Kenwood Universal Remote RC R0507 User Manual

Remote Control Instruction Manual  
Quick start guide.......................................... 1  
Getting the most from your remote control........... 3  
Setup code chart .......................................... 7  
In case of difficulty ...................................... 13  
Remote operation of other components ............. 14  
Remote Control Instruction Manual  
Preset Remote Control Quick Start Guide  
POWER  
4
MACRO  
VIDEO  
SHIFT  
TV  
Thisquickstartguideexplainshowtosetuptheremote  
control to operate audio and video components other  
than the receiver.  
AUDIO  
2
In order to make full use of the functions of the remote  
control, be sure to read the section of this manual  
entitled “Getting the most from your remote control”.  
It contains a detailed explanation of how to operate the  
remote control and make the necessary settings.  
The quick start guide describes the operation of the  
following keys:  
8
P. CALL  
P. CALL  
BAND  
6
4
¢
7
1 ENT key  
REC  
GUIDE  
Gets you into and out of the preset code registration  
mode.  
TUNING/SKIP  
VOLUME  
MUTE  
2 VIDEO, AUDIO, and TV keys  
Use these keys to select the input you want to register.  
LISTEN  
MODE  
3 Numeric keys  
SUBWOOFER  
SOUND  
SETUP  
In the preset code registration mode, you use these  
keys to enter the code numbers that let you control your  
components.  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
4 POWER key  
1
2
3
Once you have entered the setup code for another  
component, you can press this key to turn power to that  
component on or off. This lets you confirm that you  
entered the code properly.  
TV/SAT/VID  
INFO  
ALT AUD  
4
5
6
+100  
REPEAT  
RANDOM  
3
7
8
9
DISPLAY  
0
This instruction manual is for some models.  
Model availability and features (functions) may differ depending on  
the country and sales area.  
+10  
ENT  
1
REMOTE CONTROL UNIT  
RmeCntrol  
B60-3617-00 00 CS MA (T, E2, Q, X) ID  
99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2  
 
Getting the most from your remote control  
RC-R0507 (En/T)  
The remote control supplied with this receiver is also  
capable of controlling components from a variety of manu-  
facturers once you register the appropriate setup codes  
into the remote control unit.  
Refer to "Remote operation of other components" for de-  
tails about the operations available for each component.  
3
Press the VIDEO, AUDIO, or TV key repeatedly to select  
3
the desired component.  
VIDEO key  
AUDIO key  
1CD (CD)  
TV key  
1TV1  
Low battery warning  
1VIDEO1 (VCR1)  
2VIDEO2 (VCR2)  
3VIDEO3 (DVD)  
or DVD 6ch  
Replace all four batteries with new ones when you notice a shortening  
of the distance from which the remote control will operate or if the  
remote control blinks 5 times when you press a key. The remote  
control is designed to retain setup codes in memory while you  
change batteries.  
2TAPE or MD  
(TAPE)  
3PHONO  
2TV2  
3CABLE  
• Example : To register the component connected to the VIDEO 1  
jacks, select "VIDEO 1 (VCR1)".  
• On models other than the KRF-V8010D, “DVD 6ch” is displayed  
instead of “VIDEO 3”. It is possible to enter a setup code for the  
DVD 6ch input, but the display indication will remain “DVD 6ch”.  
It is not possible to change the name of this input.  
Registering setup codes for other components  
POWER  
SP  
A
L
R
SW  
VIDEO, AUDIO, TV  
V
CR1  
4Use the numeric keys to enter the setup code.  
• Example:Press"5258"toregisteraLDplayermadebyKENWOOD.  
• The backlight flashes once each time a number is entered.  
• If an invalid setup code is entered the remote will output one long  
blink, disregard that code and return to the beginning of step 4.  
• If you push an invalid key, the remote will exit the setup mode.  
1-0  
ENT  
1Find the setup code of the component to be registered.  
• Refer to the setup code lists to find the setup code for the  
Press the POWER key, and check to see that the compo-  
nent you want to control turns on.  
5
component to be registered.  
RC7  
If the component does not react, and there is more than one  
setup code, enter another setup code and try again.  
Example: To register a CD made by KENWOOD, you would enter  
"8028".  
• When registering setup codes for KENWOOD audio components  
which are connected to this unit by system control cords, use the  
following codes to insure proper system control operation:  
Cassette: 7000, CD: 8099, MD: 9000.  
PLAY, TUNING/SKIP (+/–) or MULTI CONTROL key can also be  
used instead of POWER key.  
• If the component is already on, pressing POWER key will turn it off.  
6Press the ENT key to store the code you have just input.  
Input  
(CD)  
Component  
Maker  
Code  
Key  
CD player  
KENWOOD 8028, 8037  
AUDIO  
• The backlight flashes twice.  
• This code replaces any previous setup codes entered for the  
respective component.  
Repeat steps 3 to 6 to register additional components  
until all components have been registered.  
7
• If you have components that are not remote controllable, like a  
record player (etc.), you will need to register a Non-IR code at the  
respective input. This keeps the respective input in the remote  
control's cyclic list so you can select it using the remote control.  
Please consult the owner's manual of the components you are  
connecting for information regarding remote controllability. The list  
of Non-IR codes is included at the beginning of the Setup code  
chart.  
TV 1  
TV 2  
CABLE  
2Hold down the ENT key until the backlight flashes twice.  
• At this time all inputs become available regardless of any earlier  
registration.  
Continued to next page  
For step 2 through step 8, make sure you start the next step  
within five seconds of completing the previous one. If more  
than five seconds elapses between any two steps, you will  
need to go back and start over from step 2.  
RmeCntrol  
 
