Kenwood Car Video System KDV U4349M User Manual

KDV-U4349  
KDV-U4349M  
KDV-U4449  
DVD-RECEIVER  
INSTRUCTION MANUAL  
© 2011 Kenwood Corporation All Rights Reserved.  
B64-4818-00/00 (MW/M2W/XW)  
Before use  
• If you experience problems during installation,  
consult your Kenwood dealer.  
• When you purchase optional accessories, check with  
your Kenwood dealer to make sure that they work  
with your model and in your area.  
• The characters which can be displayed by this unit  
are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |  
~ .  
2WARNING  
To prevent injury or fire, take the following  
precautions:  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools) inside  
the unit.  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on the  
display on the actual equipment, and some of the  
illustrations on the display may be inapplicable.  
How to reset your unit  
• If this unit or the connected unit (disc auto changer,  
etc.) fails to operate properly, press the Reset button.  
The unit returns to factory settings when the Reset  
button is pressed.  
Handling discs  
• Do not touch the recording surface of the disc.  
• Do not stick tape etc. on the disc, or use a disc with  
tape stuck on it.  
• Do not use disc type accessories.  
Reset button  
• Clean from the center of the disc and move  
outward.  
• When removing discs from this unit, pull them out  
horizontally.  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it with a  
dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off with  
a cloth moistened with neutral cleaner, then wipe it  
again with a clean soft dry cloth.  
• If the disc center hole or outside rim has burrs,  
use the disc only after removing the burrs with a  
ballpoint pen etc.  
¤
Discs that cannot be used  
• Discs that are not round cannot be used.  
Applying spray cleaner directly to the unit may affect its  
mechanical parts. Wiping the faceplate with a hard cloth or  
using a volatile liquid such as thinner or alcohol may scratch  
the surface or erases characters.  
Cleaning the Faceplate Terminals  
If the terminals on the unit or faceplate get dirty, wipe  
them with a clean soft dry cloth.  
• Discs with coloring on the recording surface or discs  
that are dirty cannot be used.  
Lens Fogging  
• This unit can only play the CDs with  
.
When you turn on the car heater in cold weather,  
dew or condensation may form on the lens in the  
DVD player of the unit. Called lens fogging, this  
condensation on the lens may not allow discs to play.  
In such a situation, remove the disc and wait for the  
condensation to evaporate. If the unit still does not  
operate normally after a while, consult your Kenwood  
dealer.  
This unit may not correctly play discs which do not  
have the mark.  
• You cannot play a disc that has not been finalized.  
(For the finalization process refer to your writing  
software, and your recorder instruction manual.)  
English  
|
3
Before use  
List of playable discs  
About Audio files  
Playable Audio file  
Disc  
types  
DVD  
Standard  
Support  
Remark  
MP3 (.mp3), WMA (.wma), Linear PCM (WAV) (.wav)  
×
DVD Video  
DVD Audio  
DVD-R  
DTS not supported.  
If music of normal CD and other playback systems are  
MP3/WMA/WAV/JPEG/  
MPEG/DivX Playback  
Multi-border/Multisession/  
(Playback depends on  
authoring conditions)  
Video mode supported  
VR mode supported (Only  
DVD-R/RW)  
recorded in the same disc, only the playback system  
recorded at the first setout is played.  
Acceptable media  
DVD-RW  
DVD+R  
CD-R/RW/ROM, DVD R/RW, mass-storage-class USB  
device, iPod with KCA-iP102  
DVD+RW  
Playable disc file format  
ISO 9660 Level 1/2, Joliet, Romeo.  
Playable USB device file system  
FAT32, FAT16  
×
DVD-R DL (Dual layer)  
DVD+R DL (Double layer)  
DVD-RAM  
Only video format  
CD  
Music CD  
CD-TEXT  
Although the audio files are complied with the standards  
listed above, the play maybe impossible depending on  
the types or conditions of media or device.  
CD-ROM  
MP3/WMA/WAV/JPEG/  
DivX playback  
Multisession supported  
Packet write not supported.  
×
×
CD-R  
Playing order of the Audio file  
CD-RW  
In the example of folder/file tree shown below, the  
files are played in the order from to .  
DTS-CD  
Video CD (VCD)  
Super video CD  
Photo CD  
():Root
×
%
<
v
: F
Folder  
vꢀ  
<
vꢀ  
CD-EXTRA  
Only music CD session can  
be played.  
Sound quality of normal  
CD music  
:
Audio file  
vꢅ  
vꢆ  
%
HDCD  
vꢅ  
vꢆ  
CCCD  
×
×
%
vꢃ  
vꢃ  
vꢈ  
v.  
Others  
DualDisc  
Super audio CD  
Only CD layer can be  
played.  
vꢈ  
v.  
: Playback is possible.  
% : Playback is partly possible.  
× : Playback is impossible.  
An online manual about audio files is put on the  
site, www.kenwood.com/audiofile/. On this online  
manual, detailed information and notes which are  
not written in this manual are provided. Make sure  
to read through the online manual as well.  
When buying DRM enabled contents, check the  
Registration Code in the <DivX registration> (page 13).  
Registration Code changes each time a file with the  
displayed Registration Code is played to protect against  
copying.  
About Video files  
Acceptable video files  
MPEG1, MPEG2, DivX  
Extensions  
mpg, mpeg, divx, div, avi  
Acceptable media  
Use of “DualDisc”  
When playing a “DualDisc” on this unit, the surface of  
the disc that is not played may be scratched while the  
disc is inserted or ejected. Since the music CD surface  
does not conform to the CD standard, playback may  
be impossible.  
CD-R/RW/ROM, DVD R/RW, mass-storage-class USB  
device, iPod with KCA-iP102  
Acceptable discs, disc formats, USB device file system,  
file and folder names and playing order are the same  
as those for audio files. See <About Audio files>.  
(A “DualDisc” is a disc with one surface containing  
DVD standard signals and the other surface  
containing music CD signals.)  
|
4
KDV-U4349/ KDV-U4349M/ KDV-U4449  
About Picture files  
About USB device  
• In this manual, the word “USB device” is used for  
flash memories and digital audio players which have  
USB terminals.  
• When the USB device is connected to this unit,  
it can be charged up provided that this unit is  
powered.  
• Install the USB device in the place where it will not  
prevent you from driving your vehicle properly.  
• You cannot connect a USB device via a USB hub and  
Multi Card Reader.  
• Take backups of the audio files used with this unit.  
The files can be erased depending on the operating  
conditions of the USB device.  
Acceptable picture files  
JPEG  
Extensions  
jpg, jpeg  
Acceptable media  
CD-R/RW/ROM, DVD R/RW, mass-storage-class USB  
device  
Acceptable discs, disc formats, USB device file system,  
file and folder names and playing order are the same  
as those for audio files. See <About Audio files>.  
iPod/iPhone that can be connected to this  
unit  
Made for  
We shall have no compensation for any damage  
arising out of erasure of the stored data.  
• iPod nano (6th generation)  
• iPod nano (5th generation)  
• iPod nano (4th generation)  
• iPod nano (3rd generation)  
• iPod nano (2nd generation)  
• iPod nano (1st generation)  
• iPod with video  
• No USB device comes with this unit. You need to  
purchase a commercially available USB device.  
• When connecting the USB device, usage of the  
CA-U1EX (option) is recommended.  
Normal playback is not guaranteed when a cable  
other than the USB compatible cable is used.  
Connecting a cable whose total length is longer  
than 5 m can result in abnormal playback.  
• iPod classic  
• iPod touch (4th generation)  
• iPod touch (3rd generation)  
• iPod touch (2nd generation)  
• iPod touch (1st generation)  
• iPhone 4  
• iPhone 3GS  
• iPhone 3G  
• iPhone  
• For the latest compatible list and software version of  
• You can control an iPod/iPhone from this unit by  
connecting an iPod/iPhone (commercial product)  
with Dock connector using an optional accessory  
iPod connection cable (KCA-iP102). The word “iPod”  
appearing in this manual indicates the iPod/iPhone  
connected with the KCA-iP102 (optional accessory).  
• By connecting your iPod/iPhone to this unit with  
an optional accessory iPod connection cable (KCA-  
iP102), you can supply power to your iPod/iPhone as  
well as charge it while playing music. However, the  
power of this unit must be on.  
• If you start playback after connecting the iPod, the  
music that has been played by the iPod is played  
first.  
• You cannot operate iPod if “KENWOOD” or “” is  
displayed on the iPod.  
• A video file stops playing if you switch to another  
source while playing it. You cannot play from the  
last playback position if you switch back to iPod.  
English  
|
5
Before use  
Region codes in the world  
The DVD players are given a region code according to the country or area it is marketed, as shown in the  
following map.  
1
5
2
1
2
1
4
5
2
4
DVD disc marks  
Operation regulatory marks  
With this DVD, some functions of this unit such as the  
play function may be restricted depending on the  
location where the DVD is playing. In this case, the  
following marks will appear on the screen. For more  
information, refer to the disc manual.  
Symbol  
Description  
Indicates a region number. The discs with this mark can  
be played with any DVD player.  
ALL  
Indicates the number of audio languages recorded. Up  
to 8 languages can be recorded in a movie. You can  
select a favorite language.  
Prohibition Mark  
8
Indicates the number of subtitled languages recorded.  
Up to 32 languages can be recorded.  
32  
If a DVD disc has scenes shot from multiple angles, you  
can select a favorite angle.  
Discs with limited period of use  
Do not leave discs with a limited period of use in this  
unit. If you load an already expired disc, you may not  
be able to remove it from this unit.  
9
Indicates the type of screen for the image. The left mark  
indicates that a wide image picture (16:9) is displayed  
on a standard TV set screen (4:3) with a black band at  
both the top and bottom of the screen (letter box).  
16:9 LB  
|
6
KDV-U4349/ KDV-U4349M/ KDV-U4449  
For first use  
Before using this unit for the first  
time  
Language Setup  
Set a language used for screen display, DVD subtitles,  
etc.  
Demonstration mode setting  
This unit is initially set on the Demonstration mode.  
When using this unit for the first time, cancel the  
Demonstration mode setting.  
• “LANGUAGE” item of the Setup menu (page 13)  
DSP Setup  
Display  
Setting  
To get clear sound, set the sound environment  
according to the location and size of physically  
installed speakers with reference to the followings:  
“DEMO ON”  
“DEMO OFF”  
The Demonstration mode function is ON.  
Cancel Demonstration mode (Normal mode).  
TV system selection  
• “MENU” > “SWPRE” of <Function Control> (page 10)  
• Cabin selection (page 27)  
• Speaker Setting (page 27)  
• DTA (Digital Time Alignment) setting (page 28)  
• X’Over setting (page 28)  
You must select the appropriate system mode for  
your TV system. When the selected system does not  
coincide with the system of your TV, normal color  
picture may not be displayed.  
Display  
“P/N PAL”  
“P/N NTSC”  
Setting  
Select when the unit is connected with PAL-TV.  
Select when the unit is connected with NTSC-TV.  
Setting “DSP SET” to “BYPASS” disables the settings related  
to the DSP function. Refer to “DSP” > “DSP SET” of <Function  
Control> (page 11).  
1 Select Standby  
Press the [SRC] button.  
Select the “STANDBY” display.  
2 Enter Function Control mode  
Press the [ ] button for at least 1 second.  
“FUNCTION” is displayed.  
3 Enter Menu mode  
Turn the [AUD] knob to select “MENU.  
Press the [AUD] knob.  
4 Set the Demonstration mode  
Turn the [AUD] knob to select “DEMO.  
Press the [AUD] knob for at least 2 seconds.  
Select the “DEMO OFF” display.  
5 Set the TV system  
Turn the [AUD] knob to select “P/N.  
Press the [4] or [¢] button.  
6 Exit Function Control mode  
Press the [ ] button for at least 1 second.  
7 Turning OFF the Power  
Press the [SRC] button for at least 1 second.  
