Kenwood Stereo System KDC 4051UG User Manual

KDC-4051UG  
KDC-4051UR  
KDC-4051URY  
KDC-415UA  
KDC-415UR  
KDC-4251URY  
KDC-4451UQ  
KDC-4551UB  
KDC-455UW  
KDC-4651URY  
CIND-SRETCERIVUERCTION MANUAL  
CD-RECEIVER  
BEDIENUNGSANLEITUNG  
РИAHДИCОПTРPИЕУMKНИЦКИС KЯOMППOAKTЭДKИCСKПAЛMИУATAЦИИ  
АІНВТСОМТАРГНУІТКОЦЛАІЯ З ЕКСПЛУАТАЦІЇ  
“Made for iPod,andMade for iPhonemean that an electronic accessory has been designed to connect  
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple  
performance standards. Apple is not responsible for the operation of this device or its compliance with safety  
and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless  
performance.  
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and  
other countries.  
TheAAClogo is a trademark of Dolby Laboratories.  
This symbol mark indicates that Kenwood manufactured this product so as to decrease  
harmful influence on the environment.  
Изделие изготовлено в Индонезии  
Autogood products Internet store “130”  
© 2010 Kenwood Corporation All Rights Reserved.  
GET0689-005A (E0/E20)  
 
Safety  
CONTENTS  
Safety  
Preparation  
How to attach/detach the faceplate  
How to reset your unit  
Initial settings before operations  
2
4
WARNING  
Stop the car before operating the unit.  
Important to know...  
To prevent a short circuit, never put or  
leave any metallic objects (such as coins or  
metal tools) inside the unit.  
Caution: Adjust the volume so that you  
can hear sounds outside the car. Driving  
with the volume too high may cause an  
accident.  
Basic operations  
Getting started  
Canceling the display demonstration  
Setting the demonstration mode  
Adjusting the clock  
5
7
Condensation: When the car is air-  
conditioned, moisture may collect on the  
laser lens. This may cause disc read errors.  
In this case, remove the disc and wait for  
the moisture to eporate.  
Listening to the radio  
8
9
Adjust [SETTINGS] mode settings  
Listening to the other external components  
Listening to a disc/ USB device/ iPod 10  
Start playing a disc  
Functions of KDC-4651URY with remote controller  
(RC-405)  
This unit can only play the CDs with:  
Direct Music Search  
The illustrations in this manual are  
examples used to explain more clearly  
how the controls are used. Therefore, what  
appears on the illustrations may differ from  
what appears on the actual equipment.  
A USB connection cable, CA-U1EX (optional  
accessory) is required for connecting a USB  
device.  
Connecting a USB device  
Connecting an iPod (KDC-4551UB/ KDC-455UW/  
KDC-4651URY only)  
Selecting Repeat Play  
Selecting Random Play  
Selecting Scan Play  
Selecting a folder/track/file  
Functions of KDC-4551UB/ KDC-455UW
KDC-4651URY with iPod  
Alphabet Search and My Playlist for iPod  
iPod control by Hand Mode  
Adjust [SETTINGS] mode settings  
You can connect an Apple iPod/iPhone  
with KDC-4551UB/ KDC-455UW/ KDC-4651URY  
.
The wordiPodappearing in this manual  
indicates the iPod or iPhone connected  
to this unit with a connection cable,  
KCA-iP101 (optional accessory).  
Function settings  
13  
Using the remote controller (RC-405) 15  
If you experience problems during  
installation, consult your Kenwood dealer.  
When you purchase external components,  
check with your Kenwood dealer to make  
sure that they work with your model and in  
your area.  
Detailed information and notes about the  
playable audio files are stated in an online  
manual on the following site:  
Equipped for KDC-4651URY  
Troubleshooting  
Installation/connection  
Basic procedure  
Warning  
16  
17  
Caution  
Wiring connection  
Installing the unit  
Removing the unit  
Specifications  
21  
2
Autogood products Internet store “130”  
 
The marking of products using lasers  
Declaration of Conformity with regard to  
the EMC Directive 2004/108/EC  
Manufacturer:  
The label is attached to the chassis/case and  
says that the component uses laser beams  
that have been classified as Class 1. It means  
that the unit is utilizing laser beams that  
are of a weaker class. There is no danger of  
hazardous radiation outside the unit.  
Kenwood Corporation  
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,  
192-8525 Japan  
EU Representative’s:  
Kenwood Electronics Europe BV  
Amsterdamseweg 37, 1422 AC UITHOORN,  
The Netherlands  
For Turkey  
Bu ürün 26891sayılı Resmi Gazete’de  
yayımlanan Elektrikli ve Elektronik Eşyalarda  
Bazı Zararlı Maddelerin Kullanımının  
Sınırlandırılmasına Dair Yönetmeliğe uygun  
olarak üretilmiştir.  
This Product is not installed by the  
manufacturer of a vehicle on the production  
line, nor by the professional importer of a  
vehicle into an EU Member State.  
This product complies with Directive,  
Number 26891 regardingREGULATION ON  
THE RESTRICTION OF THE USE OF CERTAIN  
HAZARDOUS SUBSTANCES IN ELECTRICAL  
AND ELECTRONIC EQUIPMENT.  
Information on Disposal of Old Electrical  
and Electronic Equipment and Batteries  
(applicable for EU countries that have  
adopted separate waste collection  
systems)  
Products and batteries with the  
symbol (crossed-out wheeled bin)  
cannot be disposed as hold  
waste.  
Old electrical and electronic  
equipment and batteries should  
be recycled at a facility capable  
of handling these items and their  
waste byproducts.  
Contact your local authority  
for details in locating a recycle  
facility nearest to you. Proper  
recycling and waste disposal will  
help conserve resources whilst  
preventing detrimental effects on  
our health and the environment.  
Notice: The signPbbelow the  
symbol for batteries  
Muting upon the reception of a  
phone call  
To use this feature, connect the MUTE lead  
to your telephone using a commercial  
telephone accessory. (page 18, 19)  
When a call comes in, “CALLappears.  
The audio system pauses.  
To continue listen to the audio system  
during a call, press SRC. “CALL”  
disappear and the audio system resumes.  
When a call ends, “CALLdisappear.  
The audio system resumes.  
indicates that this battery  
contains lead.  
Autogood products Internet store “130”  
 