Getting the most from your remote control  
RC-R0507 (En/T)  
Operating other components  
4
This operation lets you operate the registered components.  
KENWOOD audio components with system control turn on and off  
automatically with the receiver via the system control connections.  
Once setup codes have been entered for all components,  
hold down the ENT key until the backlight flashes twice.  
8
• Once registered, the display on the receiver shows the component  
type instead of the default input name.  
Example:ifyouregisteraVCRattheVIDEO1jacks, "VCR"appears  
instead of "VIDEO 1 (VCR1)".  
POWER  
SHIFT  
VIDEO, AUDIO, TV  
• After initial setup, any VIDEO or TV (TV1, TV2, CABLE) inputs that  
have not been programmed with a setup code or Non-IR code are  
deleted from the cyclic list. The PHONO input will be deleted if a  
Non-IR code was not registered.  
• The INPUT SELECTOR on the front panel of the receiver always  
cycles through all inputs.  
Use the VIDEO, AUDIO, or TV keys to select the compo-  
nent you desire.  
1
Note  
Although each setup code is designed to work with a number of  
different models, certain codes may not work with some models.  
(Also, certain codes may only operate some of the functions available  
on a given model.)  
• Pressing the VIDEO or AUDIO key also changes the input selector  
on the receiver. If you do not want to change the current input,  
press the SHIFT key before step 1.  
RC5  
VIDEO key  
1 VIDEO1 (VCR 1)  
AUDIO key  
1 CD (CD)  
TV key  
1 TV1  
2 TV2  
3 CABLE  
2 VIDEO2 (VCR 2)  
3 VIDEO3 (DVD)  
or DVD 6ch  
4 Not used by this  
remote control.  
(<--->)  
2 TAPE or MD  
(TAPE)  
3 TUNER  
4 PHONO  
Press the SHIFT key and then press the POWER key  
(within 3 seconds).  
2
• Pressing the SHIFT key is only required when turning the selected  
component on or off. Pressing the POWER key directy turns the  
receiver on and off.  
3Press the operation keys you desire.  
• See "Remote operation of other components" at the end of this  
manual for a list of keys available with each component.  
RC$  
The remote control mode remains in the set at the component  
selected in step 1 mode until you select another component  
(etc.).  
Note  
Besuretopointtheremotecontrolattheremotesensoronthereceiver  
when you want to operate KENWOOD components connected by  
system control cords. Otherwise, point the remote control at the  
component you want to operate.  
RemCntrol  
 
Getting the most from your remote control  
RC-R0507 (En/T)  
Changing (confirming) the operation mode  
Preparing for automatic operations  
5
(MACRO play)  
This operation lets you change the remote control operation mode  
without changing the input selector.  
You may find this useful when you want to control one component while  
using another. (For example, if you want to rewind the tape deck while  
listening to a CD.)  
This operation is also useful if you don't know the which mode the  
remote control is set to. Executing this operation allows you to change  
or reconfirm the operation mode you desire.  
The macro play function allows you to set the remote to control several  
components in succession. After completing this setup, you can  
perform a series of operations automatically. Enter the setup codes for  
the components you want to control beforehand.  
MACRO  
VIDEO, AUDIO, TV  
SHIFT  
VIDEO, AUDIO, TV  
1Make a plan of the macro play you want to Setup.  
The order of the operations may be fairly complex and you may  
not be remember all of the necessary commands during the  
setup procedure.  
Use the space provided below to write down the operations in  
the order you are going to enter them.  
1Press the SHIFT key.  
• To operate a TV, start from step 2.  
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
&
*
(
)
Go to step 2 within 3 seconds.  
Press the VIDEO, AUDIO or TV key repeatedly to display  
the remote control mode for the component you want to  
control.  
2
SP  
A
L
R
SW  
CD  
The component to be controlled is displayed in parenthesis  
• Up to 20 steps can be memorized for each macro.  
• The example below shows the plan for step 4 (which occupies a  
total of 9 steps) :  
• Pressing any other keys after the SHIFT key cancels the shift  
functionand sendsthenormalcodeassociated withtherespective  
key.  
• The input selector does not change during this operation.  
• If you press VIDEO or AUDIO key more than 3 seconds after  
pressing the SHIFT key, the input selector changes together with  
the operation mode.  
1
2
3
4
TV + SHIFT + POWER  
FUNCTION SHIFT + 4  
VIDEO + VIDEO  
3 steps  
2 steps  
2 steps  
2 steps  
SHIFT + POWER  
Total  
9 steps  
• If you attempt to store more than 20 steps, the remote will output  
one long blink and exit the macro programming mode.  
• Enter channel numbers (for the monitor TV, etc.) exactly as you  
would using the original remote.  
3Execute the desired operations.  
• See "Remote operation of other components" for a list of keys  
available with each component.  
RC$  
Press and hold the MACRO key until the backlight flashes  
twice.  
2
3
The operation mode remains set at the component specified in  
step 2.  
To return control to the original component, press SHIFT and  
then press the VIDEO or AUDIO key to return to the original  
control mode.  
Perform each of the following steps within 5 seconds.  
Press the VIDEO, AUDIO, or TV key to select the macro  
location. (MACRO1, 2, and 3 respectively)  
• You can store up to 3 different macros, one at each key:  
VIDEO = "MACRO 1", AUDIO = "MACRO 2", TV = "MACRO 3"  
• The backlight flashes once when you select the macro location.  
• Pressing a key other than VIDEO, AUDIO, or TV cancels the macro  
program mode.  
When VIDEO is pressed  
SP  
A
L
R
SW  
RmeCntrol  
M
ACRO1  
Continued to next page  
 