These settings can be changed later.  
English  
|
7
Basic Operation of control panel  
[SRC]  
[FM+] [AM–]  
Disc slot  
[
]
0
Release  
USB Terminal  
4 ¢  
]
Auxiliary input  
[
]
[DISP] [AUD]  
[1] [2] [3] [4] [5] [6]  
[
] [  
General functions  
Tuner functions  
Power/Source Select button: [SRC]  
FM band: [FM+]  
Turns on the power.  
Switches between FM1, FM2, and FM3 each time the  
When the power is on, the source switches between  
Tuner (“TUNER”), USB or iPod (“USB” or “iPod”),  
DVD (“DVD”), Auxiliary input (“AUX”), and Standby  
(“STANDBY”) each time this button is pressed.  
Press at least 1 second to turn off the power.  
[FM+] button is pressed.  
AM band: [AM–]  
Switches to AM.  
Tuning: [4]/ [¢]  
Changes the frequency.  
When an optional accessory is connected, the source name  
for each device appears.  
Use the “MENU” > “AUTO1”/ “AUTO2”/ “MANUALin  
<Function Control> (page 11) to change the frequency  
switching.  
Volume control: [AUD] knob  
Turn the knob to adjust the volume.  
During reception of stereo stations the “ST” indicator is ON.  
Subwoofer output: [AM–]  
Switches between ON (“SW ON”) and OFF (“SW OFF”)  
each time this button is pressed for at least 2 seconds.  
Preset memory: [1] - [6]  
Memorizes the station selected when pressing for at  
least 2 seconds.  
Auto memory entry: [FM+]  
Memorizes 6 stations with good reception  
automatically when pressed for at least 2 seconds.  
You can do this function when “SWPRE” in <Function  
Control> (page 10) is set to “SW.  
Auxiliary input  
Connect a portable audio device with mini-plug  
cable (3.5 ø).  
Preset tuning: [1] - [6]  
Recalls the memorized station.  
Use the mini-plug cable which is stereo type and does not  
have any resistance.  
The AUX input requires the setting made in “MENU” > “AUX”  
of <Function Control> (page 11).  
Switching display: [DISP]  
Changes the information displayed. Refer to page 14  
for the details of the display setting.  
Text/Title scroll: [DISP]  
Scrolls the text display of a CD or audio files when  
pressed for at least 1 second.  
|
8
KDV-U4349/ KDV-U4349M/ KDV-U4449  
DVD/ USB/ iPod play functions  
Changing the audio channel  
Changes the audio channel when this button is  
pressed.  
: [2]  
Video CD  
Disc play: Disc slot  
Starts playing when a disc is inserted.  
Repeat play: [4]  
When a disc is inserted, the “IN” indicator is ON.  
Each time you press the button, the Repeat Play  
alternates between the modes.  
Do not attempt to insert a disc into the slot if another one  
is already there.  
Chapter Repeat (“CHAP REP”), Title Repeat  
(“TITL REP”) and OFF (“REP OFF”)  
Chapter Repeat (“CHAP REP”), Program  
Repeat (“PRG REP”) and OFF (“REP OFF”)  
Track Repeat (“TRAC REP”) and OFF (“REP  
OFF”) (Video CD: PBC Off)  
DVD-VIDEO  
DVD-VR  
The unit can only play 12 cm (5 inch) discs. If you insert an  
8 cm (3 inch) disc, it will get stuck inside and can cause the  
unit to malfunction.  
Video CD  
C D  
Disc ejection: [0]  
File Repeat (“FILE REP”), Folder Repeat (“FOLD  
REP”), and OFF (“REP OFF”)  
Audio File  
MPEG/DivX®  
You can eject the disc for 10 minutes after switching off the  
engine.  
Folder Repeat (“FOLD REP”) and OFF (“REP  
OFF”)  
JPEG  
USB device/iPod play: USB Terminal  
Connecting a USB device starts playback.  
File Repeat (“REP ONE”), All Repeat (“REP ALL),  
and OFF (“REP OFF”)  
iPod  
For the playable audio file, video file, media, and devices,  
refer to <About Audio file> (page 4), <About Video file>  
(page 4).  
Set to “MENU” > “FILETYPE” > “USB” > “PIC” of the <Function  
Control> (page 11) when you select USB and iPod source.  
Random play  
: [3]  
Randomly plays the track/ file in the disc or folder.  
When Random Play is turned on, “DISC RDM”/ “FOLD  
RDM” is displayed.  
C D MPEG/DivX® iPod  
Video CD Audio File  
USB device/ iPod removing  
To disconnect the USB device/ iPod, stop the playback  
by pressing the [1] button, and then disconnect the  
USB device/ iPod.  
Pause and play: [6]  
Switches between pause and play each time this  
button is pressed.  
iPod : Disabled when VIDEO is being played.  
MPEG/DivX® iPod : [3]  
All Random play  
Audio File  
Stops playing: [1]  
If you press this button for at least 3 seconds while  
playing a file, all files in the media play at random  
(“ALL RDM”).  
Pressing the button again turns the random play off  
(“RDM OFF”).  
Track/File search: [4]/ [¢]  
Changes the chapter/ track/ file when this button is  
pressed.  
Fast reverses or forwards the music while pressing.  
Pressing these buttons for 5 seconds or longer  
accelerates the speed of fast-forward or fast-reverse.  
The time required to turn on the all random function may  
become longer depending on the number of songs in iPod  
or the folder structure.  
For the iPod, the fast-forward or reverse speed does not  
change.  
iPod : Turning on the all random function changes  
the iPod browse item to “songs. This browse item will not  
change even if the all random function is turned off.  
iPod : If the brows item is changed to search for  
music while the all random function is on, the all random  
function is turned off and the songs in the browse item are  
played at random.  
Title/ Folder search  
MPEG/DivX®  
DVD-VIDEO DVD-VR Audio File  
JPEG : [FM+]/ [AM–]  
Changes the title/ folder.  
Search mode  
C D MPEG/DivX® JPEG  
iPod  
Audio File  
: [  
]
After pressing this button, you can quickly search  
songs with the [AUD] knob. See <Music/Video  
Search> (page 21) for details.  
English  
|
9
Function Control/ Setup Menu  
Function Control  
Functions in the table below can be set up by using Function Control.  
Displayed item is depending on currently selected  
1 Enter Function Control mode  
Press the [ ] button for at least 1 second.  
“FUNCTION” is displayed.  
source or mode. The mark in Condition column  
shows the condition to which the item is displayed.  
: Can be set in other than standby state.  
: Can be set in standby state.  
2 Select your desired setup item  
: Can be set only during playback of the iPod source.  
(USB source used when the iPod is connected)  
: Can be set during USB source.  
: Can be set during DVD source.  
: Can be set during Tuner source.  
Operation type  
Operation  
Movement between items Turn the [AUD] knob.  
Selection of item  
Return to previous item  
Press the [AUD] knob.  
Press the [ ] button.  
: Can be set during FM reception.  
Repeat selection and determination until your  
desired setup item is selected.  
In this manual, the above selection is indicated as  
Press [ ] 1sec., and select “MENU” > “ICON.  
: Can be set while accessing AUX source.  
: Can be set for sources other than the standby  
source by setting “2ZON” of <Audio Setup> (page  
25) to “ON.  
: Can be set during all sources.  
Category Function of setup item  
“iPodCTRLAllows you to set up iPod Control by Hand  
Mode.  
Condition  
Refer to the respective page for information on how to  
set the items with reference page number.  
Only the items available to the current source are  
displayed.  
“DSP”  
Allows you to set up the sound environment.  
“MENU”  
Allows you to set up the environment.  
“RETURN” Exit Function Control mode.  
Strong electrical fields (such as from power lines) may  
cause unstable sound quality when CRSC is turned ON.  
In such a situation, turn it OFF.  
3 Make a setting  
Press the [AUD] knob or turn the [AUD] knob to  
select a setting value, and then press the [AUD]  
knob.  
*Factory setting  
• The value of items with [AUD] mark can be set by  
pressing the [AUD] knob.  
• The value of items with [4/ ¢] mark can be  
set by pressing the [4] or [¢] button.  
• Some items require you to keep pressing the  
[AUD] knob for 1 or 2 seconds to set. For these  
items, the time during which you need to keep  
pressing the [AUD] knob is displayed in the Entry  
column in seconds.  
4 Exit Function Control mode  
Press the [ ] button for at least 1 second.  
“MENU”  
Item  
Setting  
Entry Setting overview  
Condition Page  
Sets/Resets security code.  
“CODE SET”/  
“CODE CLR”  
“DIM”  
1 sec.  
24  
4
4
/
/
/
¢
¢
Adjusts the brightness of the display according to the  
surrounding illumination.  
Sets the Graphics mode of the display.  
“OFF”*/ON”  
32  
“ICON”  
“OFF”/ON1”/  
“ON2”*  
“R”*/“SW”/AV”  
4
¢
Sets the preout output.  
“SWPRE”  
32  
|
10 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Item  
“ZONE2”  
Setting  
“F”/“R”*  
Entry Setting overview  
Condition Page  
4
/
/
/
¢
Specifies the destination of sub source sound when the Dual  
Zone function is turned on.  
Selects the tuning mode of the radio.  
32  
4
¢
“AUTO1”/AUTO2”/ “AUTO1”*/AUTO2”/  
“MANUAL”  
“CRSC”  
“NAME SET”  
“P/N”  
31  
“MANUAL”  
“OFF”/ON”*  
4
¢
Switches to Monaural to decrease noise when reception is poor.  
Sets the display when switched to AUX source.  
14  
1 sec.  
/
4
¢
Sets the color system for the monitor. You have to turn the power  
off after the setting is changed.  
“PAL”/“NTSC”  
Displays the firmware version of Microvision.  
“M/V”  
“ABOOK”  
“SKIP”  
21  
4
4
/
/
¢
¢
Sets the audio book playback speed.  
“SL/“NM”/“FA”  
Sets the ratio of skip performed with <Music/Video Search for  
iPod>.  
“0.5%”*/“1%”/  
“5%”/“10%”  
“OFF”/ON”*  
4
4
/
/
¢
¢
Specifies whether or not the artworks of the music files are  
displayed.  
Selects playback file type when a disc or USB contains different  
types of files.  
“iART”  
13  
“FILETYPE” >“DISC” “A/V”/“PIC”  
>“USB”  
You can make advanced settings in the “FILE TYPE” of the Setup  
menu. “A” or “V” may appear on the display after setting.  
Specifies whether the text is scrolled automatically.  
4
4
/
/
¢
¢
“SCL”  
“AUX”  
“AUTO”*/MANU”  
“OFF”/ON1”*/  
“ON2”  
31  
Sets whether to display AUX during source selection.  
Specifies whether to enable demonstration.  
Display the format version of DivX.  
“DEMO”  
“DIVX”  
“OFF”*/ON”  
2 sec.  
7
“iPodCTRL”  
Item  
“iPodCTRL”  
Setting  
“HANDS ON”/  
“MODE OFF”*  
Entry Setting overview  
Condition Page  
When set to “HANDS ON, allows you to operate iPod with the  
22  
AUD  
control on the iPod.  
“DSP”  
Item  
“CONTROLEQ”  
Setting  
Entry Setting overview  
Condition Page  
Sets the sound quality.  
[AUD]  
25  
Sets the Bass Boost level in two steps.  
“B.BOOST” “OFF”*/  
“STEP1”/“2”  
“HIGHWAY” “OFF”/  
AUD  
Compensates the low volume or bass sound being lost by road  
noises to make vocal sound clearer.  
32  
AUD  
“STEP1”/“2”/  
“3”*/“4”  
Compensates the sound environment in accordance with the  
listening position.  
Selects the car type to compensate the distance difference  
between each speaker.  
Sets the connected speaker, speaker size, and installation  
position.  
Makes fine adjustment of the compensation value specified at  
Cabin.  