3
Preparation  
How to attach/detach the faceplate How to reset your unit  
If this unit fails to operate properly, press the  
reset button.  
1
1
The unit returns to factory  
settings when the reset  
button is pressed.  
2
2
Do not expose the faceplate to direct  
Reset button  
sunlight, excessive heat, or humidity. Also  
avoid places with too much dust or the  
possibility of water splashing.  
Keep the faceplate in its casing while  
detached.  
Initial settings before operations  
1
2
Press SRC to enter [STANDBY] mode.  
Press the volume knob to enter  
[FUNCTION] mode.  
The faceplate is a precision piece of  
equipment and can be damaged by shocks  
or jolts.  
To prevent deterioration, do not touch the  
terminals of the unit and faceplate with  
your fingers.  
3
4
Turn the volume knob to select  
[INITIAL SET], tn press to enter.  
Turn the volume knob to make a  
selection, then press to confirm.  
See table below for selection.  
5
Hold  
to finish the procedure.  
Item  
Selectsetting (Preset: *)  
PRESET TYPE  
NORMAL/ NORM*: Memorizes one station each preset button in each band (FM1/ FM2/ FM3/ MW/  
LW). ; MIX: Memorizes one station or eacpreset button regardless of the selected band (FM1/ FM2/  
FM3/ MW/ LW).  
KEY BEEP  
ON*/ OFF: Activates/dethe keypress tone.  
RUSSIAN SET  
ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;  
OFF*: Canels.  
P-OFF WAIT  
Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.  
––––: Cancels ; 20M*: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes  
BUILT-IN AUX/ ON1*: Outputs sound of the connected external component through the car speakers when “AUX” is  
BUILTIN AUX  
selected as the source. ; ON2: Outputs sound from the connected external component when “AUX” is  
selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no  
external component is connected). Turn the volume knob clockwise to return to the previous volume level. ;  
OFF: Disables “AUX” in source selection.  
CD READ  
1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No  
sound can be heard if an audio file disc is played.  
SWITCH PREOUT/ REAR*/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on  
SWITCH PRE  
the rear of the unit (through an external amplifier).  
SP SELECT  
F/W UP xx.xx  
OFF*/ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.  
YES: Starts upgrading the firmware. ; NO*: Cancels (upgrading is not activated).  
[SWITCH PREOUT/ SWITCH PRE] is selectable only with KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/  
KDC-4251URY/ KDC-4551UB/ KDC-455UW/ KDC-4651URY.  
4
Autogood products Internet store “130”  
 
Basic operations  
Display window  
KDC-4051UG/ KDC-4051UR/ KDC-4051URY/  
KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4451UQ:  
KDC-4551UB/ KDC-455UW/ KDC-4651URY:  
Volume knob  
Ejects the disc  
Detaches the faceplate  
Loading slot  
USB terminal  
Auxiliary input jack  
The illustration and button names or  
explanation in this manual ae oKDC-4551UB/  
KDC-455UW/ KDC-4651URY (unless mentioned  
otherwise).  
The following indicator lights up when...  
ST  
IN  
TI  
: A stereo broadcast is received.  
: A disc is in the unit.  
: Traffic Information function is  
turned on.  
Refer to the table below for the difference:  
RDS  
: Radio Data System service is  
available.  
KDC-4051UG/ KDC-4051UR/  
KDC-4551UB/  
KDC-4051URY/ KDC-415UA/  
KDC-455UW/  
KDC-4551UB/ KDC-455UW/ KDC-4651URY only:  
ATT (blink) : The sound attenuates.  
(Applicable only for KDC-4651URY  
using the remote controller  
(RC-405), page 15.)  
KDC-415UR/ KDC-4251URY/  
KDC-4651URY  
KDC-4451UQ  
iPod  
3 (ALL RDM)  
3
5
EQ  
: [SYSTEM Q] is set to an EQ  
mode other than [NATURAL].  
(page 13)  
5
(MEMO MY LIST)  
B.BOOST : [BASS BOOST] is set to [1] or  
[2]. (page 13)  
: In Search Mode or when a  
Playlist is displayed.  
Autogood products Internet store “130”  
 
5
When you press or hold the following button(s)...  
Button  
General operation  
Turns on.  
Turns off if pressed and held.  
Selects the available sources (TUNER, USB or iPod, CD, AUX, STANDBY), if the  
power is turned on.  
SRC  
If the source is ready, playback also starts. “iPod” and “CD” are selectable only  
when an iPod is connected or a disc is loaded.  
Volume knob  
(turn)  
Adjusts the volume level.  
Selects items.  
Volume knob  
(press)  
Confirms selection.  
Enters [FUNCTION] settings.  
Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW.  
Selects the next folder.  
BAND  
6 (  
)
Pauses/resumes playback of a disc/ USB device/ iPod.  
Searches for radio station.  
4
/
¢
Selects track/file.  
Fast-forwards/reverses tracks if pressed and held.  
Changes the display information.  
Scrolls the display information if pressed and held.  
Enters clock adjustment mode directly (page 7) if pressed and held while in  
clock display screen.  
SCRL DISP  
iPod  
KDC-4551UB/ KDC-455UW/ KC-4651URY only:  
SelectsiPodsource.  
Switches the olling terminal (HANDS ON/ HANDS OFF) for iPod  
playback if pressand held. (page 12)  
KDC-4051UG/ KDC-451UR/ KDC-4051URY/ KDC-415UA/ KDC-415UR/ KDC-4251URY/  
KDC-4451UQ only: Selects Random Play. (page 11)  
Returns to the previous item.  
Exit from setting mode if pressed and held.  
About “KENWOOD Music Editor”  
This unit supports the PC applicationKENWOOD Music Editor Light ver1.0or later.  
When you use the audio file with database information added by theKENWOOD Music  
Editor Light ver1.0,you can search a file by title, album or artist name using Music Search.  
In the Instruction manual, the termUSB deviceis used to mean the device that contains  
audio files with database information added with KENWOOD Music Editor.  
“KENWOOD Music Editor Light ver1.0is available from the following web site:  
For further information onKENWOOD Music Editor Light ver1.0,refer to the site above or  
the application help.  
6
Autogood products Internet store “130”  
 
