the Function Set item  
Press the [FM] or [AM] button.  
Example: When you want to set the beep sound select the  
"BEEP" display.  
DISP  
NAME  
COLOR  
S.A  
SRC  
AUD  
SCN  
PWR OFF  
B.NR  
SCRL  
MTL  
M.RDM  
FNC  
B.S  
RDM  
REP  
ATT  
3 Set the Function Set item  
Press the [4] or [¢] button.  
Example: When "BEEP" is selected, each time the button is  
pressed it switches "BEEP On" or "BEEP Off". Select 1  
of them as the setting.  
FNC  
S.A  
#1 – 4  
You can continue by returning to step 2 and setting other items.  
4 Exit Function Set mode  
Press the [FNC] button.  
Monaural indicator  
When other items that are applicable to the basic operation method  
above are displayed afterwards their setting content chart is  
entered. (Normally the uppermost setting in the chart is the original  
setting.)  
Also, the explanation for items that aren't applicable are entered  
step by step.  
AUTO indicator  
Function display  
— 23 —  
 
Function Set  
<In ALL OFF Mode>  
Switching preout  
Switching the preout between the rear and non-fading. (In non-  
fading it outputs without effect from the fader control.)  
Illumination Color Mode  
Setting the Illumination Color Mode of your display.  
Display  
Setting  
Display  
Setting  
"Pout R"  
Rear preout.  
"COL Sync" The color of your display changes from one color to  
another during volume adjustment and during  
Attenuator being ON.  
"Pout N-F"  
Non-fading preout.  
"COL Fix"  
Fix the color set.  
Opening Demonstration  
Setting the Demonstration when Power is turned ON.  
Contrast Adjustment  
Display  
Setting  
Adjusting the display contrast.  
"Open On"  
Demonstration is carried out when Power is  
turned ON.  
Demonstration is not carried out when Power is  
turned ON.  
Display and Setting  
"Open Off"  
"CONT 1"  
"CONT 7" (Original setting)  
"CONT 11"  
Equalizer mode  
Setting the method of adjusting Equalizer types.  
1 Select Equalizer mode  
Press the [FM] or [AM] button.  
Select the "EQ" display.  
Touch Sensor Tone  
Setting the operation check sound (beep sound) ON/OFF.  
2 Select the method of adjusting Equalizer types  
Press the [4] or [¢] button for at least 1 second.  
Each time the button is pressed for at least 1 second, method of  
adjusting Equalizer type switches as shown below:  
Display  
Setting  
"BEEP On"  
"BEEP Off"  
Beep is heard.  
Beep canceled.  
— 24 —  
 
Display  
Setting  
5 Do the step 3 and 4 step operation, and reenter the security  
code.  
"EQ EASY"  
The effects of Equalizer type can be adjusted  
among 3 levels.  
The Security Code function activates.  
"EQ PRO"  
Equalizer types can be adjusted by Bass, Middle,  
and Treble.  
When a Code different from step 3 is entered, repeat from step 3.  
Press the Reset button and when it's removed from the  
battery power source  
1 Turn the power ON.  
Security Code  
2 Do the step 3 and 4 operation, and enter the Security Code.  
Because authorization by the Security Code is required when it's  
removed from the vehicle, personalizing this unit is by using the  
Security Code is a help in preventing theft.  
"CODE OK!" is displayed.  
The unit can be used.  
When the Security Code function is activated, the code can't be  
changed and the function can't be released.  
Note, the Security Code can be set as the 4 digit number of your  
choice.  
<In Tuner mode>  
Tuning Mode  
Sets the tuning mode.  
1 Select the Security Code mode  
Press the [FM] or [AM] button.  
Select the "Security" display.  
Tuning mode  
Display Operation  
2 Enter the Security Code mode  
Press the [S.A] button for at least 2 seconds.  
"WRITE!" is displayed.  
Auto seek  
"Auto 1" Automatic search for a station.  
Preset station seek "Auto 2" Search in order of the stations in  
the Preset memory.  
Manual  
"Manual" Normal manual tuning control.  
3 Enter the Security Code  
Press the [#1] — [#4] button.  
Example: If the Security Code is "3510".  
Step Button  
#Times pressed  
Display  
Monaural Reception <In FM reception>  
Noise can be reduced when stereo broadcasts are received as  
monaural.  
1
2
3
4
[#1]  
[#2]  
[#3]  
[#4]  
4
6
2
1
"3"  
"5"  
"1"  
"0"  
Display  
Setting  
4 Confirm the Security Code  
"MONO Off"  
"MONO On"  
The monaural reception is OFF.  
The monaural reception is ON.  
Press the [S.A] button.  
When "WRITE!" is displayed, "RE-ENTER" is displayed.  
— 25 —  
 