“POSITION”  
“SETUP” “CABIN”  
“SPEAKER”  
[AUD]  
[AUD]  
[AUD]  
[AUD]  
26  
27  
27  
28  
“DTA”  
Makes fine adjustment of the X’Over value specified at Speaker.  
“X’OVER”  
“PRESET” “RECALL”  
[AUD]  
[AUD]  
28  
29  
Registering the value setup by Sound Control. Recalling the  
sound setup registered by <Audio Preset Memory>.  
Registering the value setup by Sound Control.  
“MEMORY”  
“DSP SET”  
[AUD]  
29  
Setting “BYPASS” passes the DSP function.  
Setting “THROUGH” activates the DSP function.  
“BYPASS”/  
“THROUGH”*  
AUD  
English  
|
11  
Function Control/ Setup Menu  
Setup menu of remote control  
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can  
also set a language for the subtitles and the Setup menu, among other things.  
1 Select DVD or USB source  
Press the [SRC] button.  
Select the “DVD” or “USB” display.  
5 Press the [5]/[] button to select the desired  
item, and then press the [ENTER] button.  
To cancel pop-up menu, press the [RETURN]  
button.  
2 Press the [7] button.  
6 Press the [5]/[] button to select the desired  
setting, and then press the [ENTER] button to  
confirm your selection.  
3 Enter Setup menu mode  
Press the [SETUP] button.  
7 Exit Setup menu mode  
Press the [SETUP] button.  
The Setup menu ends.  
The memory cannot be erased by the Reset button.  
4 Press the [2]/[3] button to select the menu.  
LANGUAGE/ PICTURE/ AUDIO/ OTHER  
|
12 KDV-U4349/ KDV-U4349M/ KDV-U4449  
LANGUAGE  
Item  
Setting  
Selects the initial disc menu language and audio language.  
Refer to the language code list (page 33).  
MENU LANGUAGE/  
AUDIO LANGUAGE  
SUBTITLE  
ON SCREEN  
LANGUAGE  
Selects the initial subtitle language or remove the subtitle (OFF). Refer to the language code list (page 33).  
Selects a language for the setup menu and on screen display.  
PICTURE  
Item  
MONITOR TYPE  
Setting  
16:9: Select when a 16:9 wide TV is connected.  
4:3 LETTERBOX: Select when a standard 4:3 TV is connected. Displays a wide picture with bands on the  
upper and lower portions of the screen.  
4:3 PAN SCAN: Select when a standard 4:3 TV is connected. Automatically displays the wide picture on the  
entire screen and cuts off the portions that do not fit.  
Selects the on-screen bar position on the monitor.  
1: Higher position.  
2: Lower position (Guidance below the disc setup menu will disappear.)  
ON: Displays the artwork of your iPod.  
OSD POSITION  
iPod ARTWORK  
OFF: Does not display the artwork of your iPod.  
AUDIO  
Item  
DOWN MIX  
Setting  
SURROUND COMPATIBLE: Uses multi-channel surround audio by connecting an amplifier compatible with  
Dolby Surround.  
STEREO: Normally select this.  
You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software.  
• NORMAL: Reduce the dynamic range a little.  
• WIDE: Enjoy a powerful sound at a low volume level with its full dynamic range.  
• DIALOG: Reproduce the movie dialog more clearly.  
D.RANGE  
COMPRESSION  
OTHER  
Item  
DivX REGISTRATION  
Setting  
This unit has its own Registration Code. Once you have played back a disc in which the Registration Code  
recorded, this unit’s Registration Code is overwritten for copyright protection.  
1. Press the [ENTER] button to show Code.  
2. Press the [ENTER] button to exit.  
When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as  
the one above. Otherwise the file may not be able to play with this unit. Remaining number of viewing  
is displayed when playing a DivX VOD file with the viewing restriction. When the remaining number of  
viewing reached 0, a warning message appears and the file cannot be played.  
Selects playback file type when a disc or USB contains different types of files.  
AUDIO: Play Audio file (MP3, WMA, WAV).  
STILL PICTURE: Play JPEG file.  
FILE TYPE (DISC)/  
FILE TYPE (USB)  
VIDEO: Play Video file (MPEG, DivX).  
AUDIO+VIDEO: Play Audio or Video file.  
English  
|
13  
Clock/ Display Settings  
In iPod source  
Information  
Music title & Artist name  
Album name & Artist name  
Play time & Music number  
Clock  
Manual Clock Adjustment  
Display  
“TITLE”  
“ALBUM”  
“P-TIME”  
“CLOCK”  
1 Select the Clock display  
Press the [DISP] button.  
2 Enter Clock adjustment mode  
Press the [DISP] button for at least 1 second.  
The clock display blinks.  
In Standby/ Auxiliary input source  
Information  
Source name  
Clock  
Display  
“SRC NAME”  
“CLOCK”  
3 Adjusting Clock  
Operation type  
Adjust the hours  
Adjust the minutes  
Operation  
Press the [FM+] or [AM–] button.  
Press the [  
4] or [¢] button.  
Select the text  
Press the [DISP] button.  
4 Exit Clock adjustment mode  
Press the [DISP] button.  
When you select the clock display, the display setting of  
each source will be changed to the clock display.  
If the selected display item does not have any  
information, alternative information is displayed.  
If the iPod Control by Hand Mode is set to on while  
playing the iPod, “iPodMODE” is displayed.  
Text Display Selection  
Changing displayed information on each source  
following;  
In Tuner source  
Information  
Frequency  
Clock  
Display  
“FREQ”  
“CLOCK”  
Auxiliary Input Display Setting  
Selects the display when changing to Auxiliary  
input source.  
In DVD/ Video CD source  
Information  
Display  
1 Select Auxiliary input source  
Press the [SRC] button.  
Select the “AUX” display.  
Title number & Chapter number/  
Program number & Chapter number  
Track number & Play time*2  
Clock  
“TNO : CNO”*1  
“PNO : CNO”*1  
“P-TIME”  
2 Enter Auxiliary input display setting mode  
Press [ ] 1 sec., and select “MENU” > “NAME  
SET.  
Press the [AUD] knob for at least 1 second.  
The presently selected Auxiliary input display is  
displayed.  
“CLOCK”  
*1 DVD-VIDEO or DVD-VR only  
*2 Track number and play time are not displayed with  
Video CD PBC On.  
In CD & External disc source  
Information  
Disc title  
Track title  
Play time & Track number  
Clock  
Display  
“D-TITLE”  
“T-TITLE”  
“P-TIME”  
“CLOCK”  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
3 Select the Auxiliary input display  
Turn the [AUD] knob.  
“AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”  
In Audio file/ Video file/ JPEG file source  
4 Exit Auxiliary input display setting mode  
Information  
Display  
“TITLE”*1  
“ALBUM”*1  
“FOLDER”  
“FILE”  
Press the [ ] button.  
Title & Artist name  
Album name & Artist name  
Folder name  
File name  
Play time & File number*1  
Clock  
When operation stops for 10 seconds, the name at that  
time is registered, and the Auxiliary input display setting  
mode closes.  
“P-TIME”  
“CLOCK”  
The Auxiliary input display can be set only when the  
built-in auxiliary input or the auxiliary input of optional  
KCA-S220A is used. On the KCA-S220A, “AUX EXT” is  
displayed by default.  
*1 “JPEG” is displayed when a file is JPEG.  
|
14 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Tuner Operation  
Theft Deterrent Faceplate  
Frequency Step Setting  
The faceplate of the unit can be detached and taken  
with you, helping to deter theft.  
Changing the tuning frequency step.  
The original setting is FM band 50 kHz, and AM  
band 9 kHz.  
Removing the Faceplate  
Press the Release button.  
The faceplate unlocks, allowing you to detach it.  
1 Turn the power OFF  
Press the [SRC] button for at least 1 second.  
¤
2 Switch the frequency step  
While pressing the [1] and [5] buttons, press the  
[SRC] button.  
Release your fingers from the button after the  
display appears.  
The faceplate is a precision piece of equipment and can  
be damaged by shocks or jolts.  
Keep the faceplate in its faceplate case while detached.  
Do not expose the faceplate (and the faceplate case) to  
direct sunlight or excessive heat or humidity. Also avoid  
places with too much dust or the possibility of water  
splashing.  
The frequency step changes to FM band 200 kHz,  
and AM band 10 kHz.  
To prevent deterioration, do not touch the terminals of  
the unit or faceplate with your fingers.  
When the same operation is repeated, the frequency  
step returns to the original setting.  
When the frequency step is changed, the frequencies in  
the memory are deleted.  
Reattaching the Faceplate  
Refer to the following diagram when  
reattaching the faceplate.  
English  
|
15  
Disc/ USB Operations of Remote Control  
Fast Forwarding or Fast Backwarding  
Press the [1] or [¡] button repeatedly to  
select the required speed.  
Before Use  
Turn on the monitor to watch the playback picture.  
If you turn on the monitor, you can also control  
playback of other discs by referring to the monitor  
screen.  
x2, x5, x10, x20, x60  
C D  
DVD-VIDEO DVD-VR Video CD  
Audio File  
1, 2, 3 MPEG/DivX®  
Set the remote controller mode switch to “DVD”  
mode before starting operation, refer to <Remote  
Controller mode switch> (page 30).  
DVD-VIDEO DVD-VR  
Slow Forwarding or Backwarding  
Video CD  
1 Press the [38] button to pause.  
2 Press the [1] or [¡] button repeatedly to  
select the required speed.  
Playing a Disc  
1/32, 1/16, 1/8, 1/4, 1/2  
Inserting a disc in the unit  
“READING” appears on the display, and playback  
starts automatically.  
If playback does not start, press [38].  
In some cases, the disc menu might appear  
instead.  
Slow motion playback in reverse is not possible with  
DVD-VR or Video CDs.  
Forward frame-by-frame playback  
Video CD  
DVD-VIDEO DVD-VR  
1 Press the [38] button to pause.  
2 Press the [¢] button.  
The menu screen may be displayed first after loading a DVD  
or Video CD 2.0 which offers a menu.  
5 minutes skip MPEG/DivX®  
Press the [2] or [3] button.  
Skips from the head of a file at five-minute intervals.  
DVDs may have a region code. Your player does not play  
discs that have a region code different from your player.  
About the region code, refer to Region code (page 6).  
The playback file may be different depending on the file  
type set for Audio, Video and JEPG files. (page 13)  
Example: 1:23 = 5:00 = 10:00  
The operation is enabled when the Status and Control  
bars are not displayed.  
Playing a USB device  
Camera angle  
DVD-VIDEO  
Connecting the USB device  
If the disc contains scenes recorded at different  
camera angles, you can change to a different  
camera angle during playback.  
Press the [ANGLE] button repeatedly during  
playback to select a desired angle.  
The number of the current angle appears on the  
display.  
For a USB device that includes audio files, video  
files, or photo files, “READING” appears in the  
display, and playback starts automatically.  
The playback file may be different depending on the file  
type set for Audio, Video and JEPG files. (page 13)  
Subtitles  
MPEG/DivX®  
DVD-VIDEO DVD-VR  
Press the [SUBTITLE] button repeatedly  
during playback to see the different subtitle  
languages.  
Basic Operation  
Playing or pausing  
Press the [38] button.  
Changing the audio stream  
DVD-VIDEO DVD-VR  
MPEG/DivX®  
Stopping the play  
Press the [AUDIO] button repeatedly during  
playback to hear a different audio stream.  
Press the [7] button.  
Searching for a chapter/ scene/ track/ file  
Press the [4] or [¢] button.  
Changing the audio channel  
Video CD  
Press the [AUDIO] button repeatedly during  
playback to hear a different audio channel  
(STEREO, Left or Right).  
Selecting a title/ folder  
JPEG Audio File  
Press the [FM+] or [AM–] button.  
MPEG/DivX®  
DVD-VIDEO DVD-VR  
|
16 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Changes the audio stream.  