Getting started  
5
6
7
Turn the volume knob to adjust the  
hour, then press to enter minute  
adjustment.  
Clock minutes flashes on the display.  
Turn the volume knob to adjust the  
minute, then press to confirm.  
Canceling the display  
demonstration  
The display demonstration is always turned  
on unless you cancel it.  
When you turn on the power (or after you  
reset the unit), the display shows:  
[CANCEL DEMO] \ [PRESS] \  
[VOLUME KNOB]  
Press 4  
hour and minute adjustment.  
Hold to finish the procedure.  
/
¢ to move between the  
1
Press the volume knob.  
[YES] is selected as the initial setup.  
Press the volume knob again to confirm.  
[DEMO OFF] appears.  
If no operation is done for about  
15 seconds or if you turn the volume knob  
2
Maintenance  
Cleaning the unit: Wipe off the dirt on the  
panel with a dry silicon or soft cloth. Failure  
to observe this prection may result in  
damage to the monitor or unit.  
to select [NO] in step 2, [DEMO MODE]  
appears and the display demonstration  
starts.  
Cleaning the connector: Wipe off dirt on  
the connector of the unit and faceplate.  
Use a cotton swab or cloth.  
Setting the demonstration mode  
1
2
3
Press the volume knob to enter  
[FUNCTION].  
Turn the volume knob to select  
[DEMO MODE], then press to er.  
Turn the volume knob to selecor  
[OFF].  
If [ON] is selected, display demonstration  
starts if no operation is done for about  
20 seconds.  
andling discs  
Do not touch the recording surface of  
the disc.  
Do not stick tape etc. on the disc, or use a  
disc with tape stuck on it.  
Do not use any accessories for the disc.  
Clean from the center of the disc and  
move outward.  
Clean the disc with a dry silicon or soft  
cloth. Do not use any solvents.  
When removing discs from this unit, pull  
them out horizontally.  
Remove the rims from the center hole  
and disc edge before inserting a disc.  
4
Hold  
to finish the procedure.  
Adjusting the clock  
1
2
3
4
Press the volume knob to enter  
[FUNCTION] mode.  
Turn the volume knob to select  
[SETTINGS], then press to enter.  
Turn the volume knob to select [CLOCK],  
then press to enter.  
Turn the volume knob to select [CLOCK  
ADJUST/ CLOCK ADJ], then press to  
enter.  
Clock hour flashes on the display.  
Autogood products Internet store “130”  
 
7
Listening to the radio  
Hold to turn on or off the Traffic Information function (not applicable ifMW/ LWis selected).  
Hold for about 2 seconds to memorize the current station or the selected Program  
Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.)  
Press briefly to recall memorized station (or Program Type after entering the PTY  
search mode).  
1
2
3
Press SRC to select “TUNER.”  
Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).  
Press 4 ¢ to search for a station.  
/
Adjust [SETTINGS] mode settings  
While listening to the radio...  
1
2
3
Press the volume knob to enter [FUNCTIOode.  
Turn the volume knob to select [SETTINGS], then press to enter.  
Turn the volume knob to make a selection, then press to confirm.  
See table below for selection
4
Hold  
to finish the procedur
Item  
Selectable setting (Preset: *)  
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF*: Cancels.  
SEEK MODE Selects the tuning mode for buttons.  
4
/
¢
AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset  
memory. ; MANUAL: Manually search for a station.  
AUTO  
YES: Automatically starts memorizing 6 stations with good reception. ; NO*: Cancels (automatic memorizing  
MEMORY  
is not activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 4)  
MONO SET  
ON: Improves the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes).  
PTY SEARCH Selects the available Program Type (page 9). Then, press  
4
/
¢
to start searching.  
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language  
(ENGLISH*/ FRENCH/ GERMAN), then press to confirm.  
NEWS SET  
AF SET  
00M – 90M: Sets the time for receiving the next news bulletin. ; OFF*: Cancels.  
ON*: Automatically searches for another station broadcasting the same program in the same Radio Data  
System network with better reception when the current reception is poor. ; OFF: Cancels.  
8
Autogood products Internet store “130”  
 