Getting the most from your remote control  
RC-R0507 (En/T)  
Setup code correlation  
6
Press the keys to be operated in order.  
4
VIDEO, AUDIO, TV  
EXAMPLE:  
This example shows you how to create a macro that; turns on the TV,  
sets the TV to the appropriate input, selects the receiver's input  
selector to LD, and turns on the LD player. All you have to do is insert  
the laser disc!  
1-0  
1 Press TV > SHIFT > POWER to turn on the TV.  
ENT  
2 Press FUNCTION SHIFT > "4" (TV / SAT. / VIDEO) to set the TV  
Deleting a setup code  
to the appropriate video input.  
Perform each step within 5 seconds.  
3 Press VIDEO twice to select the LD player registered at  
1 Hold down the ENT key until the backlight flashes twice.  
• At this time all inputs become available regardless of any earlier  
registration.  
VIDEO 2.  
4 Press SHIFT and POWER to turn on the LD player.  
2 Select the component to be deleted.  
Press the VIDEO, AUDIO, or TV key repeatedly to select the  
desired component.  
• Example 1 : To delete the registration of the component connected  
to the VIDEO 1 jacks, select "VIDEO 1".  
• In order to allow verification of the remote control mode, the name  
of the selected input appears in the receiver's display when the  
VIDEO, AUDIO or TV key is pressed. When the VIDEO or AUDIO  
key is pressed the receiver's input also changes.  
5Press the MACRO key so that the backlight flashes twice.  
3 Enter the 3 digit code "991".  
• The macro is stored at the locations specified in step 3. If another  
macro was previously stored at the same location, it is erased.  
Repeat steps 1 through 5 to program up to 3 macros.  
4 Hold down the ENT key until the backlight flashes twice.  
• To resume all of the factory settings, proceed step 1, then enter  
981”.  
This completes the macro programming procedure.  
Checking a setup code  
Perform each step within 5 seconds.  
Executing an automatic operation  
1 Hold down the ENT key until the backlight flashes twice.  
MACRO  
2 Select the component with setup code you want to check.  
Press the VIDEO, AUDIO, or TV key repeatedly to select the  
desired component.  
VIDEO, AUDIO, TV  
3 Enter the 3 digit code "990".  
• The backlight flashes twice immediately after the "0" is input to  
confirm input.  
4 Press the 1 key and count the number of times the backlight  
blinks. This is the first number of the 4 digit setup code.  
• If the backlight does not blink, the first digit in the setup code is 0.  
1Press the MACRO key.  
Go to step 2 within 3 seconds.  
5 Press the 2 key and count the number of times the backlight  
blinks. This is the second number of the 4 digit setup code.  
• If the backlight does not blink, the second digit in the setup code  
is 0.  
Press the VIDEO, AUDIO or TV key to execute the corre-  
2sponding macro play.  
6 Press the 3 key and count the number of times the backlight  
blinks. This is the third number of the 4 digit setup code.  
• "MACRO" appears in the front panel and the pre-programmed  
macro is performed:  
• If the backlight does not blink, the third digit in the setup code is 0.  
VIDEO = "MACRO 1", AUDIO = "MACRO 2", TV = "MACRO 3"  
• Some devices take up to 1 second to power on. The macro function  
has an automatic delay after any power function output.  
• Pressing a key other than AUDIO, VIDEO, or TV cancels the macro  
program mode.  
7 Press the 4 key and count the number of times the backlight  
blinks. This is the fourth number of the 4 digit setup code.  
• If the backlight does not blink, the fourth digit in the setup code is  
0.  
RemCntrol  
When VIDEO is pressed  
SP  
A
L
R
SW  
M
ACRO1  
 
Setup code chart  
RC-R0507 (En/T)  
Non-IR codes  
7
CD player  
Cassette deck  
LD player  
Phono  
8900  
7900  
5900  
0900  
Satellite  
TV  
2900  
1900  
4900  
DVD  
MD  
6900  
9900  
VCR  
VCR Setup codes  
Maker  
Aiwa  
Akai  
Setup codes  
4000  
Maker  
Setup codes  
Maker  
Setup codes  
Grundig  
4006, 4007, 4072,  
4081, 4195, 4207,  
4226, 4347  
Palladium  
4006, 4037, 4041,  
4072  
4041, 4106, 4315  
4072  
Panasonic  
Pathe Marconi  
Pentax  
Perdio  
4162, 4226, 4227  
4041  
Akiba  
Alba  
Hanseatic  
HCM  
4037  
4020, 4072, 4209,  
4278, 4315  
4072  
4042  
4000  
Hinari  
4004, 4072, 4240  
Ambassador  
Amstrad  
Anitech  
ASA  
4020  
Hitachi  
4000, 4004, 4041,  
4042, 4166, 4240  
4000, 4278  
4072  
Philips  
4081  
Phonola  
Pioneer  
Portland  
Profex  
4081  
Hypson  
Imperial  
Ingersol  
Interfunk  
ITT  
4072  
4000  
4004  
4081  
4037, 4081  
4037  
4000, 4041, 4104  
4020, 4072, 4278  
4067, 4081  
4020  
Asuka  
Baird  
4322  
Basic Line  
Blaupunkt  
Proline  
Pye  
4000  
4081  
4041, 4046, 4104,  
4106, 4240  
4006, 4034, 4162,  
4195, 4226, 4227  
Quartz  
4046  
ITV  
4037, 4278  
4041, 4067, 4207  
4072  
Brandt  
Brandt Electronic  
Bush  
4187, 4321  
4041  
Quelle  
4081  
JVC  
Radiola  
Rex  
4081  
Kaisui  
Kendo  
Kenwood  
Korpel  
Lenco  
Leyco  
Loewe  
4072, 4209, 4278  
4020  
4041  
4106, 4209  
4041  
4072  
Catron  
Roadstar  
4037, 4072, 4240,  
4278  
CGE  
4000  
Cimline  
Clatronic  
Condor  
Crown  
4072  
Saba  
4041, 4207, 4321  
4004, 4209  
4043, 4046, 4106  
4240, 4432  
4041, 4067  
4046, 4104  
4081  
4278  
4020  
Saisho  
Salora  
4072  
4020  
4004, 4006, 4037,  
4081  
4004, 4240  
4020, 4072, 4278  
4020, 4278  
4072  
Samsung  
Sansui  
Sanyo  
Daewoo  
Dansai  
De Graaf  
Decca  
Logik  
Luxor  
4043, 4046, 4048,  
4104, 4106  
4042, 4166  
4000, 4081  
4041  
SBR  
Schaub Lorenz  
Schneider  
SEG  
4000, 4041, 4104  
4000, 4072, 4081  
4240, 4322  
4004, 4081  
4041  
M Electronic  
Manesth  
Marantz  
4000  
Dual  
4045, 4072  
4006, 4081  
4004, 4209  
Dumont  
Elcatech  
ESC  
4000, 4081, 4104  
4072  
SEI  
Matsui  
4240, 4278  
4041, 4321  
4000  
Seleco  
Sentra  
Sharp  
Memorex  
4000, 4037, 4046,  
4104  
Ferguson  
Fidelity  
Finlandia  
Finlux  
4020  
Memphis  
Metz  
4072  
4006, 4162, 4195,  
4227, 4347  
4048  
4081, 4104  
Shintom  
Shorai  
4072, 4104  
4004  
4000, 4042, 4081,  
4104  
Minerva  
Mitsubishi  
Multitech  
Murphy  
NEC  
4006, 4195  
4043, 4067, 4081  
4000, 4072  
4000  
Siemens  
4006, 4037, 4081,  
4104, 4195  
Firstline  
4037, 4043, 4045,  
4072, 4209  
Silva  
4037  
Fisher  
Frontech  
Funai  
4046, 4104  
4020  
Singer  
Sinudyne  
Solavox  
Sontec  
Sony  
Sunstar  
Suntronic  
Tashiko  
Tatung  
Tec  
4045  
4041, 4067  
4081  
4004, 4081  
4020  
4000  
Neckermann  
Nesco  
GEC  
4081  
4072  
4037  
General  
GoldHand  
GoldStar  
Goodmans  
4020  
Nokia  
4041, 4046, 4048,  
4104, 4106, 4240  
4032, 4033, 4034  
4000  
4072  
Nordmende  
Oceanic  
Okano  
4041, 4321  
4000, 4041  
4315  
4037, 4225  
4000  
4000, 4020, 4037,  
4072, 4278  
4000  
4000, 4041, 4081  
4020  
RmeCntrol  
Graetz  
4041, 4104, 4240  
4046, 4081, 4104  
4000, 4037, 4072  
Orion  
4004, 4209  
4000, 4037, 4072  
4081  
Granada  
Grandin  
Osaki  
Technics  
4162, 4226  
Otto Versand  
 