Displaying Status and Control  
on-screen  
Changes the subtitle language.  
DVD-VIDEO DVD-VR Video CD  
MPEG/DivX® JPEG  
Switches the Track time (“TIME”), remaining  
track (“REM”), Disc time (“TOTAL), and  
remaining disc (“T.REM”).  
Refer to <Time search> (page 18).*1  
Video CD  
You can display various information about the disc  
loaded on-screen.  
Example: DVD-VIDEO  
Direct Track Search.*1  
Status bar  
Switches the Track repeat (“TRACK”), and repeat  
off (“OFF”).*1  
Switches the Disc random (“ALL), and random  
off (“OFF”).*1  
Changes the audio channel.  
Control bar  
Switches the File repeat (“TRACK”), Folder  
repeat (“FOLDER”), and repeat off (“OFF”).  
Switches the Folder random (“FOLDER”), All  
random (“ALL”), and random off (“OFF”).  
Changes the audio stream.  
MPEG/DivX®  
JPEG  
Status bar  
1 Disc type  
2 DVD: Audio signal format type and channel  
Video CD: PBC  
3 Playback mode  
Changes the subtitle language.  
“T.RPT” (Title/ Track repeat), “C.RPT” (Chapter  
repeat), “PG.RPT” (Program repeat), “F.RPT”  
(Folder repeat)  
Switches the Folder repeat (“FOLDER”), and  
repeat off (“OFF”).  
*1 While PBC is not in use.  
F.RND” (Folder random), “A.RND” (All random)  
4 Playback information  
“T” (Title/ Track), “C” (Chapter), “PG” (Program),  
“PL(Play list), “F” (Folder/ File)  
5 Time indication  
1 Press the [OSD] button during playback.  
Pressing the button repeatedly selects Status bar,  
Status & Control bar, and Status bar off sequentially.  
2 Press the [2] or [3] button during control bar  
on-screen to select an item. Press the [ENTER]  
button.  
6 Playback status  
3” (Play), “8” (Pause), “7” (Stop), “¡/1”  
(Forward/reverse search), “ ”/” ” (Forward/  
reverse slow-motion)  
To cancel pop-up menu, press the [RETURN]  
button.  
Control bar  
3 Press the [5] or [] button to change or select  
Format  
Icon  
Operation  
the setting. Press the [ENTER] button.  
Switches the Chapter time (“TIME”), remaining  
chapter (“REM”), Title time (“TOTAL), and  
remaining title (“T.REM”).  
DVD-VIDEO  
Refer to <Time search> (page 18).  
Direct Title Search.  
Direct Chapter Search.  
Switches the Chapter repeat (“CHAPTER”), Title  
repeat (“TITLE”), and repeat off (“OFF”).  
Changes the audio stream.  
Changes the subtitle language.  
Changes the camera angle.  
Switches the Program/ Play list time (“TOTAL),  
remaining program/ play list (“T.REM”).  
Refer to <Time search> (page 18).  
DVD-VR  
Direct Chapter Search.  
Switches the Chapter repeat (“CHAPTER”),  
Program repeat (“PROGRAM”), and repeat off  
(“OFF”).  
English  
|
17  
Disc/ USB Operations of Remote Control  
DVD-VIDEO Disc Menu  
Zoom  
DVDs may offer menus that allow you to access  
special features.  
The zoom function allows you to enlarge the video  
image.  
DVD-VIDEO DVD-VR Video CD MPEG  
Press the [ZOOM] button repeatedly during  
playback or in the pause mode to enlarge the  
image.  
1 Press the [MENU] button  
The disc menu is displayed.  
2 Use the [5]/[]/[2]/[3] button to highlight  
your selection, then press the [ENTER] button.  
OFF, 1 – 6  
3 To return to the first menu feature, press the  
[TOP MENU] button again.  
You can move through the zoomed picture  
using [5]/[]/[2]/[3].  
4 To remove the disc menu, press the [MENU]  
button again.  
JPEG  
1 Press the [38] button to pause  
2 Press the [ZOOM] button repeatedly to  
enlarge the image  
OFF, 1, 2  
You can move through the zoomed picture  
using [5]/[]/[2]/[3].  
DVD-VR Menu  
Selects an option from the DVD-VR Disc menu.  
1 Press the necessary operation button  
In case of Program list : [TOP MENU]  
In case of Play list : [MENU]  
Time Search  
DVD-VIDEO DVD-VR Video CD  
The Time Search function allows you to start playing  
at any chosen time on the disc.  
1 Press the [OSD] button twice briefly during  
playback  
2 Press the [2] or [3] button to select the Time  
Search icon in the on-screen display. Press the  
[ENTER] button.  
2 Use the [5] or [] button to highlight your  
selection, then press the [ENTER] button  
To remove the disc menu, press the [MENU]  
button or the [TOP MENU] button again  
The “_: _ _: _ _” appears in the Time Search box.  
3 Press the [5] or [] button to change the  
number, then press the [2] or [3] button to  
move to the next entry  
Video CD PBC Menu  
4 Press the [ENTER] button to confirm the start  
time  
Playback starts from the selected time on the disc.  
If you enter an invalid time, playback will  
continue from the current point.  
Press [RETURN] to return to the menu screen.  
Menu settings and operating procedures may  
differ. Follow the instructions on the each menu  
screen.  
Canceling the PBC playback  
1 Press the [7] button to stop  
2 Press the [DIRECT] button  
3 Press the number buttons  
Direct Search  
Searching the chapter by entering the number.  
1 Select the search mode  
4 Press the [ENTER] button  
Press the [DIRECT] button.  
To resume PBC, press [TOP MENU] or [MENU].  
Each time you press the button, the search mode  
alternates between the modes.  
|
18 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Chapter search (“CHAP”), Title search  
(“TITL), and Search mode off.  
Chapter search (“CHAP”), Program/Play  
list search (“PRGM”/ ”PLST”), and Search  
mode off.  
DVD-VIDEO  
DVD-VR  
An image is displayed at the folder list position when an  
album art is attached to the tag of a playing audio file.  
To select a playback mode  
Track search (“TRAC”/“NMBR”*) and Search  
mode off. *PBC ON only for VCD  
Video CD  
C D  
1 Show the Playback mode selection screen  
Press the [OSD] button.  
Track search (“TRAC” or “Track Search”),  
Folder search (“FOLD” or “Folder Search”),  
and Search mode off.  
MPEG/DivX®  
Audio File  
File search (“FILE, TRAC” or “Track Search”),  
Folder search (“FOLD” or “Folder Search”),  
and Search mode off when pressed while  
playing a JPEG.  
JPEG  
2 Press the [2] or [3] button to select a  
playback mode  
C D  
Audio File  
“REPEAT”/ “RANDOM”  
3 Press the [5] or [] button to select an item  
“REPEAT”: Track/File repeat*1 (“TRACK”), Folder  
repeat*2 (“FOLDER”), and repeat off  
(“OFF”).  
2 Press the number buttons  
3 Press the [ENTER] button  
“RANDOM”*1: Folder random (“FOLDER”), All  
random (“ALL), and random off  
(“OFF”).  
Direct Search cannot be performed during Random play.  
The Search mode is cleared automatically after  
approximately 5 seconds.  
“0” is not displayed in the first digit by pressing the [0]  
button.  
*1 Not selectable for JPEG  
*2 Not selectable for CD  
Example: “- -” = Press [0], [2] = “- 2.  
4 Press the [ENTER] button  
File Select MPEG/DivX® JPEG  
C D  
Audio File  
List screen  
You can select a file from the list display.  
1 Press the [7] button to stop  
1 Folder list  
2 Track information  
3 Track list  
2 Show the list screen  
Press the [MENU] or [TOP MENU] button.  
3 Select an item from the folder list  
Use [5]/[]/[2]/[3] to highlight your selection,  
and then press the [ENTER] button.  
1 Show the control screen  
MPEG/DivX® JPEG Press the [7] button to stop.  
C D  
Automatically appear during  
play.  
Audio File  
4 Select a track to start playing  
Use [5]/[]/[2]/[3] to highlight your selection,  
and then press the [ENTER] or [3] button.  
To go back to the folder list, press the [RETURN]  
button.  
2 Press [2] or [3] to select “Folder” column or  
“Track” column MPEG/DivX® JPEG  
Audio File  
3 Press the [5] or [] button to select a folder or  
track  
5 To remove the List screen, press the [MENU]  
button again.  
4 Start playback  
MPEG/DivX® JPEG Press the [ENTER] button.  
Audio File  
C D  
Playback starts automatically.  
English  
|
19  
iPod Operations of Remote Control  
Before Use  
3 Search for music  
Operation type  
Movement between items Press the [  
Video output setting of iPod needs to be set on  
your iPod.  
Operation  
5
] or [  
Press the [ENTER] or [  
Press the [ ] or [MENU] button.  
Press the [TOP MENU] button.  
] button.  
Turn on the monitor to watch the playback picture.  
If you turn on the monitor, you can also control  
playback of other discs by referring to the monitor  
screen.  
Selection of item  
3
] button.  
Return to previous item  
Return to Top menu  
2
Cancelling the Search mode Press the [RETURN] button.  
Set the remote controller mode switch to “DVD”  
mode before starting operation, refer to <Remote  
Controller mode switch> (page 30).  
An image is displayed in the category list when a playing  
song has artwork with “MENU” > “iART” (page 11) of the  
<Function Control> set to ON.  
It takes some seconds to read artwork. You cannot  
operate during the read operation.  
Playing the iPod  
Connecting the iPod  
“READING” appears in the display, and playback  
starts automatically.  
To select a playback mode  
1 Show the Playback mode selection screen  
Playing or pausing  
Press the [38] button.  
Press the [OSD] button.  
Stopping the play  
Press the [7] button.  
2 Select a playback mode  
Searching for a file  
Press the [4] or [¢] button.  
Press the [2] or [3] button.  
“REPEAT”/ “RANDOM”/ “AUDIO BOOK”  
Fast Forwarding or Fast Backwarding  
Press the [1] or [¡] button.  
3 Select an item  
Press the [5] or [] button.  
“REPEAT”: File repeat (“ONE”), All repeat (“ALL), and  
repeat off (“OFF”).  
Search Mode  
“RANDOM”: Song random (“SONGS”), Album  
random (“ALBUMS”), and random off  
(“OFF”).  
You can select a file from the list display.  
“AUDIO BOOK”: Normal speed (“NORMAL), Faster  
speed (“FASTER”), and Slower speed  
(“SLOWER”).  
4 Press the [ENTER] button  
1 Category list  
2 Track information  
3 Track list  
1 Enter Search mode  
Press the [TOP MENU] or [MENU] button.  
2 Select an menu item  
Press the [5] or [] button to select an menu  
Music/ Shuffle Songs  
|
20 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Music disc/Audio file/iPod Operation of Control Panel  
Music Search for iPod  
Music/Video Search  
JPEG  
C D MPEG/DivX®  
Audio File  
Search for the song (in iPod) you want to play.  
Selecting the track/ file you want to listen to from  
the device or media being played now.  
1 Enter Music Search mode  
Press the [ ] button.  
“SEARCH” is displayed.  
1 Enter Music/Video Search mode  
Press the [ ] button.  
“SEARCH” is displayed.  
2 Search for song  
Operation type  
Operation  
Displays the current Audio file name.  
Movement between items Turn the [AUD] knob.  
Skip Search *1  
Selection of item  
Return to previous item  
Return to Top menu  
Press the [4] or [¢] button.  
2 Search for track/ file  
Audio File MPEG/DivX® JPEG  
Press the [AUD] knob.  
Press the [FM+] button.  
Press the [FM+] button for at least 1  
second.  
Operation type  
Movement between  
folders/files  
Operation  
Turn the [AUD] knob, or press the [FM+]/  
[AM–] button.  
Search by initial  
Press the [ ] button for at least 1 second.  
