Kodak Photo Printer 4J5912 User Manual

KODAK Photo Printer Visual  
Calibration Utility  
User Manual  
Part No. 4J5912  
 
Table of Contents  
June 20, 2007 - 4J5912  
i
 
 
Calibrating the Printer  
The KODAK Photo Printer Visual Calibration Utility (Calibration Utility) lets  
your Kodak printer produce the best possible color response. Calibration  
adjusts the response of the printer so that a specific data input value yields a  
specific color density output.  
The printer is shipped with default factory calibration values. You can set up  
your printer and print right away without having to calibrate the printer.  
However, if you are dissatisfied with the color of your prints, follow the steps  
in this chapter to calibrate your printer.  
Installing the Calibration Utility  
IMPORTANT: You must have the printer driver installed to use the  
Calibration Utility.  
1. Download the KODAK Photo Printer Visual Calibration Utility from the  
2. Double-click the installer file.  
3. Follow the on-screen instructions to install the calibration utility.  
June 20, 2007 - 4J5912  
1
 
 
Calibrating the Printer  
Launching the Calibration Utility  
From the WINDOWS  
Printer Driver  
1. For your operating system, do the following:  
WINDOWS VISTA WINDOWS XP  
SelectStart>ControlPanel>Hardware Select Start>Printers and  
and Sound>Printer.  
Faxes.  
2. Click KODAK Photo Printer.  
3. Select File>Properties.  
4. Click the Printer Calibration tab.  
5. Click KODAK Photo Printer Visual Calibration Utility...  
The KODAK Photo Printer Visual Calibration Utility dialog box opens.  
The name of the printer and the paper installed appear in the upper  
left of the dialog box.  
2
4J5912 - June 20, 2007  
 
   
Calibrating the Printer  
From the WINDOWS  
Desktop  
1. Click Start>Programs>KODAK Photo Printer>KODAK Photo  
Printer Calibration Utility.  
NOTE: If you have more than one Kodak printer that uses the Calibration  
Utility, the following dialog box may appear.  
2. Select a printer to calibrate, and click OK.  
The KODAK Photo Printer Visual Calibration Utility dialog box opens.  
The name of the printer and the paper installed appear in the upper  
left of the dialog box.  
From the MACINTOSH 1. Double-click KODAK Visual Calibration Utility in the  
/Applications/Utilities folder.  
OS 10.4 Desktop  
NOTE: If you have more than one Kodak printer that uses the Calibration  
Utility, a Select Printer dialog box may appear.  
2. Select a printer to calibrate, and click OK.  
The KODAK Photo Printer Visual Calibration Utility dialog box opens.  
The name of the printer and the paper installed appear in the upper  
left of the dialog box.  
June 20, 2007 - 4J5912  
3
 
   
Calibrating the Printer  
Using the Calibration Utility  
Calibrate your printer whenever the color balance of the prints does not look  
right. You may also want to calibrate the printer after it has been serviced.  
IMPORTANT: Setting the printer to factory defaults returns the printer’s  
calibration to known values.  
1. Click Set Printer to Factory Defaults.  
4
4J5912 - June 20, 2007  
 
 
Calibrating the Printer  
2. Click Print Test Image.  
The printer prints the test print.  
June 20, 2007 - 4J5912  
5
 
Calibrating the Printer  
3. Examine the test print from the printer to determine the most neutral  
gray patch. Then click the patch in the Calibration Utility screen that  
corresponds with the most neutral patch on the test print.  
IMPORTANT: Only do Step 4 if you want to adjust the highlights so that  
your prints meet your personal preference. After adjusting  
the highlights, check your prints to make sure that they  
look the way you want.  
4. Move the slider to adjust the highlights.  
IMPORTANT: If you selected a patch in Step 3 or adjusted the highlights  
in Step 4, you must do Step 5.  
5. Click Update Printer Calibration.  
The calibration utility calculates a new calibration table, which is  
downloaded to the printer and updates any adjustment you made to  
the highlights.  
6. Click Print Test Image to make another test print to check the  
calibration results.  
NOTE: Do Steps 3 - 6 until patch 25 is the most neutral gray.  
6
4J5912 - June 20, 2007  
 
       
Calibrating the Printer  
Uninstalling the Calibration Utility  
WINDOWS XP  
Operating System  
1. Select Start>Settings>Control Panel>Add or Remove Programs.  
2. Select the KODAK Visual Calibration Utility.  
3. Click Remove.  
WINDOWS VISTA  
Operating System  
1. Select Start>Control Panel>Programs>Uninstall a program.  
2. Select the KODAK Visual Calibration Utility.  
3. Click Uninstall.  
MACINTOSH OS 10.4  
1. Drag the KODAK Visual Calibration Utility folder from  
/Library/Printers/Kodak to the Trash.  
2. Drag the KODAK Visual Calibration Utility alias from  
/Applications/Utilities to the Trash.  
3. Empty the Trash.  
June 20, 2007 - 4J5912  
7
 
       
 

Infinity Home Theater System Oreus HCS User Manual
Ingersoll Rand Impact Driver 215G User Manual
Intel Server S5500WB User Manual
IOGear Network Card GIC3800 User Manual
JBL Portable Speaker S2A User Manual
JL Audio Car Stereo System C2 075ct User Manual
JVC VCR HR DD865EK User Manual
KitchenAid Cooktop KECC508RPB01 User Manual
KitchenAid Range KSHS22Q User Manual
Kodak Film Camera E 6 User Manual