Setup code chart  
RC-R0507 (En/T)  
VCR Setup codes (continued)  
8
Maker  
Setup codes  
Maker  
Thorn  
Setup codes  
Maker  
Setup codes  
Teleavia  
Telefunken  
Tenosal  
Tensai  
4041  
4041, 4104  
Universum  
4000, 4006, 4037,  
4081, 4106, 4195,  
4240  
4041, 4187, 4321  
4072  
Toshiba  
4041, 4043, 4045,  
4081  
Yamishi  
Yokan  
Yoko  
4072  
Towada  
Uher  
4322  
4240  
4000, 4322  
4041  
4072  
4020, 4240  
Thomson  
TV Setup codes  
Maker  
Acura  
Admiral  
Adyson  
Akai  
Setup codes  
1009  
Maker  
CS Electronics  
CTC  
Setup codes  
1216  
Maker  
Hisawa  
Hitachi  
Setup codes  
1282  
1163  
1247  
1109, 1163, 1217,  
1225, 1349  
1217  
Cybertron  
Daewoo  
Dainichi  
Dansai  
Dayton  
De Graaf  
Decca  
Dixi  
1218  
Huanyu  
Hypson  
ICE  
1216, 1374  
1037, 1264, 1282  
1217, 1264, 1371  
1218  
1208, 1361  
1218, 1264  
1009, 1037, 1374  
1218  
Akura  
Alba  
1009, 1037, 1218,  
1371  
1037  
ICeS  
1009  
Allorgan  
Amplivision  
Amstrad  
Anitech  
Arcam  
1294  
Imperial  
Indiana  
Ingelen  
Inno Hit  
Interfunk  
1247, 1370  
1037  
1163  
1208  
1217  
1009, 1371  
1009  
1037, 1072  
1009, 1037  
1519  
1072  
Dual  
1216, 1217  
1218  
1037, 1163, 1247,  
1361, 1512  
Dual Tec  
Dumont  
Elin  
1217  
Asuka  
1070  
Intervision  
1037, 1102, 1217,  
1264  
Atlantic  
Audiosonic  
Autovox  
Baird  
1206  
1037  
1037, 1109  
1206  
1343  
Elite  
1218, 1320  
1009  
Isukai  
ITS  
1218  
Elta  
1371  
Emerson  
Erres  
Expert  
Ferguson  
1361  
ITT  
1163, 1361  
1053, 1094, 1371  
Barco  
1410, 1479  
1009, 1218  
1037  
1206  
JVC  
Basic Line  
Baur  
Kaisui  
1009, 1216, 1217,  
1218, 1282  
1010, 1037, 1349,  
1361, 1512  
1370  
1037  
1217  
1037, 1109, 1238,  
1287, 1335, 1343  
Kapsch  
Kendo  
1163, 1206  
1037  
Beko  
Fidelity  
Finlandia  
Finlux  
1216, 1361  
Beon  
1208, 1359  
1037, 1070, 1072  
Kenwood  
Kingsley  
Korpel  
1313  
Binatone  
Blaupunkt  
1216  
1037  
1191, 1195, 1200,  
1327, 1328  
1218  
Firstline  
1009, 1216, 1217,  
1247, 1294, 1321  
Koyoda  
Leyco  
1009  
Blue Sky  
Blue Star  
Bondstec  
Boots  
Fisher  
1208, 1217, 1370  
1037, 1320  
1163, 1247, 1264  
1072, 1206  
1037, 1072, 1264,  
1294  
1282  
Formenti  
Frontech  
Fujitsu  
1247  
Liesenk & Tter  
Loewe  
1037  
1075, 1289, 1512  
1206  
1217  
BPL  
1282  
Funai  
1264, 1294  
Luma  
Brandt  
Britannia  
BSR  
1109, 1335  
1216  
1294  
GEC  
1037, 1072, 1217  
1009  
Luxor  
1349, 1361  
Geloso  
Genexxa  
GoldStar  
Goodmans  
M Electronic  
1009, 1037, 1109,  
1163, 1217, 1287,  
1374  
1163, 1218  
BTC  
1218  
1037, 1109, 1217  
Bush  
1009, 1037, 1218,  
1282, 1294, 1349,  
1371, 1374, 1519  
Magnadyne  
Magnafon  
Manesth  
Marantz  
Mark  
1102, 1247  
1102  
1037, 1072, 1217,  
1317, 1343, 1371,  
1374  
1217, 1264, 1320  
1037  
1037  
Cascade  
Cathay  
Centurion  
CGE  
1009  
Gorenje  
GPM  
1370  
1037  
1218  
1037  
Graetz  
Granada  
1163, 1361  
Matsui  
1009, 1011, 1035,  
1037, 1072, 1208,  
1217, 1294, 1371  
RemCntrol  
1247  
1037, 1072, 1208,  
1217, 1359  
Cimline  
Clarivox  
Clatronic  
Condor  
Contec  
Crown  
1009  
1037  
Grandin  
Grundig  
Hanseatic  
HCM  
1282  
Mediator  
Memorex  
Minerva  
Mitsubishi  
Mivar  
1037  
1247, 1370  
1320, 1370  
1009, 1216  
1009, 1037, 1370  
1070, 1191, 1195  
1037, 1320, 1361  
1009, 1282  
1009  
1070  
1108, 1512  
1216, 1313  
Hinari  
1009, 1037, 1218  
 