Basic Operations of remote  
Function Set  
Accessory of the DPX-MP4030/ DPX-3030S  
Auto Memory Entry  
For the operation method refer to <Auto Memory Entry> (page  
16).  
<In CD/MP3/External disc control mode>  
4/¢  
Text Scroll  
Setting the displayed text scroll.  
FM/AM/DISC+/DISC–  
Display  
Setting  
38  
"SCL Auto"  
"SCL Manu"  
Repeats scroll.  
Scrolls when the display changes.  
The text scrolled is shown below.  
• CD text  
[#0] — [#9]  
• Folder name/ File name/ Song title/ Artist name/ Album name  
• MD title  
DIRECT/OK  
DNPP  
ATT  
VOL.  
SRC  
— 26 —  
 
Loading and Replacing the battery  
In Tuner source  
Use one lithium battery (CR2025).  
Insert the batteries with the + and – poles aligned properly,  
following the illustration inside the case.  
[FM]/ [AM] buttons  
Select the band.  
Each time the [FM] button is pressed it switches between the  
FM1, FM2, and FM3 bands.  
[4]/ [¢] buttons  
Tune up or down band.  
[#0] — [#9] buttons  
Press buttons [#1] — [#6] to recall preset stations.  
[DIRECT] button  
Enters and cancels the <Direct Access Tuning> (page 15) mode.  
2WARNING  
Store unused batteries out of the reach of children. Contact a doctor  
immediately if the battery is accidentally swallowed.  
Do not set the remote on hot places such as above the dashboard.  
In Cassette tape source  
[4]/ [¢] buttons  
Do <DPSS (Direct Program Search System)> (page 18).  
[38] button  
Basic operations  
Plays the reverse side of the tape.  
[VOL.] buttons  
Adjusting the volume.  
[FM] button  
Fast forwards the tape.  
When the [38] button is pressed it releases.  
[SRC] button  
Each time the button is pressed the source switches.  
For the source switching order refer to <Selecting the Source>  
(page 8).  
[AM] button  
Rewinds the tape.  
When the [38] button is pressed it can be released.  
[ATT] button  
Turning the volume down quickly.  
When it is pressed again it returns to the previous level.  
[#0] — [#9] buttons  
When in <DPSS with the Remote> (page 18) enter the number  
of songs.  
— 27 —  
 
Basic Operations of remote  
Accessory of the DPX-MP4030/ DPX-3030S  
In Disc source  
[4]/ [¢] buttons  
Doing track/ file forward and backward.  
[DISC+]/ [DISC–] buttons  
Doing disc/ folder forward and backward.  
[38] button  
Each time the button is pressed the song pauses and plays.  
[#0] — [#9] buttons  
When in <Direct Track Search> (page 21) and <Direct Disc  
Search> (page 21), enter the track/disc number.  
— 28 —  
 
Accessories  
External view  
External view  
......... Number of items  
2WARNING  
......... Number of items  
If you connect the ignition wire (red) and the battery wire (yellow)  
to the car chassis (ground), you may cause a short circuit, that in  
turn may start a fire. Always connect those wires to the power  
source running through the fuse box.  
(M5×6mm)  
1
2
3
4
.........6  
.........1  
2CAUTION  
• If your car's ignition does not have an ACC position, connect the  
ignition wires to a power source that can be turned on and off  
with the ignition key. If you connect the ignition wire to a power  
source with a constant voltage supply, as with battery wires, the  
battery may die.  
• If the fuse blows, first make sure the wires aren’t touching to  
cause a short circuit, then replace the old fuse with one with the  
same rating.  
(M5×7mm)  
.........1  
.........6  
The use of any accessories except for those provided might result in  
damage to the unit. Make sure only to use the accessories shipped with  
the unit, as shown above.  
• Insulate unconnected wires with vinyl tape or other similar  
material. To prevent a short circuit, do not remove the caps on  
the ends of the unconnected wires or the terminals.  
• Connect the speaker wires correctly to the terminals to which  
they correspond. The unit may be damaged or fail to work if you  
share the - wires or ground them to any metal part in the car.  
• When only two speakers are being connected to the system,  
connect the connectors either to both the front output terminals  
or to both the rear output terminals (do not mix front and rear).  
For example, if you connect the + connector of the left speaker  
to a front output terminal, do not connect the - connector to a  
rear output terminal  
Installation Procedure  
1. To prevent a short circuit, remove the key from the ignition and  
disconnect the - battery.  
2. Make the proper input and output wire connections for each unit.  
3. Connect the speaker wires of the wiring harness.  
• After the unit is installed, check whether the brake lamps,  
blinkers, wipers, etc. on the car are working properly.  
• Mount the unit so that the mounting angle is 30° or less.  
4. Connect the wiring harness wires in the following order: ground,  
battery, ignition.  
5. Connect the wiring harness connector to the unit.  
6. Install the unit in your car.  
7. Reconnect the - battery.  
8. Press the reset button.  
— 29 —  
 