Selection of folder/flie  
Return to previous folder Press the [  
Return to root folder  
Press the [AUD] knob or [  
¢
] button.  
The position of the currently displayed item is  
indicated by the icon bar in eight steps.  
4
Press the [  
second.  
] button.  
] button for at least 1  
4
Cancelling the Music Search mode  
Press the [ ] button.  
: Indicates that your selection is a folder.  
: Indicates that your selection is a file.  
The folder tree is not displayed and only folders  
with files are displayed in order. Refer to <Playing  
order of the Audio file> (page 4).  
Searching for Music by Initial  
You can select an alphabetic character from the list  
in the browse item (artist, album, etc.) selected now.  
C D  
1 Enter alphabet search mode  
Press the [ ] button for at least 1 second.  
“A B C …” is displayed.  
Operation type  
Operation  
Movement between track Turn the [AUD] knob, or press the [FM+]/  
[AM–] button.  
Selection of track  
If you can not search for a song by an alphabetic  
character in the browse item selected now, the data on  
the screen does not change.  
Press the [AUD] knob.  
Return to first track  
Press the [  
second.  
4] button for at least 1  
2 Select the initial to be searched for  
Operation type Operation  
Move to the next character. Turn the [AUD] knob, or press the  
Cancelling the Music/Video Search mode  
Press the [ ] button.  
[
4
]/ [ ] button.  
¢
Move to the next row.  
Cancelling the alphabet  
search mode  
Press the [FM+] or [AM–] button.  
Press the [ ] button.  
Music/Video Search cannot be performed during  
Random play.  
3 Determine the selected initial  
Press the [AUD] knob.  
Start search. When search is completed, the Music  
Search mode is selected again at the selected  
character position.  
Next page 3  
English  
|
21  
Music disc/Audio file/iPod Operation of Control Panel  
iPod Control by Hand Mode  
*1 Skip Search: The number of songs to be skipped is  
Allows you to operate iPod with the control on the  
iPod.  
determined by the ratio of the total number of songs  
in the list which is selected now. Set the ratio with  
“SKIP” in <Function Control> (page 11). Keep pressing  
this button for 3 seconds or longer skips songs at 10%  
irrespective of the setting.  
Display  
Setting  
“HANDS ON”  
“MODE OFF”  
iPod control by hand mode is ON.  
iPod control by hand mode is OFF.  
The time of search by alphabet may become long  
depending on the number of songs in iPod or the folder  
structure.  
When selecting an initial in the alphabet search mode,  
entering “*” searches symbols and entering “1” searches  
digits.  
If the first character string begins with an article “a, an,  
or “the” in the alphabet search mode, it is searched for in  
defiance of the article.  
1 Enter iPod Control by Hand Mode  
Press [ ] 1 sec., and select “iPodCTRL”.  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
2 Set the iPod Control by Hand Mode  
Turn the [AUD] knob.  
3 Exit iPod Control by Hand Mode  
Press the [ ] button.  
In the iPod Control by hand mode, iPod cannot be  
operated using this unit.  
This mode is not compatible with music information  
display. The display will show “iPodMODE.  
The following iPods cannot be controlled using this unit.  
iPod nano (1st generation), and iPod with video. (KCA-  
iP102 (optional accessory) connected only.)  
When you cancel the hand mode while playing a video  
file, the video file stops and a music file starts.  
|
22 KDV-U4349/ KDV-U4349M/ KDV-U4449  
3. Press the [4] or [¢] button.  
Press the [38] button to cancelling Direct  
Music Search.  
Basic Operation of Disc Changer  
(Optional)  
Selecting CD changer source  
Press the [SRC] button.  
Select the “CD CH” display.  
Direct Music Search cannot be performed during playing  
of Random play, or scan play.  
Playing or pausing  
Press the [6] button.  
Searching the disc by entering the disc number  
(Direct Disc Search)  
1 Set the remote controller mode switch to  
“AUD” mode  
2. Press the number buttons on the remote  
control.  
3. Press the [FM+] or [AM–] button.  
Press the [38] button to cancelling Direct  
Disc Search.  
Music search  
Press the [4] or [¢] button.  
Changes the music when this button is pressed.  
Fast reverses or forwards the music while pressing.  
Disc Search  
Press the [FM+] or [AM–] button.  
Playing the Current Song or Disc Repeatedly  
(Repeat play)  
Press the [4] button.  
Direct Disc Search cannot be performed during playing  
of Random play, or scan play.  
Input “0” to select disc 10.  
Pressing the button repeatedly selects Track Repeat  
play on (“TRAC REP”), Disc Repeat play on (“DISC  
REP”), and Repeat play off (“REP OFF”) sequentially.  
Set the remote controller mode switch to “AUD” mode  
before starting operation, refer to <Remote Controller mode  
switch> (page 30).  
Playing the first part of each music on the disc  
(Scan play)  
Press the [2] button.  
Successively plays the intro of the music in the disc.  
When Scan Play is turned on, “TRAK SCN” is  
displayed.  
To use the functions written as the [SCN] button in the  
option manual, press the [2] button.  
Playing all the music on the disc in random  
order (Random play)  
Press the [3] button.  
Randomly plays the music in the disc.  
When Random Play is turned on, “DISC RDM” is  
displayed.  
Playing the music in the disc changer randomly  
(Magazine random play)  
Press the [5] button.  
Pressing the button toggles the setting between  
Magazine random play on (“MGZN RDM”) and off  
(“RDM OFF”).  
Searching the music by entering the track  
number (Direct Music Search)  
1 Set the remote controller mode switch to  
“AUD” mode  
2. Press the number buttons on the remote  
control.  
English  
|
23  
Other Functions  
Entering Security Code  
Activating Security Code  
The Security Code is required to use the audio unit  
when the unit is first used after removed from the  
battery power source or the Reset button is pressed.  
When Security Code is set, possibility of theft  
is reduced because input of Security Code is  
prompted to turn on the unit once it is turned off.  
1 Turn the power ON.  
2 Do the step 3 through 4 operation, and enter  
You can set the Security Code with a 4 digit number of your  
choice.  
the Security Code.  
“APPROVED” is displayed.  
Now, you can use the unit.  
The Security Code cannot be displayed or referenced. Make  
a note of the Security Code and treasure it up.  
1 Select Standby  
Press the [SRC] button.  
Select the “STANDBY” display.  
Deactivating Security Code  
2 Enter Security Code mode  
Deactivating the Security Code function.  
Press [ ] 1 sec., and select “MENU” > “CODE SET.  
Press the [AUD] knob for at least 1 second.  
When “ENTER” is displayed, “CODE” is also displayed.  
1 Select Standby  
Press the [SRC] button.  
Select the “STANDBY” display.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
2 Enter Security Code mode  
3 Enter Security Code  
Press [ ] 1 sec., and select “MENU” > “CODE CLR.  
Press the [AUD] knob for at least 1 second.  
When “ENTER” is displayed, “CODE CLR” is also  
displayed.  
Operation type  
Select the digits to enter  
Select the Security Code  
numbers  
Operation  
Press the [  
Turn the [AUD] knob, or press the  
[FM+]/ [AM–] button.  
4
] or [¢] button.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
4 Confirm the Security Code  
Press the [AUD] knob for at least 3 seconds.  
When “RE-ENTER” is displayed, “CODE” is also  
displayed.  
3 Enter Security Code  
Operation type  
Select the digits to enter  
Select the Security Code  
numbers  
Operation  
Press the [  
Turn the [AUD] knob, or press the  
[FM+]/ [AM–] button.  
4
] or [¢] button.  
5 Do the step 3 through 4 operation, and reenter  
the Security Code.  
“APPROVED” is displayed.  
4 Press the [AUD] knob for at least 3 seconds.  
“CLEAR” is displayed.  
The Security Code function deactivates.  
The Security Code function activates.  
5 Exit Security Code mode  
If you enter the wrong Code in steps 3 through 4, repeat  
from step 3.  
Press the [ ] button.  
When the Security Code function is activated, “CODE  
SET” changes to “CODE CLR.  
To deactivate the Security Code function, see the next  
section <Deactivating Security Code>.  
6 Exit Security Code mode  
Press the [ ] button.  
|
24 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Audio Adjustments  
AV output source  
Audio Control  
The sub source (DVD, USB) can be output to the AV  
output separately from the main source.  
- Set the preout to “AV” in “MENU” > “SWPRE” (page 10) of  
<Function Control>.  
- Adjust the volume of AV output source by <Audio  
Control> (page 25).  
You can adjust following Audio Control items ;  
Adjustment Item Display  
Rear volume “R-VOL”  
AV output volume “AVVOL”  
Range  
0 — 35  
0 — 35  
Subwoofer level  
Balance  
Fader  
“SW L”  
“BAL”  
“FAD”  
–15 — +15  
Left 15 — Right 15  
Rear 15 — Front 15  
- “USB” and “DVD” cannot be set at the same time for the  
main and AV output sources.  
Dual Zone System and the AV output source cannot  
be used at the same time. Turn off the setting currently  
used and then set the next function.  
Exit Audio Control mode (Volume control mode)  
1 Select the source to adjust  
1 Select the source to adjust  
Press the [SRC] button.  
Press the [SRC] button.  
2 Enter Audio Control mode  
2 Enter Audio Setup mode  
Press the [AUD] knob.  
Press the [AUD] knob for at least 1 second.  
3 Select the Audio item to adjust  
3 Select the Audio Setup item to adjust  
Press the [AUD] knob.  
Press the [AUD] knob.  
4 Adjust the Audio item  
4 Adjust the Audio setup item  
Turn the [AUD] knob.  
Turn the [AUD] knob.  
5 Exit Audio Control mode  
Press any button.  
Press a button other than the [AUD] knob or [0]  
button.  
5 Exit Audio Setup mode  
Press the [AUD] knob for at least 1 second.  
Audio Setup  
Preset Equalizer Select  
You can set Sound system, such as follows;  
You can select following Equalizer curve;  
Adjustment Item Display  
Volume offset “V-OFF”  
Dual Zone System “2ZON”  
Range  
Preset Equalizer Display  
Preset Equalizer Display  
–8 — 0 (AUX: -8— +8)  
OFF/ DVD/ USB/ AUX  
OFF/ DVD/ USB  
User*  
Rock  
Pops  
Easy  
Top 40  
“USER”  
“ROCK”  
“POPS”  
“EASY”  
“TOP40”  
Jazz  
Game  
iPod (During iPod  
source only)  
Natural  
“JAZZ”  
“GAME”  
“iPod”  
AV output source  
“AV/O”  
“NATURAL”  
Volume offset: Sets each source’s volume as a difference  
from the basic volume.  
* The Equalizer curve set in the section <Manual Equalizer  
Control> is recalled.  
Dual Zone System  
Main source and sub source (DVD, USB, AUX) output  
Front channel and Rear channel separately.  
- Set the preout to “R” or “SW” in “MENU” > “SWPRE” (page  
10) of <Function Control>.  
- Set up the channel of sub source by “ZONE2” of  
<Function Control> (page 11).  
- Select Main source by [SRC] button.  
- Adjust the volume of Front channel by [AUD] knob.  
- Adjust the volume of Rear channel by <Audio  
Control> (page 25) or [5]/[] button on the remote  
control (page 30).  
- The Audio Control has no effect on sub source.  
- “USB” and “DVD” cannot be set at the same time for the  
main and sub sources.  
1 Enter Preset Equalizer mode  
Press [ ] 1 sec., and select “DSP” > “CONTROL>  
“EQ” > “PRESET.  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 11).  
2 Select the Equalizer curve  
Turn the [AUD] knob and push the center when  
the desired item is displayed.  
You can select from 22 Equalizer curve types for  
iPod when “iPod” is selected.  
Next page 3  
English  
|
25  
Audio Adjustments  
Select the iPod Equalizer curve  
1. Enter iPod Equalizer mode  
Press the [AUD] knob.  
2. Select the iPod Equalizer curve  
Turn the [AUD] knob and push the center when  
the desired item is displayed.  