Setup code chart  
RC-R0507 (En/T)  
TV Setup codes (continued)  
9
Maker  
Setup codes  
Maker  
Rediffusion  
Revox  
Setup codes  
1361  
Maker  
Stern  
Setup codes  
1163, 1206  
1294, 1321  
1218  
MTC  
1349, 1512  
Multitech  
Neckermann  
NEI  
1009, 1102, 1216  
1037, 1191, 1349  
1037  
1037  
Sunkai  
Susumu  
Sysline  
Tandy  
Rex  
1163, 1206, 1264  
1009, 1218, 1264  
Roadstar  
Saba  
1037  
Nikkai  
1035, 1037, 1072,  
1216, 1218, 1264  
1075, 1109, 1163,  
1287, 1335, 1343  
1072, 1163, 1217,  
1218  
Nobliko  
Nokia  
1102  
Saccs  
Saisho  
Salora  
1238  
Tashiko  
Tatung  
1217, 1359  
1037, 1072, 1217  
1217, 1247  
1320  
1361  
1009, 1011, 1264  
Nordmende  
Oceanic  
Orion  
1109, 1287, 1343  
1163, 1361  
1163, 1349, 1359,  
1361  
Tec  
Technema  
Technics  
Teleavia  
Telefunken  
Telemeister  
Teletech  
Teleton  
Sambers  
Samsung  
1102  
1037, 1294, 1320,  
1321  
1250  
1343  
1009, 1037, 1090,  
1217, 1264, 1370  
Osaki  
1072, 1217, 1218,  
1264  
1109, 1335, 1343  
1320  
Sandra  
Sanyo  
1216  
Oso  
Osume  
Otake  
1218  
1072, 1157  
1317  
1011, 1072, 1157,  
1208  
1009  
1206, 1217, 1349  
SBR  
1037  
1361  
Tensai  
1218, 1294, 1317,  
1320  
Schaub Lorenz  
Schneider  
Otto Versand  
1010, 1037, 1191,  
1217, 1320, 1343,  
1349, 1512  
1037, 1218, 1247,  
1371, 1394  
Texet  
1216, 1218  
Thomson  
1109, 1287, 1343,  
1349  
1035, 1037, 1072,  
1361, 1512  
Palladium  
Panama  
1370  
SEG  
1217, 1264  
1102, 1294  
1010  
1217, 1264  
SEI  
Thorn  
Panasonic  
1126, 1163, 1226,  
1250  
Sei-Sinudyne  
Seleco  
Sentra  
Sharp  
1163, 1206  
1035  
1093, 1491  
1294  
Thorn-Ferguson  
Tomashi  
Toshiba  
1343  
Pathe Cinema  
Pausa  
1216, 1238, 1320  
1009  
1282  
1035, 1070  
1206, 1320  
1102  
Perdio  
1320  
Shorai  
Siarem  
Siemens  
Uher  
Philco  
1247  
1102  
Ultravox  
Universum  
Vestel  
Philips  
1037, 1374  
1037  
1109, 1163, 1287  
1009, 1361  
1321  
1037, 1157, 1191,  
1195, 1200, 1327,  
1328  
1037, 1264, 1370  
1037  
Phonola  
Pioneer  
Profex  
Videosat  
Videotechnic  
Vision  
1247  
Sinudyne  
Solavox  
Sonitron  
Sonoko  
Sonolor  
Sontec  
1102, 1294  
1163  
1217  
Proline  
1320  
1208  
Protech  
1009, 1037, 1102,  
1217, 1247, 1264  
1010, 1011, 1037,  
1070, 1200, 1327,  
1328, 1361, 1512  
1037  
1037  
1070  
Voxson  
Waltham  
Watson  
1163  
1217  
1009, 1037  
1163, 1208  
1037  
Quelle  
1037, 1320  
1102  
Watt Radio  
Sony  
1010, 1011  
1037  
R-Line  
Radiola  
RBM  
White Westinghouse 1037, 1216, 1320  
Soundwave  
Standard  
Yoko  
1037, 1217, 1264  
1206  
1009, 1217, 1218  
Zanussi  
Satellite Setup codes  
Maker  
Akai  
Setup codes  
Maker  
Setup codes  
2396  
Maker  
Crown  
Cyrus  
Setup codes  
2243  
2515  
Avalon  
Alba  
2362, 2421, 2455,  
2515  
Axis  
2369  
2200  
Best  
2369  
DDC  
2362  
Aldes  
Amstrad  
2288  
2080, 2252, 2345,  
2461  
Blaupunkt  
Boca  
2173  
DNT  
2200, 2396  
2396  
2243, 2513  
2515  
2067  
Echostar  
Emanon  
Ferguson  
Fidelity  
Finlux  
BT  
Bush  
2421  
2067, 2183, 2336  
2252  
Ankaro  
Anttron  
Armstrong  
AST  
2220, 2288, 2369  
2183, 2421  
2243  
Cambridge  
Channel Master  
Commlink  
Connexions  
Conrad  
2344, 2515  
2362  
2108, 2344, 2455  
2421  
2351  
2288  
Freecom  
Fuba  
RmeCntrol  
Astra  
2108  
2396  
2369, 2396, 2421  
2183  
Astro  
2173  
2607  
G-Sat  
 