Connecting Wires to Terminals  
Front left output (White)  
Front right output (Red)  
Fuse (10A)  
Rear left output (White)/  
Non-fading left output (White)  
FM/AM antenna input  
Rear right output (Red)/  
Non-fading right output (Red)  
KENWOOD disc changer control input  
NOTE  
Dimmer control wire  
(Orange/White)  
Wiring harness  
(Accessory2)  
To connect the Disc changer,  
consult your Disc changer manual.  
To car light control switch  
ILLUMI  
White/Black–  
To front left  
speaker  
Power control wire  
(Blue/White)  
P.CONT  
FRONT•L  
+
When using the optional power amplifier,  
connect to its power control terminal.  
White  
Gray/Black–  
Depending on what antenna you are using,  
connect either to the control terminal of the  
motor antenna, or to the power terminal for  
the booster amplifier of the film-type antenna.  
To front right  
speaker  
Motor antenna control wire  
(Blue)  
FRONT•R  
Gray+  
ANT  
CONT  
Green/Black–  
Ignition key  
To rear left  
speaker  
REAR•L  
+
switch  
Ignition wire (Red)  
ACC  
Green  
ACC  
Purple/Black–  
Battery wire (Yellow)  
To rear right  
speaker  
Car fuse box  
(Main fuse)  
REAR•R  
+
BATT  
Purple  
Car fuse box  
Ground wire (Black) - (To car chassis)  
Battery  
+
— 30 —  
 
Installation  
2CAUTION  
When performing a check of the CD operation prior to installation,  
place this unit in a horizontal position and perform a loading/eject  
of the CD.  
Installation  
Install onto the car bracket using the supplied screws (M5 × 6  
mm, M5 × 7 mm). The holes of the car bracket to use will differ  
depending on the car model.  
Screw (M4X8)  
(commercially  
available)  
When a ground wire is  
included in the wiring kit  
(which is sold separately),  
fasten the ground wire  
with the binding screw  
located on the rear panel  
of this unit.  
Accessory1  
(M5 × 6 mm)  
or Accessory4  
(M5 × 7 mm)  
Accessory3  
(Only for NISSAN car)  
— 31 —  
 
Troubleshooting Guide  
The cassette tape is bad.23  
Try playing another cassette tape. If works fine, the first tape was  
What might seem to be a malfunction in your unit may  
just be the result of slight misoperation or miswiring.  
Before calling service, first check the following table  
for possible problems.  
bad.  
? The sound quality is poor or distorted.25  
One of the speaker wires is being pinched by a screw in the car.  
Check the speaker wiring.  
General  
The tape head is dirty.26  
Clean the tape head.  
? The power does not turn ON.01  
The fuse has blown.  
The speakers are not wired correctly.27  
Reconnect the speaker wires so that each output terminal is  
connected to a different speaker.  
After checking for short circuits in the wires, replace the fuse with  
one with the same rating.  
No ACC position on vehicle ignition.02  
Connect the same wire to the ignition as the battery wire.  
? Non-fading setting can’t be done.28  
The <Switching preout> (page 24) is set on Rear preout.  
? Nothing happens when the buttons are pressed.04  
Set it on Non-fading preout.  
The computer chip in the unit is not functioning normally.  
Press the reset button on the unit (page 4).  
? The text is not scrolled.31  
This is because eight or less characters are displayed.  
If all the characters are displayable on the display part, the text is  
scrolled once when the display switches, and after that, the text  
is not scrolled.  
? There’s a source you can’t switch.05  
There’s no tape inserted.  
Set the media you want to listen to. If there’s no media in this  
unit, you can't switch to each source.  
? The Security Code item isn’t displayed in the Function System.32  
There’s no CD inserted.  
Set the media you want to listen to. If there’s no media in this  
unit, you can't switch to each source.  
The Security Code function is already activated.  
When the Security Code function is activated it isn’t displayed in  
the Function items.  
The Disc changer isn’t connected.08  
Connect the Disc changer. If the Disc changer isn’t connected to  
it's input terminal, You can't switch to an external disc source.  
? The Touch Sensor Tone doesn’t sound.34  
The preout jack is being used.  
The Touch Sensor Tone can’t be output from the preout jack.  
? The memory is erased when the ignition is turned OFF.10  
The battery wire has not been connected to the proper terminal.  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
? Even though the vehicle light switch is turned ON, the unit’s display  
won’t dim.36  
The dimmer wire isn’t connected.  
Connect the dimmer wire correctly.  
The ignition and battery wire are incorrectly connected.11  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
? The display color changes subtly. 38-2  
This is because the temperature is different than the temperature  
when the setting was done.  
? No sound can be heard, or the volume is low.  
The display color condition changes subtly according.to the  
ambient temperature.  
The fader or balance settings are set all the way to one side.21  
Center the fader and balance settings.  
The input/output wires or wiring harness are connected incorrectly.22  
Reconnect the input/output wires or the wiring harness correctly.  
See the section on <Connecting Wires to Terminals>.  
— 32 —  
 