Preset position “PRESET”  
Adjustment Item Display  
Not compensating. “ALL”  
Adjustment Item Display  
Front-Right seat  
Front seat  
“F-RIGHT”  
“F-ALL”  
Front-Left seat  
“F-LEFT”  
Manual position “MANUAL”  
Adjustment Item Display Adjustment Item Display  
Front Left speaker “F-LEFT”  
Front Right speaker “F-RIGHT” Subwoofer Right  
Rear Left speaker “R-LEFT”  
Rear Right speaker “R-RIGHT”  
3 Exit Preset Equalizer mode.  
Subwoofer Left  
“SW-LEFT”  
Press the [ ] button.  
“SW-RIGHT”  
Initialize the setting “INITIAL”  
values.  
You can select for each source.  
1 Enter Preset position setting mode  
Press [ ] 1 sec., and select “DSP” > “CONTROL>  
“POSITION” > “PRESET.  
Manual Equalizer Control  
You can adjust following Equalizer Control items;  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
Adjustment Item  
Range  
-9 – 0 – +9  
“OFF”/ON”  
Band level “BAND#”>“GAIN”  
Bass Effect* “BAND1”>“EFFECT”  
2 Select the seat you want to compensate  
Turn the [AUD] knob and push the center when  
the desired item is displayed.  
*Can be only set for “BAND1.  
1 Enter Manual Equalizer Control mode  
Press [ ] 1 sec., and select “DSP” > “CONTROL>  
“EQ” > “MANUAL”.  
3 Exit Preset position setting mode  
Press the [ ] button.  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
You can fine-adjust your listening position.  
1 Enter Manual position adjust mode  
Press [ ] 1 sec., and select “DSP” > “CONTROL>  
“POSITION” > “MANUAL”.  
2 Select the band you want to set  
Turn the [AUD] knob and push the center.  
“BAND1” – “BAND5”  
Press the [AUD] knob.  
2 Select the speaker you want to set  
Turn the [AUD] knob and push the center.  
Selecting “INITIALinitializes the Manual position  
adjustment.  
3 Select the item you want to set  
Turn the [AUD] knob and push the center.  
4 Set the value  
Turn the [AUD] knob and push the center when  
the desired item is displayed.  
3 Set the value  
Turn the [AUD] knob and push the center when  
the desired value is displayed.  
Adjust between 0 and 170 cm.  
5 Exit Manual Equalizer Control mode  
Press the [ ] button twice.  
4 Exit Manual position adjust mode  
When “iPod” is selected in the section <Preset Equalizer  
select> (page 25), Manual Equalizer Control is disabled.  
You can select for each source.  
Press the [ ] button twice.  
About the position setting  
First, set the using environment with <DTA (Digital Time  
Alignment) Setting> (page 28).  
When using the Subwoofer Left and Subwoofer Right as  
a single sub woofer, set the left side and right side to the  
same value.  
Position Control  
According to the listening position, select the  
position from the following settings so that the  
normal position of the sound environment can  
be compensated in accordance with the selected  
position;  
|
26 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Cabin Selection  
Speaker Setting  
You can compensate the delay of the sound arrival  
time by selecting your environment from the  
following car types;  
Setting the speaker to be connected, speaker size,  
and installation position;  
Setting item  
Range  
Car type  
Not compensating. “OFF”  
Compact car  
Full size car  
Station wagon  
Display  
Car type  
Minivan  
Display  
“MINIVAN”  
Front Speaker Location  
“FRONT”>“LOCATION”  
Front Speaker Size  
“FRONT”>“SIZE”  
Front Tweeter  
“FRONT”>“TWEETER”  
Rear Speaker Location  
“REAR”>“LOCATION”  
“DOOR”/“ON DASH”/“UND DASH”(Under  
dash)  
O.E.M./ 10 cm/ 13 cm/ 16 cm/ 17 cm/ 18  
cm/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10  
“NONE”/“USE”  
“COMPACT” Sport-utility vehicle “SUV”  
“FULLSIZE” Minivan long  
“WAGON”  
“MV LONG”  
•“DOOR”/“R-DECK”  
2ND ROW”/“3RD ROW”(Minivan/  
Minivan long)  
None/ O.E.M./ 10 cm/ 13 cm/ 16 cm/  
17 cm/ 18 cm/ 4×6/ 5×7/ 6×8/ 6×9/  
7×10  
None/ 16 cm/ 20 cm/ 25 cm/ 30 cm/  
38 cm over  
1 Enter Cabin select mode  
Press [ ] 1 sec., and select “DSP” > “SETUP” >  
“CABIN.  
Rear Speaker Size  
“REAR”>“SIZE”  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
Subwoofer Size  
“SUB-W”>“SIZE”  
2 Select the car type  
Turn the [AUD] knob and push the center when  
the desired item is displayed.  
1 Enter Speaker Setting mode  
Press [ ] 1 sec., and select “DSP” > “SETUP” >  
“SPEAKER.  
3 Exit Cabin select mode  
Press the [ ] button.  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
You can compensate the distances in more details by  
using <DTA setting> (page 28) function.  
2 Select the speaker you want to set  
Turn the [AUD] knob and push the center.  
“FRONT”/ “REAR”/ “SUB-W”  
3 Select the item you want to set  
Turn the [AUD] knob and push the center.  
4 Set the value  
Turn the [AUD] knob and push the center when  
the desired item is displayed.  
5 Exit Speaker Setting mode  
Press the [ ] button twice.  
English  
|
27  
Audio Adjustments  
X’Over Setting  
DTA (Digital Time Alignment) Setting  
You can set a X’Over value for the speakers;  
Adjusting fine tuning of the speaker position  
compensation value specified at <Cabin selection>  
(page 27).  
Setting item  
Range  
Front High Pass Filter  
“FRONT”>“FC”  
“THRU”(Through)/ 30/ 40 / 50/  
60/ 70/ 80/ 90/ 100/ 120/ 150/  
180/ 220/ 250 Hz  
1 Enter DTA setting mode  
Press [ ] 1 sec., and select “DSP” > “SETUP” >  
“DTA.  
Rear High Pass Filter  
“REAR”>“FC”  
Front High Pass Slope  
“FRONT”>“SLOPE”  
Rear High Pass Slope  
“REAR”>“SLOPE”  
Subwoofer Low Pass Filter  
“SUB-W”>“FC”  
-6/ -12/ -18/ -24 dB/Oct.  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/  
120/ 150/ 180/ 220/ 250 Hz/  
“THRU”(Through)  
2 Select the speaker you want to set  
Turn the [AUD] knob and push the center.  
“FRONT” (Front speaker)/ “REAR” (Rear speaker)/  
“SUB-W” (Subwoofer )  
Subwoofer Low Pass Slope  
“SUB-W”>“SLOPE”  
Subwoofer Phase  
-6/ -12/ -18/ -24 dB/Oct.  
REVERSE (180°)/ NORMAL (0°)  
3 Set the compensation value of the speaker  
position  
“SUB-W”>“PHASE”  
Turn the [AUD] knob and push the center when  
the desired value is displayed.  
Adjust between 0 and 440 cm.  
Refer to <Appendix> (page 31) on how to set  
the compensation value.  
1 Enter X’Over setting mode  
Press [ ] 1 sec., and select “DSP” > “SETUP” >  
“X’OVER.  
Press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
4 Exit DTA setting mode  
Press the [ ] button.  
2 Select the speaker you want to set  
Turn the [AUD] knob and push the center.  
“FRONT”/ “REAR”/ “SUB-W”  
3 Select the item you want to set  
Turn the [AUD] knob and push the center.  
4 Set the X’Over value  
Turn the [AUD] knob and push the center when  
the desired value is displayed.  
5 Exit X’Over setting mode  
Press the [ ] button twice.  
|
28 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Audio Preset Memory  
Audio Preset Recall  
Registering the value setup by Sound Control.  
Recalling the sound setup registered by <Audio  
Preset Memory> (page 29).  
1 Setup Sound Control  
Refer to the following operations to setup the  
Sound Control.  
1 Select the source  
Press the [SRC] button.  
- Cabin selection (page 27)  
- Speaker Setting (page 27)  
2 Enter Audio Preset Recall mode  
Press [ ] 1 sec., and select “DSP” > “PRESET”>  
“RECALL”.  
- DTA (Digital Time Alignment) setting (page 28)  
- X’Over setting (page 28)  
- Preset Equalizer Select (page 25)  
- Manual Equalizer Control (page 26)  
- Position Control (page 26)  
Press the [AUD] knob for at least 1 second.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
3 Select the number to recall in the memory  
Turn the [AUD] knob to select number, and then  
press the [AUD] knob.  
2 Enter Audio Preset Memory mode (Other than  
Standby mode)  
Press [ ] 1 sec., and select “DSP” > “PRESET” >  
“MEMORY.  
Press the [AUD] knob for at least 1 second.  
“USER1” – “USER6”  
4 Recall the Audio Preset  
Turn the [AUD] knob to select “YES, and then  
press the [AUD] knob.  
For how to select Function Control items, refer to  
<Function Control> (page 10).  
“COMPLETE” is displayed.  
3 Select the number to put in the memory  
Turn the [AUD] knob to select number, and then  
press the [AUD] knob.  
5 Exit Function Control mode  
Press the [ ] button for at least 1 second.  
“USER1” – “USER6”  
The User memory of <Preset Equalizer Select> (page 25)  
is changed to the value which was recalled.  
The source tone memory item of <Preset Equalizer  
Select> (page 25) is changed to the value which was  
recalled by the selected source.  
4 Put the Audio Preset in the memory  
Turn the [AUD] knob to select “YES, and then  
press the [AUD] knob.  
“COMPLETE” is displayed.  
5 Exit Function Control mode  
Press the [ ] button for at least 1 second.  
Register 6 pairs of Audio Preset Memory.  
“USER1”: When you press the Reset, all the sources will  
be the setting value which is registered.  
“USER1, USER2”:  
The memory cannot be erased by the Reset button.  
This function cannot be registered when the iPod  
Equalizer set in <Equalizer Control> (page 25).  
English  
|
29  
Basic Operations of Remote Control  
Dual Zone Control  
SRC  
OSD  
SRC  
TOP MENU  
AUDIO  
MENU  
SETUP  
RETURN  
ZOOM  
Select sub source of Dual zone system: [2 ZONE]  
SUBTITLE  
ANGLE  
AUDIO  
ꢁꢂ  
Rear channel volume control: [R.VOL]  
ꢁꢂ  
AUD  
U
U
O
AUD  
U
U
In Tuner Source (AUD mode)  
ENTER  
DVD  
DVD  
O
O
Band select: [FM+]/[AM–]  
Station select: [4]/[¢]  
Recall preset stations: [1] — [6]  
/D  
FM+/AM–  
VOL  
O
VOL  
2 ZONE  
2ZONE  
1
2ABC 3DEF  
R.VOL  
4GHI 5JKL 6MNO  
0 — 9  
7PQRS 8TUV 9WXYZ  
R.VOL  
ATT  
In DVD/USB/iPod Source (DVD mode)  
DIRECT  
ATT  
0
(page 18)  
Refer to <Disc/ USB Operations of remote control>  
(page 16).  
Refer to <iPod Operations of remote control> (page  
20).  
Remote Controller Mode Switch  
The functions operated from the remote controller  
differ depending on the position of the mode switch.  
AUD mode: [AUD]  
About [  
]
Switch to this mode when controlling a selected  
source or tuner source, etc.  
This button is used when Bluetooth HANDS FREE  
BOX is connected. For more information, refer to the  
instruction manual of Bluetooth HANDS FREE BOX.  
DVD mode: [DVD]  
Switch to this mode when playing DVDs or USB etc.  
Loading and Replacing battery  
with the player integrated in this unit.  
Use two “AAA”/“R03”-size batteries.  