Setupcode chart  
RC-R0507 (En/T)  
Satellite Setup codes (continued)  
10  
Maker  
Setup codes  
2288  
Maker  
Setup codes  
2243  
Maker  
Setup codes  
2455  
Galaxis  
Gooding  
Grundig  
Hinari  
Mediamarkt  
Minerva  
Morgan’s  
Newhaus  
Nikko  
Sabre  
2571  
2571  
Salora  
2108  
2173, 2571, 2750  
2183  
2243, 2513  
2220  
2360  
SAT  
2351, 2461  
2183  
Satec  
Hirschmann  
Hitachi  
Huth  
Intervision  
ITT  
2173, 2573  
2455  
SatPartner  
Schwaiger  
Seemann  
SEG  
2421  
Nokia  
2108, 2455, 2573  
2362  
2183, 2504  
2396  
2369, 2421  
2173  
2220, 2243, 2288  
2592  
Nordmende  
Orbitech  
Oxford  
2501  
2108  
2344  
Siemens  
Skymaster  
Sunstar  
Tantec  
JVC  
2515, 2571  
Pace  
2067, 2183, 2336,  
2455, 2791  
2288, 2628  
2513  
Kathrein  
2092, 2173, 2200,  
2442, 2504, 2622,  
2658  
Palladium  
Palsat  
2571  
2501  
2455  
2336, 2455  
2262, 2501  
2421  
TechniSat  
Telefunken  
Teleka  
Kreiselmeyer  
Kyostar  
La Sat  
2173  
Panda  
2421  
Philips  
2200, 2292, 2455,  
2571, 2750  
2243  
2513, 2607  
2421  
Thomson  
Triad  
2455  
Lenco  
Phonotrend  
Promax  
Prosat  
2288, 2592  
2455  
2351  
Lennox  
Lupus  
2592  
Universum  
Ventana  
Vortec  
2173, 2571  
2200  
2369  
2288  
Luxor  
2108, 2573  
2455, 2592  
2200  
Quadral  
Radiola  
Radix  
2362, 2628  
2200  
2396  
2421  
Manhattan  
Marantz  
Maspro  
Matsui  
Vtech  
Wisi  
2351  
2173, 2351, 2372,  
2396, 2455, 2638  
2092, 2336, 2750  
2344, 2571  
RFT  
2200, 2220, 2288  
2336  
Saba  
LD player Setup codes  
Maker  
Pioneer  
Radiola  
Salora  
Setup codes  
5059  
5388  
Maker  
Setup codes  
5258  
Maker  
Setup codes  
5193, 5201  
5059  
Kenwood  
Marantz  
Philips  
Sony  
5064, 5194  
5064, 5194, 5388  
Telefunken  
5064  
CD player Setup codes  
Maker  
Setup codes  
8157  
Maker  
Akai  
Setup codes  
8156  
Maker  
Setup codes  
8157  
Linn  
Quad  
Luxman  
Marantz  
Matsui  
8589, 8778  
8029, 8157  
8157, 8288  
8029  
Alba  
8288, 8603, 8615  
8603  
Quasar  
Radiotone  
Revox  
8029  
Amstrad  
Arcam  
AudioTon  
Bush  
8615  
8157  
8157  
MCS  
8157  
Rotel  
8157  
Memorex  
Meridian  
Micromega  
Mitsubishi  
NAD  
8032  
8615  
Schneider  
Sharp  
8134, 8615  
8037  
8157  
California Audio Lab 8029  
8157  
Condor  
Cyrus  
8134  
Sony  
8000  
8156  
8157  
Technics  
Toshiba  
Universum  
Watson  
Yamaha  
8029, 8303  
8481, 8692  
8157  
8000  
Denon  
Fisher  
8003, 8034  
8048  
Naim  
8157  
RemCntrol  
Onkyo  
8101  
Grundig  
JVC  
8157  
8615  
Panasonic  
Philips  
8029, 8303, 8367  
8157  
8072  
8036, 8187  
Kenwood  
8028, 8190, 8523,  
8692  
Pioneer  
8032  
 