Item  
Selectable setting (Preset: *)  
RDS REGIONAL/ ON*: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.  
RDS REG  
AUTO TP SEEK/ ON*: Automatically searches for a station with better reception when the traffic information‘s reception is  
ATP SEEK  
poor. ; OFF: Cancels.  
[PTY SEARCH] is selectable only when the source is “FM.”  
[NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK] is selectable only when the source is “FM.” If  
other playback source is selected, these settings are selectable under [RDS SET] item. (page 14)  
Available Program Type:  
SPEECH  
DRAMA  
MUSIC  
CULTURE  
LIGHT M (music) CLASSICS  
NEWS  
AFFAIRS  
VARIED  
INFO  
SPORT  
EDUCATE  
SCIENCE  
POP M (music) ROCK M (music) EASY M (music)  
OTHER M (music) WEATHER  
TRAVEL  
FINANCE  
JAZZ  
CHILDREN  
COUNTRY  
SOCIAL  
NATION M (music)  
RELIGION  
OLDIES  
PHONE IN  
FOLK M (music) DOCUMENT  
LEISURE  
The unit will search for the Program type categorized under [SPEECH] or [MUSIC] if selected.  
[SPEECH] : White character item. ; [MUSIC] : Black character item.  
The Radio Data System feature won't work where the service is not ported by any  
broadcasting station.  
If the volume is adjusted during reception of traffic information, the adjusted volume is  
memorized automatically. It will be applied the next tme Traffic Information function is  
turned on.  
Listening to the oter external  
components  
Preparation : Make sure [ON1] or ] is selected for [BUILT-IN AUX/ BUILTIN AUX].  
(page 4)  
Auxiliary input jack  
1
2
Press SRC to select “AUX.”  
Turn on the external component and  
start playing.  
3
Turn the volume knob to adjust the  
volume.  
3.5 mm stereo mini plug  
(optional accessory)  
Portable audio device  
(optional accessory)  
Autogood products Internet store “130”  
 
9
Listening to a disc/ USB device/ iPod  
Ejects the disc. (“NO DISCappears andINindicator goes off.)  
Press to select track/file.  
Hold to fast-forwards/reverses.  
USB terminal  
Press to select next folder.  
lide open the cover.  
Start playing a disc  
1
2
Press SRC to turn on the power.  
Insert a disc into the loading slot.  
Playback starts automatically.  
Connecting a USB  
device  
3
Press number button 6 (  
) to  
resume/pause playback (if necessary).  
CA-U1EX  
(optional accessory)  
USB device (optional accessory)  
Connecting an iPod  
(KDC-4551UB/ KDC-455UW/  
KDC-4651URY only)  
Functions of KDC-4651URY with remote  
controller (RC-405)  
Direct Music Search  
Not available if Random Play, Scan Play,  
Apple iPod  
(optional accessory)  
iPod playback is selected.  
1
Press DIRECT to enter Direct Music  
Search Mode.  
KCA-iP101  
(optional accessory)  
“– – –” appears.  
2
3
Press the number buttons to enter the  
track number.  
Press 4 / ¢ to search for the music.  
The source automatically switches, and  
playback starts.  
To cancel the Direct Music Search Mode,  
press  
or EXIT.  
10  
Autogood products Internet store “130”  
 
To return to the root folder (or first track for  
audio CD), press BAND.  
Selecting Repeat Play  
Press number button 4 (REP) repeatedly  
to make a selection.  
To return to the previous folder, press  
.
To cancel the Music Search mode, press  
Audio CD : TRACK/ TRAC (track) REPEAT,  
REPEAT OFF  
AAC/MP3/WMA :  
FILE REPEAT, FOLD (folder) REPEAT,  
REPEAT OFF  
iPod : FILE REPEAT, REPEAT OFF  
and hold  
.
< or > on the display indicates that  
preceded/next item is available.  
For USB device* and iPod: To skip search,  
press 4 / ¢.  
* This operation is effective only for the files  
registered in the database created with  
Kenwood Music Editor. (page 6)  
Selecting Random Play  
Press number button 3 (ALL RDM) or  
repeatedly to make a selection.  
KDC-4551UB/ KDC-455UW/ KDC-4651URY only: To  
return to the top menu while in the search  
mode of an iPod, press BAND.  
Audio CD : DISC RANDOM, RANDOM OFF  
AAC/MP3/WMA/iPod :  
FOLDER/ FOLD (folder) RANDOM,  
RANDOM OFF  
Discs that cannot bused  
Discs that are not und.  
Press and hold number button  
Discs with coloring on the recording  
surface or discs that are dirty.  
You cannot play a Recordable/ReWritable  
disc that has not been finalized. (For the  
finalization process refer to your disc  
riting software, and your disc recorder  
instruction manual.)  
3-inch CD cannot be used. Attempt  
to insert using an adapter can cause  
malfunction.  
3 (ALL RDM) or  
to select  
“ALL RANDOM.”  
– Applicable only ifRANDOM OFFis  
selected initially.  
KDC-4551UB/ KDC-455UW/ KDC-4651URY only:  
Changes the iPod browsing item to  
“songs.”  
Selecting Scan Play  
Press number button 2 (SCAN)  
repeatedly to make a selection.  
About USB device  
This unit can play AAC/MP3/WMA files  
stored on a USB mass storage class  
device.  
Install the USB device in the place where  
it will not prevent you from driving your  
vehicle properly.  
You cannot connect a USB device via a  
USB hub and Multi Card Reader.  
Make sure all important data has been  
backed up to avoid losing the data.  
Connecting a cable whose total length is  
longer than 5 m can result in abnormal  
playback.  
Audio CD : TRACK/ TRAC (track) SCAN,  
SCAN OFF  
AAC/MP3/WMA : FILE SCAN, SCAN OFF  
If scan play is selected, the unit starts  
playing the first 10-second intro of the  
music in the disc/current folder.  
If “SCAN OFFis selected, the unit resumes  
normal play of the current song.  
Selecting a folder/track/file  
1
Press  
to enter Music Search mode.  
“SEARCH” appears, then the current file  
name appears on the display.  
2
Turn the volume knob to select a folder/  
track/file, then press to confirm.  
Autogood products Internet store “130”  
 