Insert the batteries with the + and – poles aligned  
properly, following the illustration inside the case.  
Switch the mode switch to AUD or DVD position. With the  
mode switch in the middle, the remote controller cannot  
operate.  
General Control  
Volume control: [VOL]  
Source select: [SRC]  
Volume reduce: [ATT]  
When the button is pressed again, the volume returns  
to the previous level.  
¤CAUTION  
Do not leave the battery near fire or under direct  
sunlight. A fire, explosion or excessive heat generation  
may result.  
In Audio Control (AUD mode)  
Do not set the remote control in hot places such as on  
the dashboard.  
Audio item select: [AUDIO]  
Adjust the Audio item: [VOL]  
Refer to <Audio Control> (page 25) for the operation  
method, such as the procedures for Audio control and  
others operations.  
|
30 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Appendix  
For operating KCA-BT300 (Optional)  
Function Glossary  
For operation refer to Model-A in the Instruction  
Manual of KCA-BT300, and the table below. The  
[AUTO]/[TI] button should be replaced with [SRC]  
button for <Answering the Waiting Call after  
Terminating>.  
“AUTO1, AUTO2, MANUAL(Tuning mode  
select)  
Select a tuning mode of the radio.  
Tuning mode  
Display Operation  
Auto seek  
“AUTO1” Automatic search for a station.  
Set the Type Swith on KCA-BT300 as folllows.  
1: OFF, 2: OFF, 3: OFF  
Set the remote controller mode switch to “AUD” mode  
before starting operation.  
Preset station seek “AUTO2” Search in order of the stations in the  
Preset memory.  
Manual  
“MANUALNormal manual tuning control.  
AUX  
Notation used in the KCA-BT300 Operation  
Instruction Manual  
When this is set to ON, AUX source can be selected.  
ON1: Allows AUX source to be selected. Use this  
setting when the built-in AUX terminal is  
connected to the external equipment all the  
time.  
[38] button  
Control knob  
[AUD] knob*1  
[AUD] knob  
[AUTO]/[TI] button  
[DISP] button  
Control knob towards up or down  
Control knob towards left or right  
[FM+] or [AM–] button  
[4] or [¢] button  
ON2: Activates the attenuator function when  
turning on the power with AUX source  
selected. Cancel the attenuator function  
by turning the volume knob clockwise  
when listening to the audio of the external  
equipment.  
*1 Use the [38] button for the operation of <Switching to the  
Private Mode>.  
For operating KCA-BT200 (Optional)  
OFF: Disable AUX source selection. Use this setting  
when the built-in AUX terminal is not used.  
DTA (Digital Time Alignment)  
Make fine adjustment of the delay time of the  
speaker output specified at <Cabin selection>  
(page 27) to have a more suitable environment for  
your vehicle.  
The settings of the delay time are automatically  
identified and compensated by specifying the  
distances of each speaker from the center of the  
vehicle interior.  
1 Set the front and rear positions and the height  
of the reference point to the position of the ears  
of the person sitting in the front seat, and set  
the right and left positions to the center of the  
vehicle interior.  
For operation refer to Model-A-1 in the Instruction  
Manual of KCA-BT200, and the table below. The  
[AUTO]/[TI] button should be replaced with [SRC]  
button for <Answering the Waiting Call after  
Terminating>.  
Set the remote controller mode switch to “AUD” mode  
before starting operation.  
Notation used in the KCA-BT200 Operation  
Instruction Manual  
[38] button  
Control knob  
[AUD] knob*1  
[AUD] knob  
[AUTO]/[TI] button  
[DISP] button  
Control knob towards up or down  
Control knob towards left or right  
[FM+] or [AM–] button  
[4] or [¢] button  
2 Measure the distances from the reference point  
to the speakers.  
*1 Use the [38] button for the operation of <Switching to the  
Private Mode>.  
3 Calculate the distance difference in accordance  
with the farthest speaker.  
Next page 3  
English  
|
31  
Appendix  
+100cm  
50cm  
80cm  
150cm  
+70cm  
+0cm  
“HIGHWAY” (Highway sound)  
Increases the volume of faintest sound being lost  
by road noises to make the sound more audible.  
Additionally, it accentuates bass sound being  
lost by road noises to make the bass sound more  
dynamic.  
“ICON”  
Sets the Graphics mode of the display during  
normal playback condition.  
ON1: Turns on.  
ON2: Displays an animation.  
OFF: Turns off.  
“SWPRE” (Switching Preout)  
Switches the preout between rear output (“R”),  
subwoofer output (“SW”), and DVD/USB source  
output (“AV”).  
“ZONE2” (Dual Zone)  
Set the destination (front speaker “F” or rear speaker  
“R”) of the sub source (DVD/USB/AUX) when the  
Dual Zone function is turned on.  
|
32 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Language code list  
Code  
Language  
English  
Spanish  
French  
German  
Italian  
Dutch  
Swedish  
Danish  
Code  
HI  
HR  
HU  
HY  
IA  
IE  
IK  
IN  
IS  
IW  
JI  
JW  
KA  
KK  
KL  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
Language  
Hindi  
Croatian  
Code  
RO  
RW  
SA  
SD  
SG  
SH  
SI  
Language  
Romanian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Serbo-Croatian  
Singhalese  
Slovak  
ENGLISH  
SPANISH  
FRENCH  
GERMAN  
ITALIAN  
DUTCH  
SWEDISH  
DANISH  
RUSSIAN  
CHINESE  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
Hebrew  
SK  
SL  
Russian  
Chinese  
Slovenian  
Samoan  
Shona  
SM  
SN  
SO  
SQ  
SR  
SS  
PORTUGUESE Portuguese  
Yiddish  
JAPANESE  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DZ  
EL  
EO  
ET  
EU  
FA  
FI  
FJ  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
Japanese  
Afar  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean  
Kashmiri  
Kurdish  
Kirghiz  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swahili  
Tamil  
Telugu  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
Twi  
Ukrainian  
Urdu  
ST  
SU  
SW  
TA  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
Latin  
Lingala  
Laotian  
LT  
LV  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Malay  
Maltese  
Burmese  
Nauru  
Nepali  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Punjabi  
Polish  
Pashto, Pushto  
Quechua  
Rhaeto-Romance  
Kirundi  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NO  
OC  
OM  
OR  
PA  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Uzbek  
Vietnamese  
Volapuk  
Wolof  
Xhosa  
Yoruba  
Zulu  
Faroese  
Frisian  
Irish  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
PL  
PS  
QU  
RM  
RN  
English  
|
33  
Accessories/ Installation Procedure  
If the power is not turned ON (“PROTECT” is displayed),  
the speaker wire may have a short-circuit or touched the  
chassis of the vehicle and the protection function may  
have been activated. Therefore, the speaker wire should be  
checked.  
If your car’s ignition does not have an ACC position, connect  
the ignition wires to a power source that can be turned on  
and off with the ignition key. If you connect the ignition  
wire to a power source with a constant voltage supply, as  
with battery wires, the battery may die.  
If the console has a lid, make sure to install the unit so that  
the faceplate will not hit the lid when closing and opening.  
If the fuse blows, first make sure the wires aren’t touching  
to cause a short circuit, then replace the old fuse with one  
with the same rating.  
Accessories  
1
2
3
4
5
..........1  
..........2  
..........4  
..........4  
Insulate unconnected wires with vinyl tape or other similar  
material. To prevent a short circuit, do not remove the caps  
on the ends of the unconnected wires or the terminals.  
Connect the speaker wires correctly to the terminals to  
which they correspond. The unit may be damaged or fail to  
work if you share the - wires or ground them to any metal  
part in the car.  
When only two speakers are being connected to the  
system, connect the connectors either to both the front  
output terminals or to both the rear output terminals (do  
not mix front and rear). For example, if you connect the +  
connector of the left speaker to a front output terminal, do  
not connect the - connector to a rear output terminal.  
After the unit is installed, check whether the brake lamps,  
blinkers, wipers, etc. on the car are working properly.  
Mount the unit so that the mounting angle is 30° or less.  
..........1 (2m)  
Installation Procedure  
1. To prevent a short circuit, remove the key from the  
ignition and disconnect the - battery.  
2. Make the proper input and output wire  
connections for each unit.  
3. Connect the speaker wires of the wiring harness.  
4. Connect the wiring harness wires in the following  
order: ground, battery, ignition.  
5. Connect the wiring harness connector to the unit.  
6. Install the unit in your car.  
7. Reconnect the - battery.  
8. Press the reset button.  
About CD players/disc changers connected  
to this unit  
If the CD player/ disc changer has the “O-N” switch, set  
it to the “N” position.  
The functions you can use and the information that  
can be displayed may differ depending on the models  
being connected.  
2WARNING  
If you connect the ignition wire (red) and the battery wire  
(yellow) to the car chassis (ground), you may cause a short  
circuit, that in turn may start a fire. Always connect those  
wires to the power source running through the fuse box.  
¤
Mounting and wiring this product requires skills and  
experience. For safety’s sake, leave the mounting and wiring  
work to professionals.  
Install this unit in the console of your vehicle. Do not touch  
the metal part of this unit during and shortly after the use  
of the unit. Metal part such as the heat sink and enclosure  
become hot.  
Make sure to ground the unit to a negative 12V DC power  
supply.  
Do not install the unit in a spot exposed to direct sunlight  
or excessive heat or humidity. Also avoid places with too  
much dust or the possibility of water splashing.  
Do not use your own screws. Use only the screws provided.  
If you use the wrong screws, you could damage the unit.  
|
34 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Connecting Wires to Terminals  
AUX input (Stereo)  
Use the mini-plug cable which is  
stereo type and does not have any  
resistance.  
For the sake of safety, be sure to  
connect the parking sensor.  
Light Green (Parking sensor wire)  
Connect to the vehicle’s  
PRK SW  
parking brake detection  
switch harness.  
Light Green  
(Extension cable: Accessory3)  
USB connector  
Yellow (Visual output)  
FM/AM antenna input  
Front side  
L
R
Rear output/ Sub Woofer output/  
AV output (audio)  
Fuse (10A)  
Wiring harness  
(Accessory1)  
To Kenwood disc changer/ External optional accessory  
To connect these leads, refer to the relevant instruction manuals.  
White  
White/Black  
To front left speaker  
To front right speaker  
To rear left speaker  
To rear right speaker  
Gray  
Gray/Black  
Green  
Green/Black  
Purple  
Purple/Black  
If no connections are made, do not let the wire come out from the tab.  
Blue/White  
(Power control/ Antenna control wire)  
Connect either to the power control terminal when using the optional  
power amplifier, or to the antenna control terminal in the vehicle.  
P.CONT  
Blue  
(Antenna control wire)  
Depending on what antenna you are using, connect either to the control  
terminal of the motor antenna, or to the power terminal for the booster  
amplifier of the film or short pole-type antenna.  
ANT.  
CONT  
Brown  
Not used.  
MUTE  
Car fuse box  
ACC  
Ignition key switch  
Red (Ignition wire)  
Yellow (Battery wire)  
Car fuse box  
(Main fuse)  
Black (Ground wire) - (To car chassis)  
Battery  
English  
|
35  
Installation/Removing the Unit  
Non-Japanese cars  
Removing the hard rubber frame  
1 Engage the catch pins on the removal tool and  
remove the two locks on the upper level.  
Upper the frame and pull it forward as shown in  
the figure.  
Lock  
Catch  
Bend the tabs of the mounting  
sleeve with a screwdriver or similar  
utensil and attach it in place.  
Accessory2  
Removal tool  
Make sure that the unit is installed securely in place. If the  
unit is unstable, it may malfunction (for example, the sound  
may skip).  
2 When the upper level is removed, remove the  
lower two locations.  
Japanese cars  
The frame can be removed from the bottom side in the  
same manner.  
1 Refer to the section <Removing the hard rubber  
frame> and then remove the hard rubber frame.  