Setup code chart  
RC-R0507 (En/T)  
Cassete deck Setup codes  
11  
Maker  
Setup codes  
7135, 7136  
7229  
Maker  
Sharp  
Setup codes  
7205  
Maker  
Setup codes  
Grundig  
Kenwood  
7029  
Onkyo  
Panasonic  
Philips  
Sony  
7170, 7243  
7229  
7071, 7092, 7183,  
7205, 7233, 7234  
7029  
Technics  
Yamaha  
Marantz  
Memorex  
7029  
7099  
Pioneer  
Revox  
7027, 7099  
7029  
7205  
Cable Setup codes  
Maker  
Setup codes  
Maker  
Setup codes  
0105  
0423  
Maker  
Setup codes  
0003  
PVP Stereo Visual Matrix 0003  
British Telecom  
Decsat  
United Cable  
Westminster  
Scientific Atlanta  
0008, 0277  
0105  
Jerrold  
0003, 0276  
DAT deck Setup codes  
Maker  
Marantz  
Philips  
Setup codes  
7158  
Maker  
Setup codes  
7158  
7216, 7252  
Maker  
Sony  
Setup codes  
7093  
Grundig  
Kenwood  
7158  
Technics  
7158  
MD deck Setup codes  
Maker  
Kenwood  
Sony  
Setup codes  
9826  
9000, 9490  
DVD deck Setup codes  
Maker  
Philips  
Toshiba  
Setup codes  
6539  
Maker  
Setup codes  
6534  
Kenwood  
Panasonic  
6503  
6490  
Misc. audio Setup codes  
Maker  
Setup codes  
Jerrold  
8459, 8520  
8460  
Scientific Atlanta  
Starcom  
8459  
RmeCntrol  
 
RC-R0507 (En/T)  
12  
RemCntrol  
 
In case of difficulty  
RC-R0507 (En/T)  
Remote control unit  
13  
Symptom  
Cause  
Remedy  
The backlight flashes five times during nor-  
mal operation.  
• The batteries are nearing exhaustion.  
• Replace with new batteries to preserve the  
currently registered setup information.  
Subwoofer volume cannot be adjusted.  
• Subwoofer is OFF.  
• Turn the subwoofer ON.  
Certain inputs cannot be selected using the  
remote control.  
• No Setup codes registered at for the respec- • Register a Setup code or Non-IR code at the  
tive input(s). respective input(s). RC3  
Remote control operation is not possible.  
• The remote control is set to a different opera- • Press VIDEO, AUDIO, or TV to select the  
tion mode.  
• Batteries are exhausted.  
approriate operation mode.  
• Replace with new batteries.  
• The remote control unit is too far away from the • Operate the remote control unit within the  
main system, controlling angle is too large, or  
there is an obstacle between the receiver and  
the remote.  
controllable range.  
• The audio cords and system control cords are • Connect properly referring to “Setting up the  
not connected properly. system”.  
• No software is loaded in the source compo- • Place software in the source component you  
nent. want to play.  
• An attempt is made to play a tape which is • Wait until recording has completed.  
being recorded in the cassette deck.  
• The remote control has not been set to the • Press the VIDEO, AUDIO, or TV key to activate  
operation mode for the component you wish to  
control.  
the operation mode for the component you  
want to control before operation.  
RC5  
• The microprocessor of the remote control • Reset the microprocessor.  
malfunctions.  
RC6  
The “MONITOR” indicator appears when  
pressing the VIDEO key.  
• VIDEO2/MONITOR is set to “MONITOR”.  
• When the “MONITOR” indicator is displayed,  
delete the preset code. RC6  
RmeCntrol  
 
Remote operation of other components  
RC-R0507 (En/T)  
Refer to the following for the type of remote control operations available for each component.  
The setup code for each component must be entered beforehand. RC3  
14  
• When pressing keys in succession, press each key firmly and be sure  
to wait at least 1 second before pressing the next key.  
• Numeric keys function the same as the numeric keys on the original  
remote.  
• To execute a FUNCTION SHIFT command, press the FUNCTION  
SHIFT key, then press the corresponding key within 3 seconds.  
1 Use the AUDIO, VIDEO, or TV keys to select the component  
you want to control.  
2 Press the keys corresponding to the operations you desire.  
Refer to the following sections for details.  
Note  
1. Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes  
may only operate some of the functions available on a given model.)  
2. The charts below show the typical functions available for each component. Some manufacturers use different key combinations to perform similar  
functions. For that reason, we have programmed extra functions on some of the unused number keys to help you control your equipment. To find  
if your component has extra functions, press the FUNCTION SHIFT key, then press a number key. Repeat this procedure for each number key.  
Tuner operations  
Cassette deck operations  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
8
TUNING/SKIP  
P. CALL  
TUNING/SKIP  
8
P. CALL  
P. CALL  
P. CALL  
1
2
3
TV/SAT/VID  
INFO  
ALT AUD  
BAND  
BAND  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
6
¢
4
6
¢
7
7
DISPLAY  
0
+ (3 Play)  
– (2 Play)  
TUNING  
6 (BAND)  
7 (AUTO)  
4 (P.CALL –)  
¢ (P.CALL +)  
FUNCTION SHIFT commands  
6 (3 Play)  
REC  
DISPLAY (Dimmer)  
8 (Pause)  
7 (Stop)  
4 (1 Rewind)  
¢ (¡ Fast forward)  
(Record)  
CD player operations  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
8
TUNING/SKIP  
P. CALL  
P. CALL  
1
2
3
1
2
3
TV/SAT/VID  
INFO  
ALT AUD  
TV/SAT/VID  
INFO  
ALT AUD  
BAND  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
6
¢
7
DISPLAY  
0
DISPLAY  
0
+10  
ENT  
+ (Disc Skip +)  
– (Disc Skip –)  
Numeric keys  
FUNCTION SHIFT commands  
REPEAT (Repeat)  
6 (Play/Pause {for SL16})  
6 (3 Play {for other})  
8 (Pause {for other})  
7 (Stop)  
RANDOM (Random)  
4 (Skip)  
¢ (Skip)  
MD recorder operations  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
TUNING/SKIP  
8
1
2
3
1
2
3
P. CALL  
P. CALL  
TV/SAT/VID  
INFO  
ALT AUD  
TV/SAT/VID  
INFO  
ALT AUD  
BAND  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
6
¢
RemCntrol  
DISPLAY  
0
DISPLAY  
0
7
+10  
ENT  
+ (¡ Search)  
– (1 Search)  
6 (3 Play)  
8 (Pause)  
Numeric keys  
FUNCTION SHIFT commands  
+100 (+100)  
7 (Stop)  
REPEAT (Repeat)  
RANDOM (Random)  
4 (Skip back)  
¢ (Skip forward)  
 