11  
Functions of KDC-4551UB/ KDC-455UW/ KDC-4651URY with iPod  
Alphabet Search and My Playlist  
for iPod  
Playing a song on the playlist  
1
Press number button 5 (MEMO MY LIST)  
to display the playlist.  
Selecting a song by alphabet  
“MY PLAYLIST” appears.  
1
2
3
Press  
“SEARCH” appears.  
Turn the volume knob to select a  
category, then press to confirm.  
Press  
to enter Music Search mode.  
2
Turn the volume knob to select the song  
you want, then press to confirm.  
Random play cannot be performed during  
playback of a song in the playlist.  
again to enter alphabet search  
mode.  
“SEARCH <  
Deleting a song on the playlist  
>” appears.  
– – –  
1
2
3
Press number button 5 (MEMO MY LIST)  
to display the playlist.  
“MY PLAYLIST” appears.  
Turn the volume knob to select the song  
you want to delete, then press and hold  
the volume kn
Turn the volume knob to select  
“DELETE ONE” or “DELETE ALL,” then  
press to confirm.  
4
5
Turn the volume knob to select the  
character to be searched for.  
Press 4 / ¢ to move to the entry  
position.  
You can enter up to three characters.  
Press the volume knob to start  
searching.  
6
To cancel the Alphabet Search mode, press  
and hold  
.
Select “DELETE ALL” to delete all the songs  
in the playlist.  
Turn the volume knob to select “YES,”  
then press to confirm.  
“COMPLETE” appears.  
A longer searching time is required if there  
are many songs or playlists in the iPod.  
To search for a character other than A to Z  
and 0 to 9, enter only .  
*
The article (a, an, the) of songs name will  
be skipped during search.  
iPod control by Hand Mode  
Press and hold iPod to enter iPod mode.  
Registering songs in the playlist  
1
Select and play the song you want to  
register. (page 11)  
HANDS ON :  
Control iPod from the iPod. “iPod MODE”  
appears on the display.  
HANDS OFF: Control iPod from the unit.  
2
Press and hold number button  
5 (MEMO MY LIST) to register.  
“## STORED” (registration number)  
appears.  
You can register up to 10 songs. “MEMORY Adjust [SETTINGS] mode settings  
FULL” appears, if you try to register the  
eleventh song.  
While listening to an iPod...  
1
2
3
Press the volume knob to enter  
[FUNCTION] mode.  
Turn the volume knob to select  
[SETTINGS], then press to enter.  
Turn the volume knob to make a  
selection, then press to confirm.  
See the following table for selection.  
If you attempt to register a song from  
a different iPod, “NO INFOfollowed by  
“MPLIST DELETEappears.  
To delete the playlist, turn the volume knob  
to selectYES,then press to confirm.  
You can also register the song displayed in  
the Music Search mode by following the  
same procedure.  
4
Hold  
to finish the procedure.  
Do not register Podcasts.  
12  
Autogood products Internet store “130”  
 
Functions of KDC-4551UB/ KDC-455UW/ KDC-4651URY with iPod  
Item  
Selectable setting (Preset: *)  
SKIP SEARCH 0.5%*/ 1%/ 5%/ 10%: Sets the ratio of skip when searching for a song in Music Search mode.  
(Holding 4 / ¢ skips songs at 10% regardless of the setting made.)  
MPLIST DELETE YES: Deletes the saved My Playlist. ; NO*: Cancels.  
About compatible iPod/iPhone  
Made for  
For the latest compatible list and software  
version of iPod/iPhone, see:  
If you start playback after connecting the  
iPod, the music that has been played by  
the iPod is played first.  
– iPod touch (1st, 2nd, and 3rd generation)  
– iPod classic  
– iPod with video  
– iPod nano (1st, 2nd, 3rd, 4th, and 5th  
generation)  
– iPhone 4  
– iPhone 3GS  
– iPhone 3G  
– iPhone  
In this case, “RESUMINGis displayed  
without displaying a folder name, etc.  
Changing the broitem will display a  
correct title, etc.  
You cannot operate iPod ifKENWOODor  
displayed on iPod.  
Function settings  
1
2
Press the volume knob to enter [FUNCTION] mode.  
Turn the volume knob to seleUDIO CONTROL/ AUDIO CTRL] or [SETTINGS], then  
press to enter.  
3
Turn the volume knob to make a selection, then press to confirm.  
See table below for election.  
Repeat step 3 until the desired item is selected/activated.  
Press  
to return to the previous item.  
4
Hold  
to finish the procedure.  
[AUDIO CONTROL/ AUDIO CTRL] : While listening to any source except in STANDBY state...  
Item  
SUB-W LEVEL  
BASS BOOST  
SYSTEM Q  
Selectable setting (Preset: *)  
–15 — +15 (Preset: 0): Adjusts the subwoofer output level.  
B.BOOST LV1*/ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.  
NATURAL*/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to  
the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)  
BASS CTR FRQ/ BASS C FRQ: 60/ 80/ 100*/ 200: Selects the center frequency.  
BASS LEVEL: –8 — +8 (Preset: 0): Adjusts the level.  
BASS ADJUST  
BASS Q FACTOR/ BASS Q FCTR: 1.00*/ 1.25/ 1.50/ 2.00: Adjusts the Q factor.  
BASS EXTEND: ON: Turns on the extended bass. ; OFF*: Cancels.  
Continued...  
Autogood products Internet store “130”  
 