Removing the Unit  
2 Align the holes in the unit (two locations on each  
side) with the vehicle mounting bracket and secure  
the unit with the accessory screws.  
1 Refer to the section <Removing the hard rubber  
frame> and then remove the hard rubber frame.  
2 Insert the two removal tools deeply into the slots  
T
N
on each side, as shown.  
T/N  
3 Lower the removal tool toward the bottom, and  
pull out the unit halfway while pressing towards  
the inside.  
T
N
T: Toyota cars  
N: Nissan cars  
Accessory2  
8 mm  
MAX.  
8mm  
MAX.  
4
5
ø5mm  
ø5mm  
Accessory4...for Nissan car  
Accessory5...for Toyota car  
¤
Be careful to avoid injury from the catch pins on the  
removal tool.  
¤ CAUTION  
Install this unit in the console of your vehicle.  
Do not touch the metal part of this unit during and  
shortly after the use of the unit. Metal part such as  
the heat sink and enclosure become hot.  
4 Pull the unit all the way out with your hands, being  
careful not to drop it.  
|
36 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Troubleshooting Guide  
Some functions of this unit may be disabled by  
some settings made on this unit.  
What might seem to be a malfunction in your unit  
may just be the result of slight misoperation or  
miswiring. Before calling service, first check the  
following table for possible problems.  
!
• Cannot set up the subwoofer.  
• Cannot set up the low pass filter.  
• Cannot set up subwoofer phase.  
• No output from the subwoofer.  
• <Subwoofer output> of <Basic Operation> (page 8)  
is not set to On.  
Tuner source  
? Radio reception is poor.  
The car antenna is not extended.  
• Preout is not set to subwoofer. “MENU” > “SWPRE”  
of <Function Control> (page 10)  
Pull the antenna out all the way.  
• The Dual zone function is enabled.  
<Audio Setup> (page 25)  
Disc source  
? The specified disc does not play, but another one  
plays instead.  
!
• Cannot set up the equalizer.  
The specified disc is quite dirty.  
• Cannot set up the crossover network.  
• Cannot set up Digital Time Alignment.  
• Cannot select the “CONTROLin “DSP.  
• Cannot select the “SETUP” in “DSP.  
• The Dual zone function is enabled. <Audio  
Setup> (page 25)  
Clean the disc, referring to the disc cleaning of  
the section on <Handling discs> (page 3).  
The disc is loaded in a different slot from that  
specified.  
Eject the disc magazine and check the number  
for the specified disc.  
• The DSP function is disabled. “DSP” > “DSP SET” of  
<Function Control> (page 11)  
• In the speaker select option, None is selected for  
The disc is severely scratched.  
Try another disc instead.  
the rear speakers. <Speaker Setting> (page 27)  
Audio file source  
? The sound skips when an Audio file is being  
!
!
Cannot set up the Dual zone.  
The AV output function is enabled.  
<Audio Setup> (page 25)  
played.  
The media is scratched or dirty.  
Clean the media, referring to the disc cleaning of  
the section on <Handling discs> (page 3).  
• Cannot set up the AV output.  
• Cannot select the “SWPRE” in “MENU.  
The Dual zone function is enabled.  
<Audio Setup> (page 25)  
The recording condition is bad.  
Record the media again or use another media.  
!
!
• Cannot register a security code.  
• Cannot set up Display.  
<Demonstration mode Setting> (page 7) is not  
turned off.  
• Cannot switch to DVD or USB source.  
• The Dual zone function is set to DVD or USB.  
<Audio Setup> (page 25)  
• AV output source is set to USB or DVD.  
<Audio Setup> (page 25)  
English  
|
37  
Troubleshooting Guide  
NA DVICE:  
• An unsupported USB device is connected.  
• Connection to the iPod has failed.  
Check that the connected iPod is an iPod  
that is supported. See <About Audio file>  
(page 4) for information on supported  
iPods.  
The messages shown below display your  
systems condition.  
TOC ERR:  
• The disc is quite dirty. The disc is upside-  
down. The disc is scratched a lot.  
• No disc has been loaded in the disc  
magazine.  
NO MUSIC/E-15:  
USB ERR:  
• The connected USB device contains no  
playable audio file.  
• Media was played that does not have data  
recorded that the unit can play.  
E-05:  
E-77:  
The disc is unreadable.  
The unit is malfunctioning for some reason.  
Press the reset button on the unit. If the  
“E-77” code does not disappear, consult  
your nearest service center.  
Some trouble may have occurred to the  
connected USB device.  
Remove the USB device, turn off the unit,  
wait for about 10 seconds, and then turn  
on the unit again. If the same display is  
repeated, use another USB device.  
E-99:  
Something is wrong with the disc magazine.  
Or the unit is malfunctioning for some reason.  
Check the disc magazine. And then press  
the reset button on the unit. If the “E-99”  
code does not disappear, consult your  
nearest service center.  
iPod ERR:  
Connection to the iPod has failed.  
Remove the USB device and then  
reconnect it.  
Confirm that the software for the iPod is  
the latest version.  
MEC ERR:  
IN (Blink):  
The unit is malfunctioning for some reason.  
Press the [0] button on the unit. If the  
error message does not disappear when  
you eject the disc and insert it again,  
consult your nearest service center.  
REG ERR:  
The disc you wanted to play has a region  
code that cannot be played with this unit.  
The DVD player section is not operating  
properly.  
PARK OFF:  
Source for displaying video is selected while  
car is traveling.  
Video will be displayed when the car is  
stopped and the parking brake has been  
engaged.  
Press the [DISP] button for at least 1  
second. The display of this unit can be  
temporarily hidden.  
Reinsert the disc. If the disc cannot be  
ejected or the display continues to flash  
even when the disc has been properly  
reinserted, please switch off the power  
and consult your nearest service center.  
PROTECT (Blink):  
The speaker wire has a short-circuit or  
touches the chassis of the vehicle, and then  
the protection function is activated.  
Wire or insulate the speaker cable  
properly and press the reset button. If  
the “PROTECT” code does not disappear,  
consult your nearest service center.  
READING:  
The unit is reading the data on the media.  
NA FILE:  
An Audio file is played with a format that this  
unit can’t support.  
COPY PRO:  
READ ERR:  
A copy-protected file is played.  
The file system of the connected USB device  
is broken.  
Copy the files and folders for the USB  
device again. If the error message is still  
displayed, initialize the USB device or use  
other USB devices.  
NO DVICE:  
The USB device is selected as a source  
although no USB device is connected.  
Change the source to any source other  
than USB. Connect an USB device, and  
change the source to USB again.  
|
38 KDV-U4349/ KDV-U4349M/ KDV-U4449  
Specifications  
FM tuner section  
USB Interface  
Frequency Range  
200 kHz space : 87.9 MHz – 107.9 MHz  
USB Standard  
: USB1.1/ 2.0  
50 kHz space : 87.5 MHz – 108.0 MHz  
Usable Sensitivity (S/N = 30dB)  
: 9.3dBf (0.8 μV/75 Ω)  
Data Transfer Rate  
Full Speed : Maximum 12 Mbps  
Low Speed : Maximum 1.5 Mbps  
Quieting Sensitivity (S/N = 50dB)  
: 15.2dBf (1.6 μV/75 Ω)  
Compatible Device  
: Mass storage class  
Frequency Response ( 3 dB)  
: 30 Hz – 15 kHz  
Maximum Supply Current  
: 500 mA  
Signal to Noise Ratio (MONO)  
: 70 dB  
File System  
: FAT 32/ 16/ 12  
Selectivity ( 400 kHz)  
: ≥ 80 dB  
Playable Video/ Audio Format  
: MPEG1/ MPEG2/ DivX/ MP3/ WMA/ WAV  
Stereo Separation (1 kHz)  
: 40 dB  
Video Section  
Video Output Level  
: 1 Vp-p (75 Ω)  
Color System  
AM tuner section  
Frequency Range  
10 kHz space : 530 kHz – 1700 kHz  
: NTSC/ PAL  
9 kHz space : 531 kHz – 1611 kHz  
Usable Sensitivity (S/N = 20dB)  
: 28 dBμ (25 μV)  
Audio Section  
Maximum Output Power  
: 50 W x 4  
DVD player section  
D/A Converter  
: 24 Bit  
Audio Decoder  
: Linear PCM/ Dolby digital/ MP3/ WMA/ WAV  
Video Decoder  
: MPEG1/ MPEG2/ DivX  
Wow & Flutter  
: Below Measurable Limit  
Frequency Response  
Sampling frequency; 96 kHz : 16 – 22,000 Hz  
Full Bandwidth Power (at less than 1% THD)  
: 22 W x 4  
Speaker Impedance  
: 4 – 8 Ω  
Tone Action  
Frequency (BAND1 – 5): 60/ 250/ 1k/ 4k/ 16k Hz  
Gain : 9 dB  
Preout Level / Load (DVD/CD)  
: 2500 mV/10 kΩ  
Preout Impedance  
: ≤ 600 Ω  
Sampling frequency; 48 kHz : 16 – 22,000 Hz  
Sampling frequency; 44.1 kHz : 16 – 20,000 Hz  
Signal to Noise Ratio (1 kHz)  
: 95 dB  
Dynamic Range  
Sampling frequency; 96 kHz : 100 dB  
Sampling frequency; 48/ 44.1 kHz : 90 dB  
Disc Format  
: DVD-Video/ VIDEO-CD/ CD-DA  
Sampling Frequency  
: 44.1/ 48/ 96 kHz  
Quantifying Bit Number  
: 16/ 20/ 24 bit  
Auxiliary Input  
Frequency Response  
: 20 Hz – 20 KHz ( 3dB)  
Input Maximum Voltage  
: 1200 mV  
Input Impedance  
: 10 kΩ  
General  
Operating Voltage (10.5 – 16V allowable)  
: 14.4 V  
Maximum Current consumption  
: 10 A  
Installation Size (W x H x D)  
: 182 x 53 x 156 mm  
Weight  
: 1.3 kg  
Specifications subject to change without notice.  
English  
|
39  
For Turkey  
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan  
Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin  
Kullanımının Sınırlandırılmasına Dair Yönetmeliğe  
uygun olarak üretilmiştir.  
This product complies with Directive, Number 26891  
regarding “REGULATION ON THE RESTRICTION OF  
THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN  
ELECTRICAL AND ELECTRONIC EQUIPMENT.  
KDV-U4349M:  
The marking of products using lasers  
Declaration of Conformity with regard to  
the EMC Directive 2004/108/EC  
CLASS 1  
LASER PRODUCT  
Manufacturer:  
Kenwood Corporation  
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan  
The label is attached to the chassis/case and says  
that the component uses laser beams that have been  
classified as Class 1. It means that the unit is utilizing  
laser beams that are of a weaker class. There is no  
danger of hazardous radiation outside the unit.  
EU Representative’s:  
Kenwood Electronics Europe BV  
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands  
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.  
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect  
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple  
performance standards. Apple is not responsible for the operation of this device or its compliance with safety  
and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless  
performance.  
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and  
other countries.  
ABOUT DIVX VIDEO:  
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX  
video. Visit divx.com for more information and software tools to convert your files into DivX video.  
ABOUT DIVX VIDEO-ON-DEMAND:  
This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)  
movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.  
divx.com for more information on how to complete your registration.  
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license.  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby Laboratories.  
This product incorporates copyright protection technology that is protected by U.S. patents and other  
intellectual property rights of Rovi Corporation. Reverse engineering or disassembly is prohibited.  

Pelco Camera Lens 12ZV85X6C(P) (CE) User Manual
Onkyo Car Stereo System CR 325UKD User Manual
Omega OSD20 User Manual
Olympus MACRO ED50MM F20 User Manual
NEC Electronics America Calculator NDA 30103 004 User Manual
Melissa 646 048 User Manual
Meade ETX User Manual
Meade CV 5 User Manual
Lochinvar PB 1701(M9) User Manual
KitchenAid KFP750BW2 User Manual