Remote operation of other components  
RC-R0507 (En/T)  
TV operations  
FUNCTION  
SHIFT  
15  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
1
2
3
1
2
3
8
TUNING/SKIP  
P. CALL  
P. CALL  
TV/SAT/VID  
INFO  
ALT AUD  
TV/SAT/VID  
INFO  
ALT AUD  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
BAND  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
6
¢
DISPLAY  
0
DISPLAY  
0
7
+10  
ENT  
+ (Channel +)  
– (Channel –)  
6 (Mute)  
Numeric keys  
FUNCTION SHIFT commands  
TV/SAT./VID (Input selector)  
ALT AUDIO (Alternate audio)  
+100 (TV TEXT)  
8 (Volume +)  
7 (Volume –)  
REPEAT (Text off)  
RANDOM (MIX)  
VCR operations  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
REC  
1
2
3
1
2
3
8
P. CALL  
P. CALL  
TUNING/SKIP  
TV/SAT/VID  
INFO  
ALT AUD  
TV/SAT/VID  
INFO  
ALT AUD  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
BAND  
4
6
¢
(Record)  
DISPLAY  
0
DISPLAY  
0
GUIDE  
7
+10  
ENT  
Numeric keys  
+ (Channel +)  
– (Channel –)  
6 (3 Play)  
FUNCTION SHIFT commands  
TV/SAT./VID (Input selector)  
(OSD menu)  
8 (Pause)  
7 (Stop)  
4 (1 Rewind)  
¢ (¡ Fast forward)  
LD player operations  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
1
2
3
1
2
3
8
P. CALL  
P. CALL  
TUNING/SKIP  
TV/SAT/VID  
INFO  
ALT AUD  
TV/SAT/VID  
INFO  
ALT AUD  
GUIDE  
BAND  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
6
¢
DISPLAY  
0
DISPLAY  
0
(OSD menu)  
7
+10  
ENT  
FUNCTION SHIFT commands  
INFO (Frame- time)  
+ (A, A/B)  
– (B)  
6 (3 Play)  
8 (Pause)  
Numeric keys  
REPEAT (Repeat)  
RANDOM (Random)  
DISPLAY (Display)  
7 (Stop)  
4 (Skip back)  
¢ (Skip forward)  
Satellite tuner operations  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
1
2
3
1
2
3
GUIDE  
TV/SAT/VID  
INFO  
ALT AUD  
8
TV/SAT/VID  
INFO  
ALT AUD  
P. CALL  
P. CALL  
TUNING/SKIP  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
BAND  
4
6
¢
(OSD menu)  
DISPLAY  
0
DISPLAY  
0
+10  
ENT  
7
Numeric keys  
6 (Select)  
8 (»)  
FUNCTION SHIFT commands  
TV/SAT./VID (Input selector)  
ALT AUDIO (Alternate audio)  
+100 (+100)  
+ (Channel +)  
– (Channel –)  
7 («)  
4 (|)  
¢ (\)  
RmeCntrol  
 
Remote operation of other components  
RC-R0507 (En/T)  
Cable tuner operations  
FUNCTION  
SHIFT  
16  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
1
2
3
1
2
3
TUNING/SKIP  
P. CALL  
8
GUIDE  
P. CALL  
TV/SAT/VID  
INFO  
ALT AUD  
TV/SAT/VID  
INFO  
ALT AUD  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
BAND  
4
6
¢
(OSD menu)  
DISPLAY  
0
DISPLAY  
0
7
+10  
ENT  
Numeric keys  
+ (Channel +)  
– (Channel –)  
6 (Select)  
8 (»)  
FUNCTION SHIFT commands  
MENU (Menu)  
THEME (Theme)  
FAV. (Favorite)  
TV/SAT./VID (Input selector)  
INFO (Page)  
7 («)  
4 (|)  
¢ (\)  
ALT AUDIO (Alternate audio)  
+100 (+100)  
DVD player operations  
FUNCTION  
SHIFT  
MENU  
THEME  
FAV  
MENU  
THEME  
FAV  
REC  
1
2
3
1
2
3
8
P. CALL  
P. CALL  
TUNING/SKIP  
TV/SAT/VID  
INFO  
ALT AUD  
TV/SAT/VID  
INFO  
ALT AUD  
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
4
+100  
7
5
REPEAT  
8
6
RANDOM  
9
BAND  
4
6
¢
(Record)  
DISPLAY  
0
DISPLAY  
0
GUIDE  
7
+10  
ENT  
Numeric keys  
+ (Disc skip +) 6 (3 Play)  
FUNCTION SHIFT commands  
ALT AUDIO (Alternate audio)  
+100 (+100)  
(OSD menu)  
– (Disc skip –)  
8 (Pause)  
7 (Stop)  
4 (Skip back)  
¢ (Skip forward)  
REPEAT (Repeat)  
RANDOM (Random)  
DISPLAY (Display)  
RemCntrol  
 

Indesit Freezer IN ES 1211 UK User Manual
Jens of Sweden MP3 Player MP X User Manual
Juniper Networks Network Router J4300 User Manual
JVC Camcorder Accessories WR DV1U User Manual
JVC DVD VCR Combo HR XV1EU User Manual
JVC Home Safety Product KT SR1000 User Manual
JVC Portable CD Player RA P50W User Manual
JVC Universal Remote CH X1000 User Manual
JVC VCR HR A630EK User Manual
Keys Fitness Home Gym ST VDB User Manual