13  
Item  
MID ADJUST  
Selectable setting (Preset: *)  
MIC CTR FRQ/ MID C FRQ: 0.5K/ 1.0K*/ 1.5K/ 2.5K: Selects the center frequency.  
MID LEVEL: –8 — +8 (Preset: 0): Adjusts the level.  
MID Q FACTOR/ MID Q FCTR: 0.75/ 1.00*/ 1.25: Adjusts the Q factor.  
TRE CTR FRQ/ TRE C FRQ: 10.0K/ 12.5K*/ 15.0K/ 17.5K: Selects the center frequency.  
TRE LEVEL: –8 — +8 (Preset: 0): Adjusts the level.  
TRE ADJUST  
BALANCE  
FADER  
L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.  
R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.  
SUBWOOFER SET/ SUB-W SET  
DETAILED SET/ DETAIL SET  
ON*: Turns on the subwoofer output. ; OFF: Cancels.  
LPF SUBWOOFER/ THROUGH*: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies higher  
LPF SUB-W:  
than 85 Hz/ 120 Hz/ 160 Hz are cut off.  
SUB-W PHASE:  
REVERSE/ REV (180°) NORMAL/ NORM (0°)* Selects the phase angle of the subwoofer  
/
:
output to be in line with the speaker output for optimum performance. (Selectable only if a  
setting other than [THROUGH] is selected for [LPF SUBWOOFER/ LPF SUB-W].)  
ON*: Creates realistic sound by interpolating the high-frequey components that are lost in  
AAC/ MP3/ WMA audio compression. ; OFF: Cancels. (Seleble only when playback an AAC/  
MP3/ WMA disc or a USB device, except iPod.)  
SUPREME SET:  
VOLUME OFFSET/ –8 — +8 (for AUX) ; –8 — 0 (for other sources) Presets the volume adjustment level of  
:
VOL OFFSET:  
(Preset: 0)  
each source. The volume level will automatically increase or decrease when you change the  
source. (Before making an adjustment, select the source you want to adjust.)  
Select a source before making a source tone memory adjusBASS ADJUST/ MID ADJUST/ TRE ADJUST].  
KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/ KDC-455UW/ KDC-4651URY  
only:  
[SUB-W LEVEL/ SUBWOOFER SET/ SUBET/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if  
[SWITCH PREOUT/ SWITCH PRE] is set to W]. (page 4)  
[SUB-W LEVEL/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUBWOOFER SET/ SUB-W SET] is  
set to [ON].  
[SETTINGS]  
Item  
Selectable setting (Preset: *)  
AUX NAME SET/ AUX*/ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.  
AUX NAME  
CLOCK  
(Selectable only if “AUX” is selected as the source.)  
CLOCK ADJUST/ CLOCK ADJ: (For details, see page 7.)  
TIME SYNC:  
ON*: Synchronizes the Radio Data System station time data and the unit’s clock. ;  
OFF: Cancels.  
DISPLAY  
RDS SET  
DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels.  
TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;  
OFF*: Cancels.  
NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK: Selectable only if any source  
other than tuner source is selected. (For details, see page 8, 9.)  
14  
Autogood products Internet store “130”  
 
Using the remote controller (RC-405)  
Equipped for KDC-4651URY  
Remote sensor  
Do not expose to bright sunlight.  
Preparation:  
When you use the remote controller for the  
first time, pull out the insulation sheet.  
Insulation sheet  
Basic operations:  
If the effectiveness of the remote  
controller decreases, replace the battery.  
VOL  
: Selects the available sources.  
: Adjusts the volume level.  
5 / : Selects folders/files (in Music  
Search mode).  
4
2
ENT  
:
Pauses/resumes playback.  
Confirms selection (in Music  
Search mode).  
*AM– / #FM+: Selects bands.  
Selects folders.  
1
Caution:  
4 / ¢ (+): Searches for radio station.  
Selects track/file.  
Do not set the remote control in hot places  
such as on the dashboard.  
Lithium battery.  
1 – 6  
AUD  
: Selects preset station.  
: Enters [AUDIO CONTROL]  
settings directly.  
: Attenuates the sound. (To return  
to the previous level, press the  
button again.)  
Danger of explosion if the battery is  
incorrectly replaced. Replace only with the  
same or equivalent type.  
The battery pack or batteries shall not be  
exposed to excessive heat such sunshine,  
fire or the like.  
ATT  
: Returns to the previous item (in  
Music Search mode).  
Keep battery out of reach of children and in  
original package until ready to use. Dispose  
of used batteries promptly. If swallowed  
contact physician immediately.  
EXIT  
: Exit from setting mode.  
Autogood products Internet store “130”  
 
15  
Troubleshooting  
Symptom  
Remedy/Cause  
Adjust the volume to the optimum level. / Check the cords and connections.  
“PROTECT” appears and no operations can Check to be sure the terminals of the speaker leads are covered with insulating  
Sound cannot be heard.  
be done.  
tape properly, then reset the unit. If “PROTECT” does not disappear, consult your  
nearest service center.  
The unit does not work at all.  
Reset the unit.  
[P-OFF WAIT] does not work.  
Turn off the demonstration mode. (page 7)  
Radio reception is poor. / Static noise while Connect the antenna firmly. / Pull the antenna out all the way.  
listening to the radio.  
“IN” flashes.  
The CD player is not operating properly. Reinsert the disc properly. If the condition  
did not improve, turn off the unit and consult your nearest service center.  
CD-R/CD-RW cannot be played back and Insert a finalized CD-R/CD-RW (finalize with the component which you used for  
tracks cannot be skipped.  
recording).  
Disc sound is sometimes interrupted.  
Stop playback while driving on rough roads. / Cange the disc. / Check the cords  
and connections.  
“NA FILE” appears.  
“NO DISC” appears.  
“TOC ERROR” appears.  
The unit is playing an unsupported audio fie.  
Insert a playable disc into the loading slot.  
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try  
another disc instead.  
“ERROR 99” appears.  
The unit is malfuning for some reason. Press the reset button on the unit. If  
the “ERROR 99” coes not disappear, consult your nearest service center.  
A copy-protectefile is played.  
“COPY PRO” appears.  
“READ ERROR” appears.  
py the files and folders for the USB device again. If the error message is still  
ed, initialize the USB device or use other USB devices.  
No USB device is connected. Connect an USB device, and change the source to  
USB again.  
“NO DEVICE” appears.  
“NO MUSIC” appears.  
“NA DEVICE” appears.  
“USB ERROR” appears.  
The connected USB device contains no playable audio file.  
Connect a supported USB device, and check the connections.  
Remove the USB device, turn the unit off, then turn it on again. If the unit still  
showing the same display, try to connect another USB device.  
Reconnect the iPod. / Confirm that the software for the iPod is the latest version.  
Skip to another track or change the disc.  
“iPod ERROR” appears.  
Noise is generated.  
Tracks cannot play back as you have  
intended them to play.  
Playback order is determined when files are recorded.  
“READING” keeps flashing.  
Elapsed playing time is not correct.  
Longer readout time is required. Do not use too many hierarchies and folders.  
This is caused by how the tracks are recorded.  
The number of songs contained in “SONGS” Podcast files are not counted in this unit as this unit does not support the  
category of this unit is different from that playback of podcast files.  
contained in “SONGS” category of iPod.  
Correct characters are not displayed (e.g. This unit can only display letters (upper case), numbers, and a limited number of  
album name).  
symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET]  
is set to [ON]. (page 4)  
16  
Autogood products Internet store “130”  
 