Tuner source  
Disc source  
? Radio reception is poor.39  
? "AUX" is displayed without achieving External disc control mode.50  
The car antenna is not extended.  
O-N switch is set to "O" side.  
Pull the antenna out all the way.  
Set the switch to "N" side.  
The antenna control wire is not connected.40  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
Unsupported disc changer is connected.51  
Connect the supported disc changer. (page 3)  
? The specified disc does not play, but another one plays instead.52  
? The desired frequency can’t be entered with the Direct Access  
The specified CD is quite dirty.  
Clean the CD.  
Tuning.41  
A station that can’t be received is being entered.  
The CD is upside-down.53  
Load the CD with the labeled side up.  
Enter a station that can be received.  
You’re trying to enter a frequency with a 0.01 MHz unit.42  
What can be designated in the FM band is to 0.1 MHz.  
The disc is loaded in a different slot from that specified.54  
Eject the disc magazine and check the number for the specified  
disc.  
Cassette tape source  
The disc is severely scratched.55  
Try another disc instead.  
? Can’t remove tape.44  
The cause is that more than 10 minutes has elapsed since the vehicle  
ACC switch was turned OFF.  
? The specified track will not play.58  
Random play or magazine random play has been selected.  
The tape can only be removed within 10 minutes of the ACC  
switch being turned OFF. If more than 10 minutes has elapsed,  
turn the ACC switch ON again and press the Eject button.  
Turn off random play or magazine random play.  
? Track repeat, disc repeat, track scan, random play, and magazine  
random play start by themselves.59  
? The DPSS, Tape Advance and Music Repeat don’t operate  
The setting is not canceled.  
correctly.45  
The settings for these functions remain on until the setting to off  
or the disc ejected, even if the power is turned off or the source  
changed.  
The space between the songs on the tape can’t be recognized  
because it’s too short.  
Have at least 4 seconds between songs.  
? Cannot play CD-R or CD-RW.60  
The space between songs can’t be recognized because there’s too  
much noise between songs.46  
Reduce the noise between songs.  
Finalization processing is not being conducted for CD-R/CD-RW.  
Conduct finalization processing with CD recorder.  
A non-compatible CD changer is being used to play the CD-R/CD-  
RW.61  
Use a CD changer compatible with CD-R/CD-RW to play.  
? The blank skip doesn’t work.47  
Because noise is too loud, the non-recorded part can’t be recognized.  
Reduce the noise between songs.  
? A CD ejects as soon as it is loaded.62  
? Blank Skip functions at places that are recorded.48  
The CD is upside-down.  
Because the recording level is low, it’s recognized as not recorded.  
Load the CD with the labeled side up.  
Turn Blank Skip OFF.  
The CD is quite dirty.63  
Clean the CD, referring to the section on <CD cleaning> (page 5).  
— 33 —  
 