Installation/connection  
Part list:  
Caution  
A Faceplate.............................................................. (×1)  
If your car's ignition does not have an ACC  
B Escutcheon......................................................... (×1)  
C Mounting sleeve............................................. (×1)  
D Casing for faceplate ...................................... (×1)  
E Wiring harness.................................................. (×1)  
F Removal tool .................................................... (×2)  
position, connect the ignition wires to a  
power source that can be turned on and  
off with the ignition key. If you connect  
the ignition wire to a power source with  
a constant voltage supply, as with battery  
wires, the battery may die.  
Do not use your own screws. Use only the  
screws provided.  
Install this unit in the console of your  
vehicle. Make sure the faceplate will not hit  
the lid of the console (if any) when closing  
and opening.  
Basic procedure  
1
Remove the key from the ignition  
switch, then disconnect the · terminal  
of the car battery.  
2
Make proper input and output wire  
connections.  
\ “Wiring connection” (page 18, 19)  
Install the unit to your car.  
\ “Installing the unit” (page 20)  
Reconnect the · terminal of the car  
battery.  
After the unit is insed, check whether  
the brake lamps, blinkers, wipers, etc. on  
the car are working properly.  
Mount the unit so that the mounting angle  
is 30° or less.  
If the fuse blows, first make sure the wires  
e not touching to cause a short circuit,  
then replace the old fuse with one that has  
the same rating.  
Connect the speaker wires correctly to the  
terminals to which they correspond. The  
unit may be damaged or fail to work if you  
share the · wires or ground them to any  
metal part in the car.  
When only two speakers are being  
connected to the system, connect the  
connectors either to both the front output  
terminals or to both the rear output  
terminals (do not mix front and rear).  
Do not touch the metal part of this unit  
during and shortly after the use of the  
unit. Metal part such as the heat sink and  
enclosure become hot.  
3
4
5
Reset the unit. (page 4)  
Warning  
The unit can only be installed in a car with  
a 12 V DC power supply, negativund.  
If you connect the ignition wire (rend  
the battery wire (yellow) to the car chassis  
(ground), you may caue a short circuit,  
that in turn may start a fire. Always connect  
those wires to the power source running  
through the fuse box.  
Disconnect the battery's negative terminal  
and make all electrical connections before  
installing the unit.  
Insulate unconnected wires with vinyl tape  
or other similar material. If no connections  
are made, do not let the wire come out  
from the tab to prevent short circuit.  
Be sure to ground this unit to the car's  
chassis again after installation.  
Mounting and wiring this product requires  
skills and experience. For safety's sake, leave  
this work to professionals.  
If you experience problems during  
installation, consult your Kenwood dealer.  
Autogood products Internet store “130”  
17  
 
Wiring connection  
For KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/  
KDC-455UW/ KDC-4651URY  
KDC-4251URY/ KDC-4651URY  
KDC-4051UG/ KDC-4051UR/ KDC-415UA/  
KDC-415UR/ KDC-4551UB/ KDC-455UW  
Front output terminals  
Rear/subwoofer output terminals  
Rear/subwoofer output  
terminals  
Fuse (10 A)  
Antenna terminal (JASO)  
KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/  
KDC-4551UB/ KDC-455UW/ KDC-4651URY: To the  
steering wheel remote contropter (optional accessory)  
Light blue/yellow  
(Steering remote control wire)  
Blue/White  
(Power control/motor antenna  
control wire)  
To the power control terminal when using the optional power  
amplifier, r to the antenna control terminal in the vehicle.  
erminal that is grounded when either the telephone rings  
or during conversation. (To connect the Kenwood navigation  
system, consult your navigation manual.)  
Brown  
(Mute control wire)  
Connecting the ISO connectors on some VW/Audi or  
Opel (Vauxhall) automobiles  
You may need to modify the wiring of the supplied  
Yellow (Battery wire)  
Red (Ignition wire)  
wiring harness as illustrated below.  
Ignition wire  
(Red)  
A7 (Red)  
Vehicle  
A4 (Yellow)  
Red (A7)  
Unit  
Yellow (A4)  
Battery wire  
(Yellow)  
ISO connectors  
Default wiring  
Pin  
A4  
A5  
A7  
A8  
Color and function  
Pin  
B1 / B2 Purple  
Color and function  
Yellow  
Battery  
ª
/ Purple/black  
·
Rear speaker (right)  
Front speaker (right)  
Front speaker (left)  
Rear speaker (left)  
Blue/White Power control  
B3 / B4 Gray  
B5 / B6 White  
B7 / B8 Green  
ª
/ Gray/black  
·
Red  
Black  
Ignition (ACC)  
Earth (ground) connection  
ª
ª
/ White/black  
/ Green/black  
·
·
18  
Autogood products Internet store “130”  
 