Troubleshooting Guide  
MP3 source  
? Can’t remove disc.64  
The cause is that more than 10 minutes has elapsed since the vehicle  
ACC switch was turned OFF.  
? Cannot play an MP3.67  
Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.  
Use a medium conforming to ISO 9660 Level 1/2, Joliet, and  
Romeo.  
The disc can only be removed within 10 minutes of the ACC  
switch being turned OFF. If more than 10 minutes has elapsed,  
turn the ACC switch ON again and press the Eject button.  
The MP3 has no or invalid file name extension.68  
Add the ".MP3" extension to the MP3 file name.  
? The disc won’t insert.65  
There’s already another disc inserted.  
The media is scratched or dirty.69  
Clean the media, referring to the section on <CD cleaning> (page  
Press the [0] button and remove the disc.  
5).  
? Direct Track Search and Direct Disc Search can’t be done.66-1  
Another function is ON.  
? Noise or no sound generated when an MP3 is played.70  
Turn Random Play or other functions OFF.  
The file has the MP3 file name extension while it is not an MP3.  
Do not use the ".MP3" extension in non-MP3.  
? Track Search can't be done.66-2  
For the discs first or last song.  
? Takes time before the unit starts playing MP3.71  
For each disc, Track Search can't be done in the backward  
direction for the first song or in the forward direction for the last  
song.  
The medium contains many folders, files, and hierarchical levels.  
The unit checks all files on the loaded medium first. If the medium  
has many files recorded, it may take a long time for the unit  
before it starts playing MP3.  
? Fails to play MP3 in the intended order.72  
The MP3 files were not written by the CD writer in the order in which  
you wanted them to be played.  
Depending on the CD writer, you may be able to set the order in  
which MP3 files are to be played by writing them onto a medium  
with their file names beginning with play sequence numbers such  
as "01" to "99".  
? The sound skips when an MP3 is being played.73-1  
The media is scratched or dirty.  
Clean the media, referring to the section on <CD cleaning> (page  
5).  
The recording condition is bad.73-2  
Record the media again or use another media.  
? Can't display the ID3 tag information correctly.75  
Record is not made in conformity with the ID 3 tag version1.x.  
Record in conformity with the ID 3 tag version1.x.  
— 34 —  
 
The messages shown below display your systems  
condition.  
? The songs in the selected folder aren’t played in Folder Select  
mode.77  
There are no MP3 in the selected folder.  
EJECT:  
No disc magazine has been loaded in the changer.  
The disc magazine is not completely loaded.E01  
Load the disc magazine properly.  
No CD in the unit.  
Make sure there’s recorded content in the MP3 media.  
? The MP3 File/Folder search takes time.78  
Many files are recorded on the media.  
When the media directory is complex, the file/folder search can  
take time.  
Insert the CD.  
No Disc:  
Error 04:  
No disc has been loaded in the disc magazine.E02  
Load a disc into the disc magazine.  
? The MP3 related text isn’t displayed correctly.79  
A character is entered that this unit can't display.  
For the characters that can be used for MP3 text entry, refer to  
<Notes on playing MP3> (page 6).  
No disc has been loaded in the disc magazine.E04  
Load a disc into the disc magazine.  
The CD is quite dirty. The CD is upside-down. The CD  
is scratched a lot.  
? The MP3 file time isn’t displayed correctly.80  
---  
There are times when it isn’t displayed correctly according to the  
Clean the CD and load it correctly.  
MP3 recording conditions.  
Error 05:  
The CD is upside-down.E05  
Load the CD correctly.  
? The songs in the selected folder aren’t played in Folder Select  
mode.102  
There are no MP3 in the selected folder.  
Blank:  
Nothing has been recorded on the MD.E10  
Make sure there’s recorded content in the MP3 media.  
No Track:  
No tracks are recorded on the MD, although it has a  
title.E11  
If the following situations, consult your nearest service  
center:  
• Even though the disc changer is connected, the Disc Changer source is  
not ON, with "AUX" showing in the display during the Changer Mode.  
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,  
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the  
Auxiliary input is entered when switching modes.  
No Music:  
Media was played that doesn’t have data recorded  
that the unit can play. E15  
Use media that has data recorded that the unit can  
play.  
Error 30:  
Error 77:  
The faceplate of the slave unit being connected to  
this unit has been removed.E30  
Replace it.  
The unit is malfunctioning for some reason.E77  
Press the reset button on the unit. If the "Error 77"  
code does not disappear, consult your nearest  
service center.  
— 35 —  
 