For KDC-4051URY/ KDC-4451UQ  
Fuse (10 A)  
Antenna terminal (JASO)  
White (+) / White/black (–) : To front speaker (left)  
Gray (+) / Gray/black (–) : To front speaker (right)  
Green (+) / Green/black (–) : To rear speaker (left)  
Purple (+) / Purple/black (–) : To rear speaker (right)  
Blue  
To the antenna control terminal in the vehicle.  
(Motor antenna control wire)  
Blue/White  
(Power control wire)  
To the power control terminal when using the optional power amplifier.  
To he terminal that is grounded when either the telephone rings or  
during conversation. (To connect the Kenwood navigation system,  
consult your navigation manual.)  
Brown  
(Mute control wire)  
Car fuse box  
Ignition key switch  
Red (Ignition wire)  
Yellow (Battery wire)  
Car fuse box  
Battery  
Black (Ground wire)  
To the metallic body or chassis of the car  
Autogood products Internet store “130”  
 
19  
Installing the unit  
1
Connect the wiring harness to the unit. Other wiring  
connection has been completed earlier. (page 18, 19)  
2
Before attaching, make sure the direction of  
the escutcheon is correct. (Wider hooks on  
the top side.)  
Dashboard of your car  
Bend the appropriate tabs to hold the  
mounting sleeve firly in place.  
Removing the unit  
1
Detach the faceplate.  
2
Engage the catch pin on the removal  
tools into the holes on both sides of he  
escutcheon, then pull it out.  
Insert the removal tools deeo  
the slots on each side, then follthe  
arrows instructions as shown on the  
right.  
3
About Audio file  
Playable Audio file: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)  
Playable disc media: CD-R/RW/ROM  
Playable disc file format: ISO 9660 Level 1/2, Joliet, Romeo, Long file name.  
Playable USB device file system: FAT16, FAT32  
Although the audio files are complied with the standards listed above, the play maybe  
impossible depending on the types or conditions of media or device.  
20  
Autogood products Internet store “130”  
 
Specifications  
FM tuner section  
USB interface  
Frequency range:  
FM1/ FM2/ FM3 (50 kHz space):  
87.5 MHz — 108.0 MHz  
USB standard: USB1.1/ 2.0 (Full speed)  
Maximum supply current: 500 mA  
File system: FAT16/ 32  
For KDC-4451UQ  
FM1/ FM2 (50 kHz space):  
:
AAC decode: AAC-LC.m4afiles  
MP3 decode: Compliant with MPEG-1/2 Audio  
Layer-3  
87.5 MHz — 108.0 MHz  
FM3 (30 kHz space):  
WMA decode: Compliant with Windows  
Media Audio  
65.00 MHz — 74.00 MHz  
Usable sensitivity (S/N= 26 dB): 1.0 μV/75 Ω  
Quieting sensitivity (DIN S/N = 46 dB): 2.5 μV/75 Ω  
Frequency response ( 3 dB): 30 Hz — 15 kHz  
Signal-to-Noise ratio (MONO): 63 dB  
Stereo separation (1 kHz): 40 dB  
Audio section  
Maximum output power: 50 W × 4  
Output power (DIN 45324, +B = 14.4 V): 30 W × 4  
Speaker impedance: 4 Ω — 8 Ω  
Tone action: Bass: 0 Hz 8 dB  
Middle: 1 kHz 8 dB  
MW tuner section  
Frequency range (9 kHz space):  
531 kHz — 1 611 kHz  
Usable sensitivity (S/N= 20 dB): 36 μV  
Treble: 10 kHz 8 dB  
For KDC-4051UG/ KDC-4051UR/ KDC-415UA/  
KDC-415UR/ KDC-4251URY/ KDC-4551UB/  
KDC-455UW/ KDC-4651URY  
:
Preout level / load (CD): 2 000 mV/10 kΩ  
Preout impedance: ≤ 600 Ω  
LW tuner section  
Frequency range: 153 kHz — 279 kHz  
Usable sensitivity (S/N = 20 dB): 57 μV  
Auxiliary input section  
Frequency response ( 3 dB): 20 Hz — 20 kHz  
Input maximum voltage: 1 200 mV  
Input impedance: 10 kΩ  
CD player section  
Laser diode: GaAIAs  
Digital filter (D/A): 8 Times Over Sampling  
D/A converter: 24 Bit  
Spindle speed: 500 rpm — 200 rpm (CLV)  
Wow & Flutter: Below Measurable Limit  
Frequency response ( 1 dB): 20 Hz — 20 kHz  
Total harmonic distortion (1 kHz): 0.01 %  
Signal-to-Noise ratio (1 kHz): 105 dB  
Dynamic range: 90 dB  
General  
Operating voltage (11 V — 16 V allowable): 14.4 V  
Maximum current consumption: 10 A  
Installation size (W × H × D):  
182 mm × 53 mm × 158 mm  
Weight: 1.3 kg  
AAC decode: AAC-LC.m4afiles  
MP3 decode: Compliant with MPEG-1/2 Audio Subject to change without notice.  
Layer-3  
WMA decode: Compliant with Windows  
Media Audio  
Autogood products Internet store “130”  
21  
 

Indesit Washer Accessories IWE 8128 User Manual
InFocus Cordless Drill DS 14DAL User Manual
Jet Tools Dust Collector DC 1200A User Manual
JVC DVD Player XV M555BK User Manual
Kambrook Fan KFH310 User Manual
Kenmore Water System 62538306 User Manual
Kentrox Computer Hardware AI296 User Manual
Kenwood Car Stereo System TM D700A TM D700E User Manual
Kenwood Rice Cooker RC400 User Manual
Konica Minolta Digital Camera KD 410Z User Manual