Troubleshooting Guide  
Error 99:  
Something is wrong with the disc magazine. Or the  
unit is malfunctioning for some reason.E99  
Check the disc magazine. And then press the reset  
button on the unit. If the "Error 99" code does not  
disappear, consult your nearest service center.  
(Blink):  
(Blink):  
The CD player section is not operating properly.E59  
Reinsert the CD. If the CD cannot be ejected or the  
display continues to flash even when the CD has  
been properly reinserted, please switch off the  
power and consult your nearest service center.  
Hold:  
The protective circuit in the unit activates when the  
temperature inside the automatic disc changer  
exceeds 60°C (140°F), stopping all operation.E0d  
Cool down the unit by opening the windows or  
turning on the air conditioner. As the temperature  
falls below 60°C (140°F), the disc will start playing  
again.  
The tape player section is not operating properly.E60  
Reinsert the Tape. If the tape cannot be ejected or  
the display continues to flash even when the tape  
has been properly reinserted, please switch off the  
power and consult your nearest service center.  
N/A File:  
A MP3 is played with a format that this unit can't  
support.E63  
No Name:  
• Attempted to display DNPS during the CD play  
having no disc names preset.E51  
• Attempted to display SNPS during the receiving  
session of the station having no station name  
preset.E50  
No Title:  
No Text:  
Attempted to display the disc title or track title while  
the MD having no MD title is being played.E53  
• Attempted to display the disc text or track text  
while the CD having no CD text is being played.E54  
• Attempted to display the ID3 tag while the MP3  
having no ID3 tag is being played.E52  
Load:  
Discs are being exchanged in the Disc changer.E57-1  
The unit is reading the data on the disc.E57-2  
F-Check:  
— 36 —  
 
Specifications  
Specifications subject to change without notice.  
FM tuner section  
CD player section  
Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz  
Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz  
Usable sensitivity (S/N = 30dB)....................9.3dBf (0.8 µV/75 )  
Quieting Sensitivity (S/N = 50dB) ..............15.2dBf (1.6 µV/75 )  
Frequency response ( 3.0 dB)..............................30 Hz – 15 kHz  
Signal to Noise ratio (MONO)..............................................70 dB  
Selectivity ( 400 kHz) ......................................................80 dB  
Stereo separation (1 kHz) ....................................................40 dB  
Laser diode....................................................GaAlAs (λ=780 nm)  
Digital filter (D/A)......................................8 Times Over Sampling  
D/A Converter ......................................................................1 Bit  
Spindle speed  
DPX-MP4030 ........................1000 – 400 rpm (CLV 2times)  
DPX-3030S/ 3030................................500 – 200 rpm (CLV)  
Wow & Flutter........................................Below Measurable Limit  
Frequency response ( 1 dB) ................................10 Hz – 20 kHz  
Total harmonic distortion (1 kHz) ......................................0.01 %  
Signal to Noise ratio ................................................93 dB (1 kHz)  
Dynamic range ....................................................................93 dB  
Channel separation..............................................................85 dB  
MP3 Decode (DPX-MP4030)  
AM tuner section  
Frequency range (9 kHz space) ....................531 kHz – 1611 kHz  
Frequency range (10 kHz space) ..................530 kHz – 1700 kHz  
Usable sensitivity (S/N = 20dB) ..........................28 dBµV (25 µV)  
................Compliant with MPEG-1.0/2.0/2.5 Audio Layer-3  
Cassette player section  
Tape speed ..............................................................4.76 cm/sec.  
Wow & Flutter (WRMS) ....................................................0.08 %  
Frequency response (70 µs)....................25 Hz – 22 kHz ( 3 dB)  
Separation (1 kHz) ..............................................................40 dB  
Signal to Noise ratio  
Audio section  
Maximum output power..................................................45 W × 4  
Full bandwidth power (at less than 1% THD) ................22 W × 4  
Preout level / Load ................................................1500mV/10kΩ  
Preout impedance............................................................600 Ω  
(Dolby NR OFF)..........................................................60 dB  
(Dolby B NR ON)........................................................68 dB  
General  
Operating voltage ............................14.4 V (11 – 16 V allowable)  
Current consumption ................................10.0 A at Rated power  
Installation size (W × H × D) ........................178 × 100 × 155 mm  
Weight ................................................................................2.3 kg  
— 37 —  
 
 

Intel Server 320014 003US User Manual
JVC CRT Television GGT0116 002A H User Manual
JVC DVD Recorder DR MH20SUJ User Manual
JVC Projector DLA RS55 User Manual
JVC Security Camera TK WD31 User Manual
Kenmore Range 7907060 User Manual
Kenmore Water Heater 153329264 38 GALLON SHORT User Manual
King Canada Sander KC 689 OSC 7 User Manual
Kodak Battery Charger KP100 User Manual
Konica Minolta Digital Camera KD 30M User Manual